1. Kupu Whakataki
This manual provides detailed instructions for the installation, operation, and maintenance of your Speco SP4AWET 4-inch Outdoor Speaker with Transformer. Designed for outdoor environments, this speaker features a durable, weather-resistant enclosure and a versatile mounting bracket. It includes an integrated transformer for use in 70V/100V constant voltage audio systems, with the option to bypass the transformer for standard 8-ohm low-impedance applications.
Please read this manual thoroughly before installation and use to ensure proper setup and optimal performance.
2. Nga Hua o te Hua
- Rounded, Stylish Design: Ataahua te āhuaasing enclosure suitable for various outdoor settings.
- Horizontal-Swivel Mounting Bracket: Allows for flexible positioning and sound direction adjustment.
- Hoahoa Atete-huarere: Constructed to withstand outdoor elements, ensuring durability.
- Integrated Transformer: Supports 70V/100V constant voltage systems, with an option for 8-ohm bypass.
- Woofer 4-inihi: Provides clear audio output for outdoor applications.
3. Nga korero haumaru
- Momotuhia i nga wa katoa te hiko ki te amplifier or audio system before performing any wiring or installation.
- Me whakarite kia mau nga hononga waea katoa, kia tika hoki te kiriweti kia kore ai nga ara iahiko poto.
- While weather-resistant, it is recommended to install the speaker under cover or in a sheltered location for prolonged lifespan and optimal performance, especially in harsh weather conditions.
- Do not expose the speaker to direct water jets or submersion. This product is not waterproof.
- Mena kāore koe i te tino mōhio ki ngā mahi tāutanga, whakapā atu ki tētahi tohunga hiko, ki tētahi tohunga hangarau oro rānei.
- Kaua e taea e nga tamariki nga taonga takai.
4. Ihirangi mokete
Tena koa tirohia kei roto nga taonga katoa kei roto i te kete:
- One (1) Speco SP4AWET 4-inch Outdoor Speaker
- One (1) Horizontal-swivel mounting bracket
- Ko nga taputapu whakapuru (ngiu, horoi, aha atu)
5. Tatūnga me te Tāuta
5.1 Te Kōwhiri Tauwāhi
Select a suitable outdoor location that provides the desired sound coverage. Consider mounting the speaker under eaves, on a patio, or in another sheltered area to protect it from direct exposure to heavy rain or extreme weather, which can extend its lifespan.
5.2 Te Whakaeke i te Kai-korero
- Position the horizontal-swivel mounting bracket against the desired mounting surface (wall, ceiling, etc.).
- Mark the screw holes through the bracket onto the surface.
- Drill pilot holes if necessary, appropriate for the mounting hardware.
- Secure the bracket firmly to the surface using the provided mounting hardware. Ensure the bracket is stable and can support the speaker's weight.
- Attach the speaker to the mounted bracket. The swivel mechanism allows for adjustment of the speaker's angle horizontally. Tighten the adjustment knob once the desired angle is achieved.
This image displays the Speco 4-inch outdoor speaker in black, featuring a protective metal grille on the front and a horizontal-swivel mounting bracket visible on the side. The speaker has a rounded, weather-resistant enclosure, ready for installation.
6. Waea me te Hononga
The Speco SP4AWET speaker is designed for flexible wiring options, supporting both 70V/100V constant voltage systems and standard 8-ohm low-impedance connections. Always ensure the ampKa wetohia te riipene i mua i te hono atu.
6.1 70V/100V Constant Voltage System Connection
For installations requiring multiple speakers over long distances, connect the speaker to a 70V or 100V amplifier output. The integrated transformer allows you to select different power taps (e.g., 5W, 10W, 20W) to control the speaker's volume output. Refer to the speaker's wiring terminals for specific tap settings.
- Connect the positive (+) terminal of the speaker to the corresponding 70V/100V output terminal on your ampkaikawe
- Connect the negative (-) terminal of the speaker to the common (COM) terminal on your ampkaikawe
- Ensure the correct power tap is selected on the speaker for your system's requirements.
6.2 8-Ohm Low-Impedance Connection
If connecting to a standard low-impedance amplifier (e.g., home stereo receiver), you can bypass the internal transformer to operate the speaker at 8 ohms. This typically involves connecting directly to the speaker's driver terminals, bypassing the transformer's input. Consult the speaker's internal wiring diagram or a qualified technician for instructions on bypassing the transformer.
- Carefully open the speaker enclosure to access the internal wiring.
- Locate the transformer and its connections to the speaker driver.
- Disconnect the speaker driver from the transformer and connect it directly to the external input terminals, ensuring an 8-ohm impedance path.
- Connect the positive (+) terminal of the speaker to the positive (+) 8-ohm output terminal on your ampkaikawe
- Connect the negative (-) terminal of the speaker to the negative (-) 8-ohm output terminal on your ampkaikawe
Note on Connectivity: This is a passive speaker. The 'Bluetooth' and 'Touch Control' mentioned in some product descriptions refer to the capabilities of compatible source devices (e.g., smartphones, tablets) or the amplifier connected to this speaker, not features of the speaker itself. The speaker receives its audio signal via wired connections from an ampkaikawe
7. Mahi
Once the speaker is correctly installed and wired to an appropriate amplifier, operation is straightforward:
- Me whakarite kia mau nga hononga katoa.
- Hurihia to amphe punaha ororongo ranei.
- Select your desired audio source (e.g., MP3 player, smartphone, television).
- Whakaritea te rōrahi i runga i tō amphe pai ki te taumata whakarongo pai.
- If using a 70V/100V system, ensure the power tap setting on the speaker is appropriate for the desired volume and system load.
8. Tiaki
To ensure the longevity and optimal performance of your Speco SP4AWET speaker, follow these maintenance guidelines:
- Te horoi: Horoia a waho o te kaikōrero ki te ngohengohe, damp kakahu. A ape i te whakamahi i nga matū kino, i nga kai horoi horoi, na te mea ka pakaru te mutunga.
- Tirotiro: Periodically check the mounting bracket and connections for any signs of loosening or corrosion. Tighten screws as needed.
- Parenga huarere: While weather-resistant, prolonged exposure to extreme weather conditions (e.g., direct heavy rain, snow, intense sunlight) can affect the speaker's lifespan. Consider additional protective measures or repositioning if possible.
- Aukati i nga arai: Ensure the speaker grille is free from debris, leaves, or insect nests that could impede sound output.
9. Te Raru
If you encounter issues with your speaker, refer to the following common troubleshooting steps:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Karekau he oro mai i te kaikorero |
|
|
| He kino, he kino ranei te kounga oro |
|
|
| Ka tapahi te kaikorero mo etahi wa |
|
|
10. Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Ingoa Tauira | SP4AWET |
| Momo Kaikorero | Waho |
| Woofer Diamita | 4 Inihi |
| Momo Whakaeke | Taiapa Hurihuri |
| Puna Mana | Hiko Waea (mā ampkaikawe) |
| Kaikorero Te Mana Putanga Morahi | 25 Watts |
| Whakautu auau | 74.98 Hz (te rohe o raro) |
| Aratau Putanga Ororongo | Single Channel (per speaker) |
| Tae | Pango |
| Rahi Hua (tata.) | 30"D x 8"W x 6"H |
| Taumaha Tūemi | 4.79 pauna |
| UPC | 030519999564 |
| Ātete Huarere | Weather-resistant (not waterproof) |
| Pūrere Hototahi | Laptop, MP3 Player, Smartphone, Tablet, Television (via ampkaikawe) |
11. Pūtāhui me te Tautoko
11.1 Nga Korero Whakaputanga
This Speco SP4AWET speaker is covered by a Pūtāhui Ora. For specific terms and conditions of the warranty, please refer to the official Speco Technologies warranty documentation or contact Speco Technologies directly.
11.2 Tautoko Kiritaki
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Speco Technologies customer support. Contact information can typically be found on the official Speco Technologies webte waahi, te kohinga hua ranei.