FERMAX CITY 1L Color Video Door Entry Kit User Manual

1. Kupu Whakataki

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the FERMAX CITY 1L Color Video Door Entry Kit. Please read this manual carefully before attempting to install or operate the device to ensure proper functionality and safety.

The FERMAX CITY 1L Color Video Door Entry Kit is a high-quality and durable intercom system designed to enhance security and communication at your entrance. It features a color video camera for visual identification and a robust design for long-lasting performance.

2. Nga korero haumaru

Always adhere to local electrical codes and regulations during installation. Disconnect power before performing any installation or maintenance procedures. Do not expose the unit to excessive moisture or extreme temperatures. Only use original FERMAX replacement parts.

• Me mohio kua momotuhia te hiko i mua i te whakaurunga.
• Consult a qualified electrician for complex wiring.
• Kaua e whakatuwhera i te taupoki o te waeineasing unless instructed.
• Mawehe atu i te wai me te ra tika.

3. Ihirangi mokete

Manatokohia kei te noho nga waahanga katoa i roto i te kete:

• FERMAX CITY 1L Color Video Door Entry Panel
• Ngā tīwiri me ngā mono whakamau
• Connection Cables (if included in kit)
• Pukapuka Kaiwhakamahi (tenei tuhinga)

Note: Specific components may vary slightly based on the kit version.

4. Whakatakotoranga

5. Tatūnga me te Tāuta

This section outlines the steps for installing the FERMAX CITY 1L Video Door Entry Panel. Professional installation is recommended.

5.1. Te Whakamau i te Papa o Waho

Choose a suitable location near your entrance, ensuring it is protected from direct heavy rain and accessible for visitors. The recommended mounting height for the camera is approximately 1.5 to 1.6 meters from the ground.

1. Mark the drilling points on the wall using the mounting template (if provided).
2. Ka werohia nga rua me te whakauru i nga taputapu pakitara.
3. Pass the necessary cables through the wall opening.
4. Whakamaua te taiapa whakapuru ki te pakitara ma te whakamahi i nga wiri.

5.2. Hononga Waea

Refer to the wiring diagram provided with your specific kit for detailed connection instructions. Ensure all connections are secure and correctly polarized.

General Wiring Steps:

• Tūhonohia te hiko ki ngā kāpeka kua tohua.
• Connect the video signal cable from the outdoor panel to the indoor monitor.
• Connect the audio cables for two-way communication.
• Connect the door release mechanism (if applicable) to the appropriate terminals.

Whakaahua 1: Mua view of the FERMAX CITY 1L Color Video Door Entry Panel. This image displays the main components including the central camera with surrounding illumination, the speaker grille above it, a large illuminated nameplate holder below, and a call button at the very bottom. The panel has a brushed metal finish.

5.3. Huihuinga Whakamutunga

1. Carefully attach the outdoor panel to the mounted bracket, ensuring all cables are tucked away.
2. Secure the panel with the provided screws, typically located at the bottom or sides.
3. Whakahokia te mana ki te punaha.

6. Nga Tohutohu Whakahaere

6.1. Te Waea

To initiate a call from the outdoor panel, the visitor presses the call button. This will activate the indoor monitor and sound an alert.

6.2. Te Whakautu Waea

When a call is received, the indoor monitor will display the visitor's image and ring. To answer, press the talk button on the indoor monitor. You can then communicate with the visitor.

6.3. Te Whakatuwheratanga i te Kūaha

To open the door, press the door release button on the indoor monitor during a conversation or when viewing the outdoor panel's camera feed.

6.4. Monitoring the Entrance

Some indoor monitors allow you to manually activate the outdoor panel's camera to view the entrance area without a call being initiated. Refer to your indoor monitor's manual for this feature.

7. Tiaki

Regular maintenance ensures the longevity and optimal performance of your FERMAX CITY 1L system.

• Te horoi: Whakamahia he ngohengohe, damp cloth to clean the outdoor panel. Avoid abrasive cleaners or solvents that could damage the finish or camera lens.
• Tirotiro: Periodically check cables and connections for any signs of wear or damage. Ensure the panel is securely mounted.
• Arotahi kāmera: Keep the camera lens clean and free from dust or smudges for clear video quality.

8. Te Raru

This section addresses common issues you might encounter with your FERMAX CITY 1L system.

If the problem persists after attempting these solutions, please contact FERMAX customer support or a qualified technician.

9. Pūtāhui me te Tautoko

FERMAX products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official FERMAX website. For technical support, spare parts, or service inquiries, please contact your local FERMAX distributor or customer service center.

Mōhiohio Whakapā:

• Kaihanga: FERMAX
• Webpae: www.fermax.com
• Kaitohu Hua: FER48505
• ASIN: B00WGLLHZS