BFT P125020 BBT Battery Kit for Actuators - Instruction Manual

1. Kupu Whakataki

This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of the BFT P125020 BBT Battery Kit. This kit is designed to provide backup power to compatible BFT gate or door actuators, ensuring continued operation during power outages. Please read this manual thoroughly before proceeding with installation or use. Keep this manual for future reference.

2. Nga korero haumaru

WHAKATŪPATO: Ki te kore e whai i enei tohutohu haumaru ka puta pea te ru hiko, te ahi, te whara kino, te mate ranei.

• Me tāuta e ngā kaimahi whai tohu, kia rite ki ngā ture me ngā whakaritenga hiko ā-rohe.
• Disconnect main power to the actuator before installing or servicing the battery kit.
• Do not expose the battery kit to moisture, rain, or extreme temperatures.
• Ensure proper ventilation around the battery kit.
• Kaua e porotiti-poto nga pito o te pākahiko.
• Dispose of old batteries according to local environmental regulations.
• Use only genuine BFT replacement parts and accessories.

3. Ihirangi mokete

Manatokohia kei te noho katoa nga waahanga me te kore e pakaru i mua i te tiimata o te whakaurunga.

• BFT P125020 BBT Battery Kit (main unit)
• Connection cables (if applicable, check packaging)
• Ko nga taputapu whakauru (mehemea e tika ana, tirohia te kohinga)

Note: Specific contents may vary slightly. Refer to your product packaging for an exact list.

4. Tatūnga me te Tāuta

This section outlines the general steps for installing the BFT P125020 BBT Battery Kit. Always refer to the specific wiring diagrams provided with your BFT actuator control unit for precise connection details.

4.1 Nga Utauta e Hiahia ana

• Nga Kaihurihuri (Phillips me te upoko papatahi)
• Kaipupuri waea / tapahi
• Multimeter (for verification)
• Drill (if mounting)

4.2 Nga Waahi Whakataunga

1. Momotu Hiko: Ensure the main power supply to the BFT actuator control unit is completely disconnected and locked out. Verify with a multimeter.
2. Whakapiki (Kōwhiringa): If the battery kit requires mounting, select a suitable location near the actuator control unit, ensuring it is protected from weather and has adequate ventilation. Secure the kit using appropriate mounting hardware.
3. Hono atu ki te Wāhanga Whakahaere: Locate the dedicated battery connection terminals on your BFT actuator control unit. These are typically labeled for battery input.
4. Hononga Waea: Connect the positive (+) terminal of the battery kit to the positive (+) battery input terminal on the control unit. Connect the negative (-) terminal of the battery kit to the negative (-) battery input terminal on the control unit. Ensure all connections are secure and correctly polarized.
5. Waea Haumaru: Route and secure all wiring to prevent accidental disconnection or damage.
6. Akona Tuatahi: Once connected, restore main power to the actuator control unit. The battery kit will begin charging automatically. Allow sufficient time for the initial charge before relying on battery backup.

Whakaahua 1: BFT P125020 BBT Battery Kit. This image shows the compact design of the battery kit, which provides essential backup power for BFT gate and door actuators.

5. Nga Tohutohu Whakahaere

The BFT P125020 BBT Battery Kit operates automatically once correctly installed and connected to a compatible BFT actuator control unit.

• Whakatau Aunoa: When main power is supplied to the actuator control unit, the battery kit will automatically charge its internal batteries.
• Pūrua Hiko: In the event of a main power failure, the battery kit will seamlessly provide power to the actuator, allowing for continued operation for a limited number of cycles, depending on the battery charge level and actuator usage.
• Tohu Pūhiko Iti: Some BFT control units may provide an indication of low battery status. Refer to your actuator's control unit manual for specific details.

6. Tiaki

Regular maintenance helps ensure the longevity and reliable operation of your BFT P125020 BBT Battery Kit.

• Tirotiro Ataata: Periodically inspect the battery kit and its connections for any signs of damage, corrosion, or loose wiring.
• Te horoi: Keep the battery kit clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use abrasive cleaners or solvents.
• Whakakapinga Pūhiko: Batteries have a limited lifespan. If the battery kit no longer provides adequate backup power, the internal batteries may need replacement. Contact BFT support or a qualified technician for battery replacement.
• Nga Tikanga Taiao: Ensure the battery kit remains within its specified operating temperature range and is protected from direct sunlight and moisture.

7. Te Raru

If you experience issues with your BFT P125020 BBT Battery Kit, refer to the following common problems and solutions.

For issues not covered here, or if troubleshooting steps do not resolve the problem, contact BFT technical support.

8. Whakatakotoranga

Panui: Ka panoni nga whakaritenga ka kore he panui.

9. Nga Korero Whakaputanga

BFT products are covered by a manufacturer's warranty against defects in materials and workmanship. The duration and terms of the warranty may vary by region and product. Please retain your proof of purchase. For detailed warranty information, refer to the official BFT website or contact your local BFT distributor.

This warranty does not cover damage caused by improper installation, misuse, neglect, unauthorized repairs, or acts of nature.

10. Tautoko

For technical assistance, spare parts, or further information regarding the BFT P125020 BBT Battery Kit, please contact BFT customer support or your authorized BFT dealer.

• BFT Official Webpae: www.bft-automation.com
• Kaituku Paetata: Refer to the BFT website for a list of authorized distributors in your area.

When contacting support, please have your product model number (P125020) and proof of purchase readily available.