HyperX Savage DDR4 Memory Module User Manual

Kupu Whakataki

This manual provides essential information for the installation, operation, and maintenance of your HyperX Savage DDR4 memory modules. The HyperX Savage DDR4 memory is designed to complement Intel's 2, 4, 6, or 8 core processors, offering enhanced performance for tasks such as video editing, 3D rendering, gaming, and AI processing. These modules feature speeds up to 3000MHz and latencies of CL15, optimized for Intel's 100 series chipset and X99 chipset motherboards, supporting easy overclocking via XMP profiles.

Whakaahua: Mua view of the HyperX Savage DDR4 memory module, showcasing its black heat spreader with the HyperX logo and Savage DDR4 branding.

Ihirangi mokete

Manatokohia kei roto i to kete nga mea e whai ake nei:

• 2 x HyperX Savage DDR4 Memory Modules (8GB each, 16GB Kit)

Tatūnga me te Tāuta

Before installing the memory modules, ensure your system is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

1. Whakaritenga

1. Taki Hototahi: Confirm that your motherboard supports DDR4 DIMM memory modules and the specified speed (3000MHz). Refer to your motherboard's manual for details.
2. Weto Whakakore: Whakawetohia rawatia tō rorohiko, ka momotu i te taura hiko.
3. Puhi Tuwhera: Open your computer's side panel to access the motherboard.

2. Tāuta Kōwae

1. Kimihia nga mokamoka DIMM: Tāutuhia ngā mokamoka DDR4 DIMM i runga i tō papahoahoa. Tirohia te pukapuka ā-ringa mō tō papahoahoa mō te whirihoranga mokamoka tika mō te mahara rua-hongere.
2. Ngā Topenga Tuwhera: Gently push down the retention clips at both ends of the DIMM slot.
3. Whakaritea te Kōwae: Hold the memory module by its edges, avoiding contact with the gold pins. Align the notch on the module with the key in the DIMM slot.
4. Kōkuhu Kōwae: Apply even pressure to both ends of the module until it seats firmly into the slot and the retention clips snap into place. Do not force the module.
5. Tukurua: Install the second memory module into the corresponding slot as indicated by your motherboard manual.

Whakaahua: Koki view of the HyperX Savage DDR4 memory module, showing the heat spreader design and the gold contact pins.

3. I muri i te whakaurunga

1. Katihia te Take: Reattach the side panel of your computer case.
2. Honoa Anō te Mana: Plug the power cable back into your computer and power it on.

Nga Tohutohu Whakahaere

After physical installation, it is important to configure your system's BIOS/UEFI to utilize the full potential of your HyperX Savage DDR4 memory modules.

Te whakahohe i te XMP Profile

HyperX Savage DDR4 memory modules come with built-in Intel XMP (Extreme Memory Profile) profiles. Ko enei profiles are optimized for Intel 100 series chipsets and X99 motherboards, allowing for easy overclocking without manual timing adjustments.

1. Uru ki te BIOS/UEFI: I te wa o te whakaoho o te punaha, pehi tonu i te taviri kua tohua (te nuinga DEL, F2, F10, ranei F12) to enter your motherboard's BIOS or UEFI settings. The specific key varies by motherboard manufacturer.
2. Kimihia te Tautuhinga XMP: Navigate to the memory or overclocking section within the BIOS/UEFI. Look for an option related to 'XMP', 'DOCP', 'A-XMP', or 'Memory Profile'.
3. Whakahohe Profile: Select the XMP profile (usually 'Profile 1' or 'Enabled') to automatically configure the memory to its rated speed (3000MHz) and timings (CL15) at 1.35V.
4. Tiaki ka Putaatu: Tiakina nga huringa ka puta atu i te BIOS/UEFI. Ka timata ano to punaha me nga tautuhinga mahara hou kua tukuna.

If your system does not support XMP, the memory will operate at a default JEDEC speed, typically 2133MHz or 2400MHz, depending on your motherboard and CPU.

Te tiaki

HyperX Savage DDR4 memory modules are designed for durability and reliability. Minimal maintenance is required to ensure optimal performance and longevity.

• Pupuri Ma: Periodically clean the interior of your computer case to prevent dust buildup on the memory modules and other components. Use compressed air to gently remove dust.
• Whakahaere Tika: When handling memory modules, always hold them by the edges to avoid touching the gold contacts or the integrated circuits.
• Mana Pawera: Ensure adequate airflow within your computer case to maintain optimal operating temperatures for all components, including memory.

Raparongoā

If you encounter issues after installing your HyperX Savage DDR4 memory, consider the following troubleshooting steps:

• Kāore te Pūnaha e Whakaara:
  • Ensure the memory modules are fully seated in their slots and the retention clips are locked.
  • Verify that your motherboard supports the installed memory type and speed.
  • Try booting with only one module installed to identify a potentially faulty module.
• Incorrect Speed Detected:
  • Access your BIOS/UEFI settings and ensure the XMP profile kua whakahohea.
  • Update your motherboard's BIOS/UEFI to the latest version, as this can improve memory compatibility and stability.
• Te Pūmaukore o te Pūnaha, te Tukinga rānei:
  • Whakahaerehia he taputapu tātari mahara (hei tauira, Windows Memory Diagnostic, MemTest86 ranei) hei tirotiro mo nga hapa.
  • Me mohio kei te whakaratohia e to waeine hiko (PSU) te mana tika me te pumau ki nga waahanga katoa.
  • Check for proper cooling within your system to prevent overheating.

Whakatakotoranga

Pūtāhui me te Tautoko

HyperX Savage DDR4 memory modules are backed by a lifetime warranty, ensuring long-term reliability and peace of mind. Free technical support is also available to assist with any questions or issues you may encounter.

For warranty claims or technical assistance, please visit the official HyperX support webpaetukutuku, whakapā atu ranei ki ta raatau ratonga kaihoko. Puritia to tohu hoko mo te whakamana whakamana.

Tautoko HyperX: www.hyperx.com/support