1. Hua Neke Atuview
The Beam Electronics DGC2020 Car Phone Holder Mount is designed to securely hold your smartphone in your vehicle. It features a quick-release button for easy phone removal and a 360-degree rotating head for optimal viewing angles. This mount is compatible with a wide range of smartphones and electronic devices.
Āhuatanga matua:
- Patene Tuku Tere: Press the button on the back to open the arms and retrieve your mobile phone. Press the arms together to clamp the phone securely.
- Hurihuri 360 Waeine: The fully 360-degree rotation provides the best viewing angle for navigation, calls, or music.
- Hototahi whanui: Fits most cellphones and electronic devices with a width from 1.9 inches to 3.7 inches.
- Single-handed Operation: Designed for simple installation and removal of smartphones with no tools required.
Image 1.1: The Beam Electronics Car Phone Holder Mount securely installed in a vehicle's air vent, displaying a smartphone.
2. Tatūnga me te Tāuta
Follow these steps to properly install your car phone holder mount:
- Identify Compatible Air Vent: The mount is designed for horizontal or vertical air vents. Ensure your vehicle's vent type is compatible.
- Whakapirihia te Maunga: Locate the clip mechanism on the back of the phone holder. Push the clip firmly onto one of the air vent blades.
- Tiakina te Topenga: On the back of the clip, there is a lever or knob to tighten the grip. Adjust it to ensure the mount is securely fastened to the vent and does not wobble.
Whakaahua 2.1: Pahū view highlighting key components: adjustable side-grip arms, 360-degree rotatable pivot, quick-release button, and the cushioned air vent clip.
Image 2.2: Visual guide for compatible and incompatible car air vent designs for secure mounting.
Video 2.1: Demonstrates installation tips for the car phone holder mount in various car models, showing how to attach it to the air vent and adjust for optimal positioning.
3. Nga Tohutohu Whakahaere
Te Whakauru i tō Waea:
- Gently pull open the adjustable side-grip support arms of the holder.
- Place your smartphone into the holder, ensuring it rests on the bottom support feet.
- Press the adjustable arms inward until they securely grip your phone. The arms will lock into place, holding your device firmly.
Te tango i to Waea:
- Locate the quick-release button on the back of the holder (refer to Image 2.1).
- Press the quick-release button. The side-grip arms will automatically slide open.
- Carefully remove your smartphone from the holder.
Image 3.1: A finger demonstrating the quick-release button on the back of the mount, which expands the arms for phone removal.
Te whakatikatika i te Viewing Koki:
The phone holder features a 360-degree rotatable pivot. Simply rotate the phone holder to achieve your desired vertical or horizontal viewing angle. Ensure the angle is adjusted before driving to avoid distraction.
Video 3.1: Shows the phone holder's adjustable side grips and 360-degree rotation, demonstrating how it securely holds various phone sizes and allows for flexible viewnga koki.
Video 3.2: Illustrates the ease of use for the Beam Electronics car phone holder, including phone insertion, removal, and rotation, highlighting its sturdy grip.
4. Tiaki me te Tiaki
- Te horoi: Horoia te pupuri ki te ngohengohe, damp kakahu hei tango i te puehu me ngā paru. Kaua e whakamahi i ngā matū kaha, i ngā kaihoroi whakakoi rānei.
- Tirotiro: Periodically check the air vent clip and phone gripping arms for any signs of wear or damage. Ensure all moving parts operate smoothly.
- Te pāmahana: While the product is designed to be heat and cold resistant, extreme temperatures can affect its longevity. Avoid prolonged exposure to direct sunlight or extreme cold when not in use.
5. Te Raru
- Mount feels loose on the vent: Ensure the tightening lever/knob on the back of the clip is fully engaged and tightened. Re-adjust if necessary.
- Karekau te waea e mau ana: Make sure the side-grip arms are fully closed around your phone. The holder is compatible with devices between 1.9 and 3.7 inches in width.
- Difficulty with quick-release button: Ensure the button is pressed firmly and completely. If it still sticks, check for any obstructions or debris.
6. Whakatakotoranga Hua
| Āhuahira | Whakatakotoranga |
|---|---|
| Hunga Hua | 2.72 x 3.39 x 5.51 inihi |
| Taumaha Tūemi | 0.071 hekere |
| Tauira Tuemi | DGC2020 |
| Nga waahanga motuhake | Adjustable, Cold Resistant, Heat Resistant, Rotatable |
| Tae | Kerei, Pango |
| Pūrere Hototahi | Waea atamai |
| Tauira Waea Hototahi | iPhone 12, 11 Pro Max, XS, XR, X, 8+, 7+, SE, 6s, 6+, 5s, 4; Samsung Galaxy S6, HTC, LG, Nexus, Nokia (width 1.9 to 3.7 inches) |
| Momo Whakaeke | Putanga |
7. Pūtāhui me te Tautoko
This Beam Electronics Car Phone Holder Mount comes with a 1-tau pūtāhui mai i te ra o te hokonga. Ka kapi tenei raihana i nga hapa o te hanga me te whakarite kia pai te mahi o nga hua i raro i te whakamahinga noa.
For warranty claims, technical support, or any inquiries regarding your product, please contact Beam Electronics customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number (DGC2020) ready when contacting support.