OttLite Restore LED Desk Lamp with 2.1A USB Port

1. Tatūnga

Carefully remove all components from the packaging. Ensure all parts are present before proceeding with assembly and setup.

1.1 Huihuinga

1. Whakanohoia te lamp te turanga i runga i te mata papatahi.
2. Whakauruhia te lamp pole into the base and secure it by turning the knob clockwise until firm.
3. Whakapirihia te lamp head to the top of the pole and tighten the adjustment knob to hold it in place.

1.2 Hononga Hiko

Plug the power cable into the port at the back of the lamp base, then connect the other end to a standard 120V electrical outlet.

Figure 1: Fully assembled OttLite Restore LED Desk Lamp with a phone charging via the integrated USB port.

2. Nga Tohutohu Whakahaere

2.1 Te Whakakā/Te Whakaweto me te Whakaritenga o te Kanapa

Kei teamp features a touch-sensitive switch located on the base. Tap the switch to cycle through the three brightness levels and to turn the lamp atu.

• Pa tuatahi: Low Brightness (approx. 160 lumens)
• Pa Tuarua: Medium Brightness (approx. 320 lumens)
• Pa Tuatoru: High Brightness (approx. 485 lumens)
• Pa Tuwha: Wehe

Kei teamp includes a memory feature that remembers your last brightness setting when turned off and on again.

Figure 2: Location of the touch-sensitive power switch on the lamp turanga.

2.2 Te Tohu Paemahana Tae

Ko tenei lamp offers three distinct color temperature modes to suit various tasks and preferences. To change the color temperature, press and hold the touch-sensitive switch for 2-3 seconds. The lamp will cycle through the following modes:

• ClearSun Natural Daylight (5000K): Provides balanced, natural light ideal for reading, crafting, and tasks requiring high color accuracy.
• Bright White (4000K): A cooler white light suitable for general illumination and focused work.
• Ma whakamahana (2700K): A softer, warmer light for relaxation or ambient lighting.

Whakaahua 3: Ko te lamp's three adjustable color temperature settings.

2.3 USB Whakahaerehia te Tauranga

Kei teamp is equipped with a 5V, 2.1A USB port located on the base. This port allows you to charge compatible devices such as smartphones, smartwatches, and tablets. Simply connect your device's USB charging cable to the port.

Figure 4: Integrated 5V, 2.1A USB charging port on the lamp turanga.

2.4 Adjusting Lamp Turanga

The OttLite Restore lamp features an articulating neck and pivoting shade for optimal light positioning. You can adjust the height of the lamp from 9 inches to 22 inches. Loosen the adjustment knobs on the pole and near the lamp head to reposition, then tighten them to secure the desired angle and height.

Figure 5: Articulating neck and pivoting shade for flexible light direction.

Whakaahua 6: Ko te lamp's adjustable height feature, ranging from 9 to 22 inches.

2.5 ClearSun LED Technology Overview

The OttLite Restore LED Desk Lamp utilizes proprietary ClearSun LED technology. This technology is designed to closely match the spectral output of natural sunlight, providing balanced and smooth lighting across the entire visual spectrum. This helps to reduce eyestrain by up to 51% and enhances color rendering, making colors appear more vivid and true-to-life (CRI of 97).

3. Tiaki

3.1 Te horoi

Hei horoi i te lamp, ensure it is unplugged from the power outlet. Use a soft, dry cloth to wipe down the surfaces. Do not use abrasive cleaners, solvents, or polishes as these may damage the finish or electrical components.

3.2 Te Roa o te Ora o te LED

The integrated LEDs in this lamp are rated to last up to 40,000 hours under normal use. The LEDs are not user-replaceable. If the light source fails, the entire lamp me whakakapi pea te waeine.

4. Te Raru

• Lamp kāore e kā ana:
  • Check if the power cable is securely plugged into both the lamp me te putanga hiko.
  • Manatokohia kei te mahi te putanga hiko ma te hono ki tetahi atu taputapu.
  • Ensure the touch-sensitive switch is being pressed correctly.
• Kāore te tauranga utu USB e mahi ana:
  • Whakapumautia te lamp kua whakahikohia, kua honoa ki te putanga hiko ora.
  • Try a different USB cable or device to rule out issues with the cable or device.
• Ka pīataata te mārama, ka kore rānei e ōrite:
  • Ensure the power connection is stable and there are no loose connections.
  • A ape i te whakamahi i te lamp with dimmer switches not specifically designed for LED lighting, as this can cause flickering.

5. Whakatakotoranga

6. Nga Korero Whakaputanga

This OttLite Restore LED Desk Lamp kua hipokina e a 3-tau iti pūtāhui. For specific terms and conditions, please refer to the warranty card included with your product or visit the official OttLite webpae.

7. Tautoko

For further assistance, technical support, or to inquire about replacement parts, please contact OttLite Customer Service. Contact details can typically be found on the OttLite webte waahi kei runga ranei i te kohinga hua.

Tena koa pupurihia tenei pukapuka hei tohutoro a meake nei.