1. Kupu Whakataki
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Alpine S-A60M Mono Car Audio Amplifier. The S-A60M is a Class-D amplifier designed to deliver reliable power for your car audio subwoofer system. For optimal performance and safety, please read this manual thoroughly before installation and use.
Image 1.1: Alpine S-A60M Mono Car Audio Amplifier with optional RUX-KNOB.2 remote bass control knob and wiring accessories.
2. Nga korero haumaru
Kia mau ki nga whakaritenga haumaru e whai ake nei hei aukati i te whara, i te kino ranei o te ampwaka, waka rānei:
- Momotuhia te pūhiko kino o te waka i mua i te tīmatanga o tētahi tāutanga.
- Me whakarite kia tika te hononga whenua ki te anga o te waka.
- Whakamahia ngā waea ine tika mō ngā hononga hiko me te whenua e ai ki te wāhanga tāutanga.
- Protect all wiring from sharp edges and pinch points.
- Kaua e whakairihia te ampHe whakaahuru i nga waahi e pa ana ki te ra tika, te wera nui, te makuku, te puehu ranei.
- Whakanuia te amplifier to prevent it from coming loose during sudden stops or impacts.
- A ape i te whakahaere i te amplifier at excessively high volume levels for prolonged periods, which can damage hearing or speakers.
- Mena kaore koe i te tino mohio mo tetahi waahanga o te tukanga whakauru, korero ki tetahi tohunga ngaio.
3. Tatūnga me te Tāuta
He mea nui te whakaurunga tika mo te mahi me te roa o to oranga ampwhakarara. A pee i enei taahiraa.
3.1 Waea Whakawhiwhi Hiko
Refer to the diagram below for correct power supply connections. Always use the specified wire gauges and ensure all connections are secure.
Image 3.1: Power Supply Wiring Diagram. This diagram illustrates the correct method for connecting the amplifier to the vehicle's power system, including the battery, fuse, and ground connections. Ensure the fuse capacity matches the ampngā whakaritenga a te kaiwhakaora.
Hiranga: The total fuse capacity of the amplifier must be installed and the specified wire length. For detailed information, refer to the "Power Supply" section in the owner's manual. Always connect the power wire directly to the positive battery terminal and the ground wire to a clean, unpainted metal surface on the vehicle chassis.
- Battery (BATT): Connect to the positive (+) terminal of the vehicle battery via an appropriate fuse.
- Mamao (REM): Hono atu ki te putanga tahuri-mamao o tō waeine matua.
- Papa (GND): Connect to a clean, unpainted metal part of the vehicle chassis.
- Speaker Output (SPK OUT): Connect to your subwoofer(s).
Whakaahua 3.2: Amplifier Power and Speaker Output Terminals. This image displays the terminals for power input (BATT, REM, GND) and speaker output (SPK OUT) on the Alpine S-A60M amplifier, along with the integrated fuses.
3.2 Hononga Whakauru Ororongo
The S-A60M supports both low-level (RCA) and high-level (speaker wire) inputs.
- Tāuru Taumata-iti (RCA): Honoa ngā taura RCA mai i te subwoofer o tō pane, i ngā taura pre-out whānui rānei ki te amplifier's INPUT (L/R) terminals.
- Tāuru Taumata-Teitei: If your head unit does not have RCA outputs, connect speaker wires from your head unit's speaker outputs directly to the amplifier's high-level input terminals (if available, or use a line output converter).
Whakaahua 3.3: Amplifier Input and Control Panel. This image highlights the various input and control settings on the Alpine S-A60M, including the input level switch, gain control, low-pass filter, bass equalizer, and the port for the optional remote bass control.
4. Te whakahaere i te Ampkaikawe
Kia whakauruhia, whakatikahia te ampnga tautuhinga riipene mo te mahi oro tino pai.
4.1 Te Whakatikatika Taumata Whakauru
- Whakaritea te KOREUTU TUPONO switch to "LO" for low-level (RCA) inputs or "HI" for high-level inputs.
- Whakaritea te KAUPAPA control to match the output of your head unit. Start with the gain at minimum, play a familiar track, and slowly increase the gain until distortion is heard, then back off slightly.
4.2 LP Filter (Low-Pass Filter)
The LP Filter allows only frequencies below the set point to pass through to the subwoofer. This is essential for proper subwoofer integration.
- Whakaritea te LP FILTER knob to set the desired crossover frequency (e.g., 80Hz-120Hz is common for subwoofers).
4.3 Pūoro Pāoro
The Bass EQ provides a boost to specific bass frequencies.
- Whakaritea te BASS EQ knob to increase or decrease bass output. Use sparingly to avoid distortion and speaker damage.
4.4 Remote Bass Control (Optional RUX-KNOB.2)
If you have the optional Alpine RUX-KNOB.2 remote bass control, connect it to the REMOTE BASS CONTROL tauranga i runga i te amplifier. This allows for convenient, on-the-fly adjustment of subwoofer output from the driver's seat.
5. Tiaki
Ko te tiaki i nga wa katoa ka mau te roa me te tino pai o to mahi ampkaikawe
- Te horoi: Ia wā horoia te amphe kakahu ngohengohe, maroke te taha o waho. A ape i te whakamahi i nga matū kino, i nga horoi horoi ranei.
- Hononga: Annually check all power, ground, and speaker connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
- Whakahau: Me whakarite te ampKo nga tara whakamatao o lifier he kore e aukati kia pai ai te tohanga wera.
6. Te Raru
Mena ka pa ki a koe nga raru o to ampmō te āwhina ngaio, tirohia te ripanga e whai ake nei i mua i te rapu āwhina ngaio.
| Tohutohu | Take pea | Rongoā |
|---|---|---|
| Karekau he kaha/Karekau he tangi | Blown fuse, loose power/ground connection, remote wire not connected, ampkaiwhakarewa i roto i te aratau tiaki. | Tirohia ngā fiusi (kei runga amplifier and in power line), verify all power and ground connections, ensure remote wire is connected to head unit's remote output, check for overheating or short circuits. |
| Oro kerekere | Gain set too high, improper input level switch setting, damaged speaker, poor signal source. | Reduce gain, ensure INPUT LEVEL switch matches input type (LO/HI), check speaker wiring and condition, test with a different audio source. |
| No bass output | LP Filter set too high/low, Bass EQ set too low, subwoofer wiring issue. | Adjust LP Filter to appropriate frequency, increase Bass EQ if desired (with caution), verify subwoofer connections and impedance. |
| Ampka wera rawa te rama | Insufficient ventilation, improper impedance load, gain set too high. | Me whakarite kia pai te rere o te hau huri noa i te ampkaiwhakaora, manatokohia ngā taurite ārai o te kaikorero amplifier's capabilities, reduce gain setting. |
7. Whakatakotoranga
Detailed technical specifications for the Alpine S-A60M ampkaikawe
- Tau tauira: S-A60M
- CTA-2006-B Power Rating:
- 330W RMS x 1 (4ohm, 14.4V, 1% THD+N)
- 600W RMS x 1 (2ohm, 14.4V, 1% THD+N)
- Ōwehenga Tohu-ki-Haruru (S/N): >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm)
- Tapeke Harmonic Distortion + Haruru (THD+N): 0.03% (ref 1W into 4 ohm)
- Whakautu Auautanga: 10Hz-400Hz (+/-3 dB)
- Damping Take: >1000
- Voltage: 14.4 Volts (DC)
- Tukunga Mōrahi Voltage: 14.4 Volts (DC)
- Voltage: 14.4 Volts (DC)
- Momo Whakapuru: Maunga Mata
- Ahu mōkihi: 10.2 x 9.7 x 3.8 inihi
- Taumaha: 6.8 Pauna
- Remote Bass Knob Compatible: Yes (requires RUX-KNOB.2, sold separately)
8. Pūtāhui me te Tautoko
Alpine products are designed and manufactured to the highest quality standards. For specific warranty information regarding your S-A60M amplifier, please refer to the warranty card included with your product or visit the official Alpine webpae.
For technical support, service inquiries, or to locate an authorized Alpine dealer, please visit the official Alpine webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko. Puritia to riirii hoko hei tohu mo te hoko mo nga kereme whakamana.
Alpine Electronics of America, Inc.
www.alpine-usa.com