Kupu Whakataki
This manual provides instructions for the installation, operation, and maintenance of the Pelco P2230L-ESR 2MP IR WDR Full HD Environmental PTZ Network Outdoor Dome Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
Nga korero haumaru
Nga Tohutohu Haumaru Nui
- Me ata panui enei tohutohu.
- Puritia enei tohutohu hei tohutoro a meake nei.
- Heed all warnings provided with the product and in this manual.
- Whaia nga tohutohu whakaurunga me nga mahi katoa.
- Kaua e whakamahia tenei taputapu ki te taha o te wai, ki nga waahi makuku rawa ranei.
- Horoia ki te kakahu maroke anake.
- Install the camera in accordance with the manufacturer's instructions and local electrical codes.
- Tukuna nga ratonga katoa ki nga kaimahi ratonga whai tohu. Kaua e ngana ki te mahi koe i tenei hua.
Ihirangi mokete
He aha kei roto
Verify that all items listed below are present in your package. If any items are missing or damaged, contact your supplier immediately.
- Pelco P2230L-ESR PTZ Network Camera
- Ko nga taputapu whakamau (tuuuri, punga)
- Tātauira tāutanga
- Aratohu Timata Tere
Ka mutu te huaview
Wae Kāmera
The Pelco P2230L-ESR is a high-performance PTZ (Pan-Tilt-Zoom) network camera designed for environmental surveillance. It features a 2-megapixel sensor, infrared (IR) illumination, Wide Dynamic Range (WDR), and full HD resolution for clear imaging in various conditions.
This image displays the Pelco P2230L-ESR PTZ Network Camera, showing its dome-shaped lower section containing the lens and the cylindrical upper housing.
Nga waahanga matua
- Pūoko: Pūoko CMOS 1/3-inihi
- Whakatau: 1920 x 1080 (Katoa HD 1080p)
- Arotahi: 4.3 mm ~ 129 mm varifocal Lens
- Topa whatu: 30x
- Whakamārama IR: 850 nm, up to 150 m range
- Whakahohe Ataata: H.265, H.264, and MJPEG
- Rangi Taputapu: +15° to –90°
- Mahinga Maama Iti: Down to 0.3 lux
- Awhe Hiringa Whānui (WDR): 100 dB
- Rapunga: Hapatage and Simple Motion Detection
- Whakatauranga Taiao: IP66 weatherproof for outdoor use
Tatūnga
Aratohu Tāuta
The camera is designed for wall mount installation. Ensure the mounting surface is strong enough to support the camera's weight and withstand environmental conditions. Proper installation is crucial for optimal performance and longevity.
This diagram illustrates the detailed dimensions of the Pelco P2230L-ESR camera in various views (front, side, top, bottom), providing measurements in both inches and centimeters for precise installation planning.
Waea me nga Hononga
- Hononga Hiko: Connect the camera to a suitable power source as specified in the technical specifications. Ensure the power supply meets the camera's requirements.
- Hononga Whatunga: Connect an Ethernet cable from the camera's network port to your network switch or router. This provides both data and potentially Power over Ethernet (PoE) if supported by your switch.
- Optional I/O Connections: If applicable, connect external alarm inputs/outputs or audio devices according to the camera's interface and your system requirements. Refer to the detailed wiring diagram in the full product manual for specific pinouts.
This image shows a standard blue Ethernet cable with RJ45 connectors, used for establishing a wired network connection to the camera.
Whirihoranga Whatunga Tuatahi
I muri i te tāutanga ā-tinana, uru atu ki te kāmera web interface using its default IP address or by using a Pelco discovery tool. Follow the on-screen prompts to set up network parameters, create secure user accounts, and configure initial camera settings such as time zone and date.
Te whakahaere
Te Mahi Whakaata
Te uru atu ki te Web Atanga
Tuwhera a web browser (e.g., Chrome, Firefox) and enter the camera's IP address in the address bar. Log in using your configured username and password. The web ka whakaratohia e te atanga te urunga ki te ora view, recording settings, motion detection, and PTZ controls.
Pan-Tilt-Zoom (PTZ) Control
Use the PTZ controls within the camera's web interface or a compatible VMS (Video Management System) to adjust the camera's pan, tilt, and zoom functions.
- Paraoa: Rotates the camera horizontally to cover a wider area.
- Tapahia: Adjusts the camera's vertical angle to look up or down.
- Topa: Magnifies or de-magnifies the view. The camera features a powerful 30x optical zoom for detailed observation.
Te tuhi me te rokiroki
Configure recording schedules, motion-triggered recording, and continuous recording options. Set up storage destinations such as Network Attached Storage (NAS) or a local SD card (if supported by the specific camera model) for video archives.
Te Motini
Set up motion detection zones and sensitivity levels to trigger alarms, recordings, or notifications when movement is detected within the defined surveillance area. This feature helps in efficient monitoring and storage management.
Te tiaki
Tiaki me te Tiaki
Te horoi
Regularly clean the camera's lens and housing with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals that could damage the optical surfaces or the camera's finish. For stubborn dirt, use a mild soap solution.
Ngā Whakahōu Firmware
Periodically check the official Pelco website for firmware updates. Keeping the camera's firmware up-to-date ensures optimal performance, enhances security features, and provides access to new functionalities. Follow the instructions provided with the firmware update package carefully.
Nga Whakaaro Taiao
Ensure the camera's seals and connections remain intact to maintain its IP66 weatherproof rating, especially after any maintenance or installation adjustments. Inspect for any signs of wear or damage that could compromise its environmental protection.
Raparongoā
Nga take me nga otinga noa
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Karekau he kai ataata | Power issue, network cable disconnected, incorrect IP address, camera malfunction | Check power supply, verify network cable connection, confirm IP address and network settings. Restart the camera. |
| Te kounga whakaahua kounga | Dirty lens, improper focus, low light conditions, network bandwidth limitations | Clean the lens, adjust focus via the web interface, ensure adequate lighting, check network bandwidth and camera settings. |
| Kāore ngā mana whakahaere PTZ e aro mai | Network connectivity issues, software glitch, camera malfunction, incorrect user permissions | Verify network connection, restart the camera, update firmware, check user permissions in the web atanga. |
| Kaore i te mahi te kitenga nekehanga | Incorrect sensitivity settings, detection zones not configured, event actions not set | Adjust motion detection sensitivity and ensure zones are properly defined in the web interface. Verify event actions are configured. |
| Kaore e taea te uru web atanga | Incorrect IP address, firewall blocking, network issue, browser compatibility | Confirm camera's IP address, check local network settings and firewall rules. Try a different web pūtirotiro. |
| IR illumination not working | IR sensor blocked, setting disabled, hardware fault, insufficient power | Ensure IR sensor is clear, check IR settings in the web interface, verify power supply. Contact support if issue persists. |
Whakatakotoranga
Whakatakotoranga Hangarau
- Tauira: P2230L-ESR
- Pūoko: Pūoko CMOS 1/3-inihi
- Whakatau: 1920 x 1080 (Katoa HD 1080p)
- Arotahi: 4.3 mm ~ 129 mm varifocal Lens
- Topa whatu: 30x
- Awhe IR: Up to 150 m (850 nm IR Illumination)
- Whakahohe Ataata: H.265, H.264, MJPEG
- Rangi Taputapu: +15° to –90°
- Maama iti: Down to 0.3 lux
- Awhe Hiringa Whānui (WDR): 100 dB
- Auau Tāpare: Up to 60 Images per Second (ips)
- Rapunga: Hapatage and Simple Motion Detection
- Whakatauranga Parenga o te Ao: IP66 (Taurangi)
- Momo Whakapuru: Maunga Taiepa
- Hononga: Wi-Fi (Hangarau Whakawhitiwhiti Waeakore)
- UPC: 700880346648
Pūtāhui me te Tautoko
Product Warranty and Customer Support
For detailed warranty information, please refer to the official Pelco website or the warranty card included with your product package. Warranty terms and conditions may vary by region and purchase date.
For technical assistance, troubleshooting, or further inquiries regarding your Pelco P2230L-ESR camera, please contact Pelco customer support. Their team can provide expert guidance and resolve any issues you may encounter.
You can find contact information and additional resources, including comprehensive product documentation and FAQs, on the official Pelco webpae: www.whita.com