Axis M7104 Video Encoder User Manual

1. Kupu Whakataki

The Axis M7104 Video Encoder is designed to integrate analog CCTV cameras into an IP-based video surveillance system. This device digitizes analog video signals, allowing them to be viewed, recorded, and managed over a network. It supports various video surveillance and security system applications, providing a bridge between traditional analog infrastructure and modern IP network capabilities.

Whakaahua 1: Axis M7104 Video Encoder. This image shows the front of the video encoder, highlighting its compact design and various input/output ports for connecting analog cameras and network cables.

2. Nga korero haumaru

• Whakamahi Roto anake: This device is designed for indoor use. Do not expose it to outdoor elements, moisture, or extreme temperatures.
• Tuku Hiko: Use only the power adapter supplied with the device or a compatible power supply specified by Axis Communications.
• Whakahau: Me whakarite kia tika te hau huri noa i te taputapu kia kore ai e wera rawa. Kaua e araia nga whakatuwheratanga hau.
• Whakapiki: Mount the device securely on a stable surface or rack.
• Te horoi: Disconnect power before cleaning. Use a dry, soft cloth. Do not use liquid or aerosol cleaners.
• Ratonga: Kaua e tarai ki te mahi i tenei hua maau ake. Tirohia nga ratonga katoa ki nga kaimahi tohu tohu.

3. Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i te kete:

• Axis M7104 Video Encoder Unit
• Pūurutau Hiko
• He Aratohu / Tuhituhi
• Mounting Bracket (if applicable)

4. Tatūnga

4.1 Hononga Tinana

1. Connect Analog Cameras: Connect your analog CCTV cameras to the video input ports on the Axis M7104 using coaxial cables. The encoder typically features multiple BNC connectors for this purpose.
2. Hono atu ki te Whatunga: Connect an Ethernet cable (Cat 6 recommended) from the RJ45 network port on the encoder to your network switch or router. Ensure the network connection is active.
3. Hono Hono: Plug the power adapter into the encoder's power input and then into a suitable power outlet. The device will power on automatically.

4.2 Whirihoranga Tuatahi

After connecting the hardware, you will need to configure the encoder via its web atanga:

• Tirohia te Pūrere: Use the Axis IP Utility or Axis Device Manager software to discover the encoder on your network and obtain its IP address.
• Urunga Web Atanga: Tuwhera a web browser and enter the encoder's IP address. You will be prompted to set a root password for the device.
• Configure Video Streams: I roto i te web interface, configure video settings for each connected camera, including resolution, frame rate (e.g., 30 Hz), compression, and streaming profiles.
• Tautuhinga Whatunga: Adjust network settings such as static IP address, DNS, and gateway if required by your network infrastructure.

5. Operating the Video Encoder

Once configured, the Axis M7104 Video Encoder operates by continuously digitizing and streaming video from connected analog cameras over the network. It is primarily used for video surveillance and security systems.

• Ora View: Access live video streams from connected cameras through a compatible Video Management Software (VMS) or directly via the encoder's web atanga.
• Te tuhi: Integrate the encoder with a Network Video Recorder (NVR) or VMS for continuous or event-triggered recording of video streams.
• Whakahaere Kaupapa: Configure event triggers (e.g., motion detection, external input) and corresponding actions (e.g., send notifications, start recording) through the encoder's web atanga, VMS rānei.
• Uru Mamao: Access video streams and manage the encoder remotely via a secure network connection, often facilitated by your VMS or network configuration.

6. Tiaki

• Te horoi: Periodically clean the exterior of the encoder with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off before cleaning.
• Whakahōu Firmware: Tirohia auautia te Axis Communications website for firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features. Follow the instructions provided by Axis for firmware update procedures.
• Nga Tikanga Taiao: Ensure the operating environment remains within the specified temperature and humidity ranges for indoor use to prevent damage and ensure longevity.

7. Te Raru

Nga take me nga otinga noa:

• Kore Mana:
  • Verify the power adapter is securely connected to both the encoder and a working power outlet.
  • Tirohia mehemea kei te mahi te putanga hiko.
• Kore Hononga Whatunga:
  • Ensure the Ethernet cable is properly connected to the RJ45 port on the encoder and the network switch/router.
  • Check the network status lights on the encoder and the switch.
  • Verify network settings (IP address, subnet mask, gateway) are correct.
  • Try restarting the encoder and the network switch.
• Kore he Tohu Ataata:
  • Confirm that analog cameras are properly connected to the coaxial video input ports.
  • Ensure cameras are powered on and functioning correctly.
  • Check video settings in the encoder's web interface for the specific channel.
• Kaore e taea te uru Web Atanga:
  • Verify the encoder's IP address is correct and reachable from your computer.
  • Ensure your computer is on the same network segment as the encoder.
  • Monokia mo te wa poto tetahi papangaahi, rorohiko wheori ranei i runga i to rorohiko e aukati ana i te uru.
  • Try using the Axis IP Utility to rediscover the device.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

Mō ngā mōhiohio taipitopito mō te pūtāhui, te tautoko hangarau, me ngā rauemi tāpiri, tirohia te paetukutuku mana o Axis Communications website. You can find product documentation, FAQs, and contact information for customer service.

Whaimana Webpae: www.axis.com

Ina whakapā atu koe ki te tautoko, kia rite mai tō tau tauira hua (01679-001) me te tau rangatū.