Fanvil WB101 Wallmount Bracket Instruction Manual

1. Kupu Whakataki

This manual provides comprehensive instructions for the installation and use of the Fanvil WB101 Wallmount Bracket. This bracket is designed to securely mount compatible Fanvil X-series IP phones to a wall, optimizing desk space and improving accessibility. Please read this manual thoroughly before installation to ensure proper setup and safe operation.

2. Nga korero haumaru

• Ensure the mounting surface is strong enough to support the weight of the bracket and the phone.
• Whakamahia ngā taputapu me ngā taputapu e tika ana mō te tāutanga. Ki te kore koe e tino mōhio, whakapā atu ki tētahi tohunga ngaio.
• Puritia nga waahanga iti kia kore e taea e nga tamariki kia kore e koowaotia.
• Do not overtighten screws, as this may damage the bracket or the wall.
• Verify the phone is securely attached to the bracket after installation.

3. Ihirangi mokete

Please check the package contents upon opening. If any items are missing or damaged, contact your vendor.

• Fanvil WB101 Wallmount Bracket
• Nga Tiu Whakapiri (kei roto tonu)
• Wall Anchors (typically included)

4. Tatūnga me te Tāuta

Follow these steps to install the Fanvil WB101 Wallmount Bracket and attach your Fanvil X-series phone.

4.1. Mounting the Bracket to the Wall

1. Tīpakohia he Tauwāhi: Choose a suitable wall location that is structurally sound and allows for easy access to the phone.
2. Tohua nga Tohu Keri: Hold the WB101 bracket against the wall at the desired height. Use a pencil to mark the positions for the mounting screws through the designated holes on the bracket.
3. Rua rua: Using an appropriate drill bit for your wall type (e.g., masonry for concrete, wood bit for studs), drill pilot holes at the marked locations. If drilling into drywall without a stud, insert wall anchors into the drilled holes.
4. Tiakina te Taiapa: Align the bracket with the drilled holes and secure it to the wall using the provided mounting screws. Ensure the bracket is level and firmly attached.

4.2. Attaching the Phone to the Bracket

The Fanvil WB101 bracket is compatible with Fanvil X1S, X1SP, X3S, X3SP, X3SG, and X3U phones.

1. Remove Phone Stand: If your Fanvil phone has a desktop stand attached, remove it according to your phone's instructions.
2. Align Phone: Carefully align the mounting points on the back of your Fanvil phone with the corresponding clips and slots on the WB101 wallmount bracket.
3. Waea Haumaru: Gently slide the phone onto the bracket until it clicks into place or is firmly seated. Ensure all clips engage properly. Some phone models may require a screw to further secure the phone to the bracket (refer to your phone's manual for specific details).
4. Whakaha Uepu: Route any necessary cables (e.g., Ethernet, power) through the designated openings on the bracket or phone to maintain a tidy appearance.

5. Whakamahinga

Once installed, the Fanvil WB101 bracket securely holds your compatible Fanvil IP phone on the wall. This frees up desk space and positions the phone for convenient use in various environments such as offices, reception areas, or common spaces. Ensure all cables are properly connected to the phone for full functionality.

6. Tiaki

• Te horoi: To clean the bracket, gently wipe it with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.
• Tirotiro: Periodically check the mounting screws and the phone's attachment to the bracket to ensure they remain secure.

7. Te Raru

• Bracket feels loose on the wall: Ensure mounting screws are tightened sufficiently and wall anchors (if used) are properly installed. The wall surface must be capable of supporting the weight.
• Phone does not fit the bracket: Verify that your phone model is listed as compatible (Fanvil X1S, X1SP, X3S, X3SP, X3SG, X3U). Ensure the phone's desktop stand has been removed.
• Phone is not secure on the bracket: Make sure the phone is correctly aligned with the bracket's clips and slots and fully engaged. Apply gentle pressure until it locks into place.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the documentation provided with your Fanvil phone or visit the official Fanvil website. Contact your vendor or Fanvil customer service for assistance with product-related inquiries or issues.