KEF KW1TXRX Wireless Subwoofer Adapter Kit User Manual

1. Kupu Whakataki

The KEF KW1TXRX Wireless Subwoofer Adapter Kit provides a high-quality, wireless audio connection for compatible KEF subwoofers. This kit allows for flexible placement of your subwoofer without the need for long, unsightly cables, ensuring optimal sound performance and room aesthetics. Operating in the 5GHz band, the KW1TXRX delivers audio up to 24bit/48kHz with minimal latency, preserving the detail and impact of your audio.

He aha kei roto i te Pouaka

• Kaituku Ahokore
• Kaiwhiwhi Ahokore
• Tauira USB
• RCA Taura
• RCA Whāurutau

Nga waahanga matua

• Wireless subwoofer kit, compatible with KEF Kube8b, Kube10b, Kube12b, and KF92 Subwoofers.
• High-quality wireless transmission delivers every ounce of detail and impact from your favourite films and music.
• Operates in the high-bandwidth 5GHz band, delivering audio up to 24bit/48kHz.
• Features a range of up to 30m (line of sight) making optimal placement easy.
• Designed with latency of less than 17ms.

2. Nga korero haumaru

Pānuihia, kia mārama hoki ngā tohutohu haumaru katoa i mua i te whakamahinga o tēnei hua. Puritia tēnei pukapuka hei tirotiro māu ā muri ake nei.

• Kaua e tukuna te taputapu ki te ua, te makuku, te maturuturu, te pakaru ranei.
• Kaua e waiho nga mea kua whakakiia ki te wai, penei i nga ipu, ki runga i te taputapu.
• Me whakarite kia tika te hau; kaua e aukati i nga whakatuwheratanga hau.
• Whakamahia anake nga taapiri / taputapu kua tohua e te kaihanga.
• Disconnect the device during lightning storms or when unused for long periods.
• Tukuna nga ratonga katoa ki nga kaimahi ratonga whai tohu.

3. Tatūnga me te Tāuta

Image: The KEF KW1TXRX Wireless Subwoofer Adapter Kit, showing both the transmitter (left) and receiver (right) units. Both are compact, black, and feature the KEF logo.

Whakaahua: Rear view of the KEF KW1TXRX transmitter unit. It features a 'PAIR' button, 'LINE IN' RCA inputs (white and red), and a 5V==1A USB power input.

Te hono i te Kaituku

1. Connect the provided USB cable to the 5V==1A port on the transmitter unit. Connect the other end of the USB cable to a suitable USB power source (e.g., a USB wall adapter, not included, or a USB port on your audio source device if available).
2. Using the supplied RCA cable and adaptor, connect the 'LINE IN' RCA inputs on the transmitter to the subwoofer output (LFE or Sub Out) of your audio source (e.g., AV receiver, pre-amplifier). Ensure correct polarity (red to red, white to white if applicable, or use the single LFE connection).
3. Place the transmitter in a location that allows for a clear line of sight to the receiver, ideally within 30 meters.

Te hono i te Kaiwhiwhi

Image: The KEF KW1TXRX receiver unit is shown attached to the rear panel of a KEF KF92 subwoofer. The receiver plugs directly into a dedicated port on the subwoofer.

Whakaahua: He tata view of the KEF KW1TXRX receiver unit plugged into the back of a KEF Kube series subwoofer. The receiver is designed to integrate seamlessly with compatible KEF subwoofers.

1. The receiver unit is designed to plug directly into compatible KEF subwoofers (Kube8b, Kube10b, Kube12b, KF92) via a dedicated port. Align the receiver with the port on your subwoofer and gently push it in until it is securely seated.
2. Ensure the subwoofer is powered on. The receiver draws power directly from the subwoofer.

Te Honohono i ngā Wāhanga

The transmitter and receiver units are typically pre-paired from the factory. If they do not connect automatically, follow these steps to manually pair them:

1. Me mohio kei te kaha te hiko o te kaiwhakawhiti me te waeine.
2. Press and hold the 'PAIR' button on the transmitter unit for a few seconds until its indicator light begins to flash.
3. Within 30 seconds, press and hold the 'PAIR' button on the receiver unit (located on the side or top, depending on the model) until its indicator light also begins to flash.
4. Once both lights stop flashing and remain solid, the units are successfully paired.

4. Mahi

Once the KEF KW1TXRX units are set up and paired, they will automatically establish a wireless audio link when powered on. The system operates on the 5GHz frequency band to minimize interference and ensure stable, high-fidelity audio transmission.

• Kounga Ororongo: The system supports audio transmission up to 24-bit/48kHz, ensuring that the subwoofer receives a high-resolution signal.
• Rooputanga: With a latency of less than 17ms, the audio signal is transmitted with minimal delay, ensuring synchronization with your main speakers.
• Awhe: The effective operating range is up to 30 meters (line of sight). Obstacles suchs as walls or large furniture may reduce this range.

5. Tiaki

To ensure the longevity and optimal performance of your KEF KW1TXRX Wireless Subwoofer Adapter Kit, follow these simple maintenance guidelines:

• Te horoi: Use a soft, dry cloth to wipe the surfaces of the transmitter and receiver. Do not use liquid cleaners, aerosols, or abrasive chemicals, as these can damage the finish or internal components.
• Turanga: Avoid placing the units in direct sunlight, near heat sources, or in areas with high humidity or extreme temperatures.
• Rokiroki: Mena he roa te wā e rongoa ai ngā waeine, momotuhia mai i te hiko ka rongoa ki te wāhi hauhautanga, maroke hoki.
• Te whakahaere: Handle the units with care. Avoid dropping them or subjecting them to strong impacts.

6. Te Raru

If you encounter issues with your KEF KW1TXRX kit, please refer to the following common troubleshooting steps:

7. Whakatakotoranga

8. Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the official KEF website or contact KEF customer service directly. Keep your proof of purchase for any warranty claims.

Rauemi ipurangi: Haerenga us.kef.com for product registration, FAQs, and additional support materials.