IROAD NX7 Dash Cam User Manual

Kupu Whakataki

This manual provides detailed instructions for the installation, operation, and maintenance of your IROAD NX7 Dash Cam. The IROAD NX7 is a high-performance 2-channel Full HD 1080P dash camera designed to record driving footage and provide parking surveillance. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i te kete:

• IROAD NX7 Main Unit (Front Camera)
• Kāmera Whakamuri
• Tauira Hononga Camera Rear
• OBD-II Power Cable (for general and hybrid vehicles)
• Kari MicroSD 16GB
• Pukapuka Kaiwhakamahi (tenei tuhinga)
• Ngā Maunga Piripiri
• Uera Whakatau
• GPS Antenna (optional add-on)

Image: IROAD NX7 Dash Cam main unit and rear camera, illustrating the primary components included in the package.

Ka mutu te huaview

Kia mohio koe ki nga waahanga me o raatau mahi.

Image: Detailed diagram showing the front camera (main unit) and rear camera with labeled parts such as camera lens, security LED, operation LED, bracket, DC-IN power terminal, GPS terminal, power switch, memory card slot, front terminal, and rear camera lens.

Wāhanga Matua (Kāmera o Mua)

• Arotahi kāmera o mua: Ngā tuhinga mō te view through the front windshield.
• LED Haumarutanga: Indicates recording status and acts as a security deterrent.
• Mahi LED: Shows the device's operational status.
• 3-inch Touch Panel Display: Mo viewkei te ora footage, playback, and accessing settings.
• Miihini Kaari MicroSD: Insert the provided MicroSD card for video storage.
• Whakawhiti Kaha: Hei whakakā, whakaweto rānei i te taputapu.
• DC-IN Power Terminal: Connects to the power cable.
• GPS Terminal: Connects to the optional GPS antenna for location and speed data.
• Rear Camera Terminal: Connects the rear camera cable.

Kāmera Whakamuri

• Arotahi kāmera o muri: Ngā tuhinga mō te view through the rear windshield.
• Mahi LED: Indicates the rear camera's operational status.

Tatūnga

1. Whakaurunga Kāri MicroSD

1. Me whakaweto te mana o te kāmera papaaho.
2. Locate the MicroSD card slot on the side of the main unit.
3. Insert the provided 16GB MicroSD card into the slot until it clicks into place. Ensure the correct orientation.

2. Main Unit Installation (Front Camera)

1. Clean the area on your front windshield where you intend to mount the dash cam.
2. Attach the adhesive mount to the main unit.
3. Remove the protective film from the adhesive mount.
4. Firmly press the dash cam onto the chosen spot on the windshield, ensuring a clear view of the road. Position it centrally, behind the rearview mirror if possible, to avoid obstructing your view.

3. Whakamutunga Camera Rear

1. Clean the area on your rear windshield for the rear camera.
2. Attach the adhesive mount to the rear camera.
3. Remove the protective film and firmly press the rear camera onto the rear windshield, ensuring a clear view.
4. Connect the rear camera to the main unit using the provided rear camera connection cable. Route the cable neatly along the vehicle's headliner and pillars to conceal it.

4. Power Connection (OBD-II)

1. Kimihia te tauranga OBD-II o tō waka (i raro i te papatohu i te taha o te taraiwa).
2. Connect the OBD-II power cable to the OBD-II port.
3. Connect the other end of the OBD-II power cable to the DC-IN power terminal on the main unit.
4. Whakaterea te taura hiko kia ma, kia kore ai e pokanoa ki ngā mana taraiwa.

5. GPS Antenna Connection (Optional)

1. If using the optional GPS antenna, connect it to the GPS terminal on the main unit.
2. Whakanuia te antenna GPS ki tetahi waahi maamaa view of the sky, typically on the dashboard or near the windshield.

Nga Tohutohu Whakahaere

Te Hia/Weto

• Whakahiko: Once connected to power, the dash cam will automatically power on when the vehicle's ignition is turned on.
• Weto Whakakore: The dash cam will automatically power off when the vehicle's ignition is turned off. You can also manually power off using the power switch.

Ngā Whakakotahitanga Whakamuri

The IROAD NX7 supports various recording modes:

• Te tuhi Tonu: Automatically starts recording when the device powers on. Footage is saved in short segments and overwritten by new recordings once the MicroSD card is full (loop recording).
• Event Recording (Impact Recording): When an impact is detected by the G-sensor, the dash cam automatically saves the current footage hei huihuinga file, e ārai ana i tōna tuhiruatanga.
• Parking Surveillance (24-hour Recording):
  • Kitenga Nekehanga: Records automatically when motion is detected around the vehicle while parked.
  • Impact Recording: Records when an impact is detected while parked.

  Note: Parking surveillance requires a continuous power supply, typically provided by the OBD-II cable.

Mahi Paewhiri Pa

The 3-inch touch panel allows for easy navigation and control:

• Tap icons to access menus, settings, and playback.
• Swipe to navigate through lists or video files.
• Adjust settings such as recording resolution, G-sensor sensitivity, and parking mode options.

Viewi nga Rekoata

• I runga i te Pūrere: Access the playback menu on the touch screen to view recorded videos directly.
• I runga i te Rorohiko: Remove the MicroSD card from the dash cam and insert it into a computer's card reader. Use the dedicated IROAD PC Viewer software (available for download from the IROAD webpae) ki view me te whakahaere i ngā rekoata.

LED Signal Compatibility

The IROAD NX7 is designed to minimize flicker when recording LED traffic signals, ensuring clear capture of signal lights.

Te tiaki

Whakahaere Kāri MicroSD

• Te Whakahōputu Auau: It is recommended to format the MicroSD card regularly (e.g., once a month) to maintain optimal recording performance and prevent data corruption. This can usually be done through the dash cam's settings menu or via the PC Viewer pūmanawa.
• Te Roanga o te Kāri: MicroSD cards have a limited lifespan due to continuous writing cycles. Replace the card if you experience frequent recording errors or data loss.

Te horoi i te Pūrere

• Use a soft, dry cloth to clean the dash cam's body and lenses.
• Kaua e whakamahia ngā kaihoroi whakakoi, ngā whakarewa rānei, nā te mea ka kino pea te taputapu.
• Ensure the lenses are clean and free of smudges for clear video quality.

Raparongoā

Whakatakotoranga

Pūtāhui me te Tautoko

Specific warranty information for the IROAD NX7 Dash Cam is typically provided with the product packaging or can be found on the official IROAD website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please refer to the contact information provided by your retailer or the IROAD official support channels.

Always ensure you are using official IROAD accessories and software for optimal performance and to maintain warranty validity.