IROAD NX7 Dash Cam User Manual

1. Kupu Whakataki

Thank you for choosing the IROAD NX7 Dash Cam. This manual provides detailed instructions for the installation, operation, and maintenance of your new dash camera. The IROAD NX7 is a high-performance 2-channel dash cam featuring Full HD 1080P recording for both front and rear cameras, a 3-inch touch panel display, 24-hour parking surveillance with motion and impact detection, and advanced driving assistance systems (ADAS).

2. Ihirangi mokete

Tena koa tirohia nga mea katoa e whai ake nei kei roto i to kete:

• IROAD NX7 Front Dash Cam Unit
• Kāmera Whakamuri
• Tauira Hononga Camera Rear
• OBDⅡ Power Cable (for general and hybrid vehicles)
• Kari MicroSD 16GB
• Pukapuka Kaiwhakamahi (tenei tuhinga)
• Ngā Maunga Piripiri

3. Hua Neke Atuview

Familiarize yourself with the components and ports of your IROAD NX7 Dash Cam.

Whakaahua 3.1: The IROAD NX7 main dash cam unit and its accompanying rear camera, showcasing to ratou hoahoa kiato.

Whakaahua 3.2: IROAD NX7 Front and Rear Dash Cam with labeled components. The image shows the front camera with its lens, security LED, and operation LED. The rear camera is also shown. Various ports are labeled: DC-IN power terminal, GPS terminal, rear camera terminal, memory card slot, power switch, and bracket.

Whakaahua 3.3: He runga-iho view of the IROAD NX7 dash cam and its rear camera, highlighting their sleek design.

• Arotahi kāmera: Ka hopu ataata footage.
• LED Haumarutanga: Indicates security recording status.
• Mahi LED: Indicates device operation status.
• Taiapa: Used for mounting the dash cam.
• DC-IN Power Terminal: Connects to the power cable.
• GPS Terminal: For connecting an external GPS module (if applicable).
• Mokamoka Kaari Pumahara: Insert the MicroSD card here.
• Whakawhiti Kaha: Ka whakakā/whakaweto i te taputapu.
• Front Terminal: Connection point for the front camera (if separate).
• Rear Camera Terminal: Ka hono i te kamera o muri.

4. Tatūnga me te Tāuta

4.1 Te Whakarite i te Kāri MicroSD

1. Before first use, it is recommended to format the included 16GB MicroSD card using the IROAD PC Viewer software or directly on the device via the touch screen menu.
2. Insert the MicroSD card into the memory card slot until it clicks into place. Ensure the card is inserted correctly to avoid damage.

4.2 Te Whakamau i te Kāmera Papaaho

The IROAD NX7 uses an adhesive mounting method for secure attachment.

1. Kōwhiria he wāhi pai rawa atu i runga i tō matapihi mua, i muri i te tuara o te motuka.view whakaata, kia kore ai e ārai i tō view.
2. Clean the chosen area on the windshield thoroughly to ensure strong adhesion.
3. Attach the adhesive mount to the dash cam bracket.
4. Peel off the protective film from the adhesive pad and firmly press the dash cam with the mount onto the cleaned windshield area for at least 30 seconds.
5. Repeat the process for the rear camera, mounting it on the rear windshield.

4.3 Te Mana Hononga

The IROAD NX7 comes with an OBDⅡ power cable for easy and reliable power supply.

1. Locate your vehicle's OBDⅡ port (usually under the dashboard on the driver's side).
2. Connect the OBDⅡ power cable to the OBDⅡ port.
3. Connect the other end of the OBDⅡ power cable to the DC-IN Power Terminal on the IROAD NX7 front dash cam.
4. Route the power cable neatly along the vehicle's interior trim to avoid interference with driving.
5. Connect the rear camera to the front unit using the provided rear camera connection cable.

5. Nga Tohutohu Whakahaere

5.1 Kei te Hiko / Weto

• The dash cam will automatically power on and begin recording when your vehicle's ignition is turned on, provided it is connected via the OBDⅡ power cable.
• To manually power off, press and hold the Power Switch until the device shuts down.

5.2 Basic Recording Modes

The IROAD NX7 supports continuous recording, event recording, and parking surveillance recording.

• Te tuhi Tonu: Ka tīmata aunoa ina whakakāhia te waka.tage is recorded in 1-minute segments and saved to the MicroSD card.
• Event Recording (Impact Recording): In case of a sudden impact or collision, the G-sensor triggers an event recording, saving the footage separately to prevent overwriting.
• Loop Recording (Overwrite Recording): When the MicroSD card is full, the oldest continuous recording files are automatically overwritten to make space for new recordings. Event recordings are protected from overwriting.

5.3 Aratau Tirotiro Waka

The IROAD NX7 offers 24-hour parking surveillance with advanced features:

• Kitenga Nekehanga: The dash cam detects motion around the vehicle and automatically records footage.
• Kitenga Pānga: If an impact is detected while parked, the device records and saves the event footage.
• Time-lapse & Hyperlapse: For extended parking surveillance, the dash cam can record in time-lapse mode, compressing long periods into shorter videos, saving storage space.
• Battery Over-discharge Prevention: The dash cam monitors your vehicle's battery voltage and automatically cuts off power if the voltage drops below a set threshold, preventing battery drain.

5.4 Touch Panel Operation

The 3-inch touch panel allows for easy navigation and settings adjustment.

• Tap icons to access menus such as Live View, Playback, Settings, and File Whakahaerenga.
• Swipe to navigate through recorded files.
• Adjust settings like recording resolution, G-sensor sensitivity, parking mode options, and time/date.

5.5 Advanced Driving Assistance Systems (ADAS)

The IROAD NX7 includes ADAS features to enhance driving safety:

• LDWS (Punaha Whakatupato Whakarerenga Rarangi): Alerts you if your vehicle drifts out of its lane.
• FCWS (Punaha Whakatupato Tutuki Whakamua): Warns you of an impending collision with a vehicle ahead.
• FVDW (Front Vehicle Departure Warning): Notifies you when the vehicle in front starts moving from a standstill.

Note: ADAS features are supplementary and should not replace safe driving practices.

5.6 Hototahi ki te Rama Tohu LED

The IROAD NX7 is designed to record clearly even when facing LED traffic signals, minimizing flicker and ensuring reliable footage.

6. Tiaki

6.1 Whakahaere Kāri MicroSD

• Regularly format the MicroSD card (at least once a month) to maintain optimal recording performance and prevent data corruption. This can be done via the dash cam's settings or the IROAD PC Viewē.
• Use only high-quality, genuine MicroSD cards recommended by IROAD.
• Replace the MicroSD card every 6-12 months, depending on usage, as flash memory has a limited lifespan.

6.2 Te horoi i te taputapu

• Wipe the camera lenses and the device body with a soft, dry, lint-free cloth.
• Do not use chemical cleaners or abrasive materials, as they may damage the device.
• Me whakarite kua whakawetohia te hiko o te taputapu i mua i te horoinga.

7. Te Raru

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the warranty card included with your product or visit the official IROAD webpae. Puritia to riirii hoko hei tohu mo te hoko mo nga kereme whakamana.

For further assistance, you may contact IROAD customer service through their official channels.