Pukapuka Tohutohu mō te Pūihi SMA Aukume Wi-Fi Takirua-Pae Teltonika PR1KRD30

1. Kupu Whakataki

This instruction manual provides essential information for the proper installation, operation, and maintenance of the Teltonika PR1KRD30 Wi-Fi Dual-Band Magnetic SMA Antenna. This antenna is designed to enhance Wi-Fi connectivity for compatible Teltonika routers, specifically the RUTX10, RUTX11, RUTX12, RUTX14, and RUTXR1 models.

The PR1KRD30 antenna features dual-band support, a magnetic mounting base for flexible placement, and an RP-SMA male connector for secure attachment.

2. Ihirangi mokete

• 1x Teltonika PR1KRD30 Wi-Fi Dual-Band Magnetic SMA Antenna

3. Tatūnga me te Tāuta

Follow these steps to properly set up your Teltonika PR1KRD30 antenna:

1. Identify Connection Ports: Locate the Wi-Fi antenna ports on your compatible Teltonika router (RUTX10, RUTX11, RUTX12, RUTX14, or RUTXR1). These ports are typically labeled for Wi-Fi antennas.
2. Honoa te Antenna: Carefully align the RP-SMA male connector of the PR1KRD30 antenna with the corresponding Wi-Fi antenna port on your router. Gently screw the connector clockwise until it is finger-tight. Avoid over-tightening to prevent damage.
3. Whakanohoia te Antenna: The PR1KRD30 features a magnetic base. Place the antenna on a flat, metallic surface for optimal stability and signal reception. Consider placing it in an elevated position or near a window for improved signal strength. The antenna cable length is 1.5 meters, allowing for flexible placement.
4. Manatokohia te Hononga: Ensure the antenna is securely attached and positioned. Once connected, power on your router and verify Wi-Fi functionality.

Image: The Teltonika PR1KRD30 antenna, showing its magnetic base and the RP-SMA male connector at the end of its 1.5-meter cable. This antenna is designed for enhancing Wi-Fi signals for compatible Teltonika routers.

4. Nga Tohutohu Whakahaere

The Teltonika PR1KRD30 antenna operates passively to enhance the Wi-Fi signal of your connected router. No specific user configuration is required for the antenna itself once it is physically connected.

• Mahinga Takirua-Taua: The antenna supports both 2.4 GHz (2400-2483.5 MHz) and 5 GHz (5150-5905 MHz) Wi-Fi frequency bands, providing flexibility for various network environments.
• Arotautanga Tohu: For optimal performance, ensure the antenna is positioned away from large metal objects or other sources of electromagnetic interference. Experiment with different placements to find the best signal strength.
• Tautuhinga Pouara: Any Wi-Fi network configuration, such as SSID, password, or channel selection, is managed through your connected Teltonika router's interface. Refer to your router's manual for these settings.

5. Tiaki

The Teltonika PR1KRD30 antenna requires minimal maintenance to ensure long-term performance.

• Te horoi: Periodically wipe the antenna's exterior with a soft, dry cloth to remove dust. Do not use harsh chemicals or abrasive cleaners.
• Nga Tikanga Taiao: The antenna is designed to operate within a temperature range of -40 °C to +75 °C. Avoid exposing it to extreme temperatures outside this range or to excessive moisture.
• Tirotiro tinana: Regularly check the cable and connector for any signs of damage. Ensure the magnetic base remains securely attached to its mounting surface.

6. Te Raru

Mena ka raru koe ki to antenna, whakaarohia nga mahi rapurongoā e whai ake nei:

• Poor Wi-Fi Signal:
  • Ensure the antenna is securely connected to the router's Wi-Fi port.
  • Relocate the antenna to a different position, preferably higher or closer to the area requiring better coverage, and away from obstructions.
  • Verify that your router's Wi-Fi settings are correctly configured (e.g., correct frequency band selected if applicable).
• Karekau he Hononga Wi-Fi:
  • Confirm the antenna connector is fully tightened.
  • Test with another compatible antenna if available, to rule out an antenna fault.
  • Check your router's status indicators and settings to ensure its Wi-Fi module is active.
• Tukino Tinana: If the antenna or cable appears damaged, discontinue use and contact your reseller or Teltonika support for assistance.

7. Whakatakotoranga

8. Pūtāhui me te Tautoko

For warranty information, please refer to the documentation provided with your purchase or contact your authorized Teltonika reseller. General product support and technical assistance can be obtained through the official Teltonika Networks website or by contacting their customer support channels.