Sena SF2-03D SF2 Bluetooth Communication System

Kupu Whakataki

The Sena SF2-03D SF2 Bluetooth Communication System is designed to provide reliable two-way intercom communication and smartphone connectivity for riders. This system facilitates rider-to-passenger communication and allows for simultaneous enjoyment of music and intercom functions.

Ko nga ahuatanga matua ko:

• Rider to Passenger 2-way intercom communication up to 800 meters (880 yards) in open terrain.
• Smartphone connectivity for various functions.
• Audio Overlay feature for simultaneous music listening and intercom use.
• Built with Bluetooth technology 4.1.

Note: Audio Overlay functionality works best with Android devices; iOS offers limited functionality.

Ka mutu te huaview

The Sena SF2-03D system includes the main communication unit, speakers, and a microphone, designed for integration into a helmet.

Whakaahua 1: Complete Sena SF2-03D system components, showing the main unit, two speakers, and a boom microphone.

The main unit features intuitive controls for easy operation while riding.

Whakaahua 2: Mua view of the SF2 main unit, highlighting the central control button and the '+' and '-' buttons for volume adjustment and navigation.

The side of the unit houses the charging port.

Whakaahua 3: Te taha view of the SF2 main unit, displaying the USB charging port for power input.

A protective cover ensures the charging port remains secure when not in use.

Whakaahua 4: Runga/raro view of the SF2 main unit, showing the USB port with its protective cover closed.

Tatūnga

1. Tāutanga

Install the main unit, speakers, and microphone securely into your helmet according to the helmet's design and Sena's general installation guidelines. Ensure speakers are positioned directly over your ears for optimal audio quality and the microphone is close to your mouth.

2. Ka tohatohahia te Pūrere

Before initial use, fully charge the SF2 unit. Connect the provided USB cable to the charging port on the side of the unit (refer to Figure 3) and plug it into a USB power source. The LED indicator will change color to indicate charging status and full charge.

3. Whakahoahoa me te Waea atamai

1. With the SF2 unit powered off, press and hold the central button until the LED flashes rapidly, indicating pairing mode.
2. On your smartphone, navigate to the Bluetooth settings and enable Bluetooth.
3. Select 'Sena SF2' from the list of available devices.
4. Once paired, the LED on the SF2 unit will change to a solid blue or flash slowly.

Te whakahaere

1. Te Hiko / Whakaweto

• Whakahiko: Press and hold the central button and the '+' button simultaneously for 1 second.
• Weto Whakakore: Press and hold the central button and the '+' button simultaneously for 5 seconds.

2. Whakawhitiwhiti Kōrero ā-Ipurangi

The SF2 supports 2-way intercom communication between a rider and a passenger. To initiate intercom:

• Ensure both SF2 units are powered on and within range (up to 800m in open terrain).
• Briefly press the central button on either unit to start or end an intercom conversation.

3. Music Playback and Audio Overlay

Once paired with your smartphone, you can stream music. The Audio Overlay feature allows you to listen to music while maintaining an active intercom conversation.

• Purei/Tatari Puoro: Press the central button for 1 second.
• Riu Panuku: Press the '+' button for 1 second.
• Riu o mua: Press the '-' button for 1 second.

4. Mana Rōrahi

Adjust the volume for music, intercom, and phone calls using the '+' and '-' buttons.

• Whakanuia te Volume: Briefly press the '+' button.
• Whakaheke Rahi: Briefly press the '-' button.

Te tiaki

1. Te horoi

Regularly clean the exterior of the SF2 unit with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the device. Ensure the USB port cover is closed when not charging to prevent dust and moisture ingress.

2. Rokiroki

When not in use for extended periods, store the SF2 system in a cool, dry place. It is recommended to charge the battery to approximately 50% before long-term storage to preserve battery health.

Raparongoā

1. Kaore te Pūrere i te hiko

• Ensure the battery is charged. Connect the unit to a power source and check the charging indicator.
• Attempt to reset the device by holding the central button for 10 seconds.

2. Nga Take Takirua

• Ensure the SF2 unit is in pairing mode (rapidly flashing LED).
• Whakawetohia te Nihokikorangi o to waea atamai.
• Clear previous Bluetooth pairings on both devices and attempt to pair again.

3. Kāore he Ororongo, he Kounga Ororongo Kino rānei

• Check the volume levels on both the SF2 unit and your connected smartphone.
• Ensure speakers are correctly positioned within the helmet.
• Verify all connections between the main unit, speakers, and microphone are secure.

Whakatakotoranga

Pūtāhui

This product is covered by a Manufacturer Warranty. For specific details regarding warranty duration and terms, please refer to the documentation included with your purchase or visit the official Sena webpae.

Tautoko

For further assistance, technical support, or to access additional resources, please visit the official Sena webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko.

Ka kitea e koe etahi atu korero i te SENA Store.