HelloBaby Monitor Mount User Manual

Kupu Whakataki

This manual provides detailed instructions for the installation, operation, and maintenance of your HelloBaby Monitor Mount. This flexible mount is specifically designed for use with HelloBaby monitor cameras, including models HB65, HB66, HB6250, HB6550, and HB6339. It offers a versatile solution for positioning your baby monitor without the need for tools or causing damage to walls or furniture.

Pānuihia tēnei pukapuka ā-ringa i mua i te tāutanga, ā, puritia hei tirotiro māu ā muri ake nei.

Nga korero haumaru

• Ensure the mount is securely attached to a stable surface to prevent the camera from falling.
• Keep the monitor mount and camera power cords out of reach of children to avoid strangulation hazards.
• Do not place the mount or camera directly above the baby's sleeping area. Position it to the side, ensuring a clear view.
• Regularly check the mount's stability and the camera's attachment.
• Ko tenei hua te tikanga mo te whakamahi o roto anake.

Ihirangi mokete

Manatokona kei te noho nga waahanga katoa:

• 1 x HelloBaby Flexible Monitor Mount

Note: Baby monitor camera is sold separately.

Tohutohu Tatūnga

Follow these steps to install your HelloBaby Monitor Mount:

1. Āpitihia te Kāmera: Locate the 1/4-inch screw on the mount. Align the screw with the threaded hole on the bottom of your HelloBaby monitor camera. Twist the camera clockwise onto the screw until it is securely fastened. Ensure the camera is stable and does not wobble.



2. Whakaturia te Maunga: Identify a suitable location such as a crib railing, shelf, or metal pole. The flexible gooseneck design allows it to wrap around various surfaces.
3. Tiakina te Maunga: Bend and rotate the flexible gooseneck to wrap it firmly around the chosen surface. Ensure the mount is tight and stable, preventing any movement or slippage. The mount should be positioned so that the camera has a clear and unobstructed view o te waahi e hiahiatia ana.



4. Whakaritea Koki Kamera: Once the mount is secure, adjust the camera's angle to achieve the optimal viewing perspective of your infant.

Nga Tohutohu Whakahaere

The HelloBaby Monitor Mount is designed for ease of use and flexibility:

• Te whakatikatika View: To change the camera's position or angle, gently bend and reshape the flexible gooseneck. Always ensure the mount remains securely attached to its surface after adjustment.
• Te whakanoho ano: If you need to move the camera to a different location, carefully unwrap the mount from its current position and re-secure it at the new desired spot following the setup instructions.

Te tiaki

• Te horoi: Horoia te maunga ki te ngohengohe, damp kakahu. Kaua e whakamahi i nga matū kino me nga horoi horoi.
• Tirotiro: Periodically inspect the mount for any signs of wear or damage. If any damage is observed, discontinue use and replace the mount.

Raparongoā

Issue: Mount is not stable or slips.

Rongoā: Ensure the gooseneck is wrapped tightly around the surface. Try repositioning it on a surface with better grip. Avoid overly smooth or narrow surfaces that may not provide adequate friction.

Issue: Camera view kua arai.

Rongoā: Adjust the gooseneck to change the camera's position. Ensure no crib bumpers, blankets, or other objects are blocking the camera's line of sight.

Issue: Camera feels loose on the mount.

Rongoā: Tighten the camera onto the 1/4-inch screw by twisting it clockwise until it is firm. Do not overtighten.

Whakatakotoranga

Pūtāhui me te Tautoko

For warranty information and customer support, please refer to the official HelloBaby webpaetukutuku, whakapā atu ranei ki ta raatau ratonga kaihoko. Puritia to riiki hoko hei tohu mo te hoko.

You can visit the official HelloBaby store for more products and support: HelloBaby Official Store