FOGATTI InstaShower GO Pro Portable Propane Tankless Water Heater User Manual

Kupu Whakataki

The FOGATTI InstaShower GO Pro is a compact and portable shower system designed for outdoor use. Heated by propane, it provides hot water in seconds for showering. It is lightweight and easy to store, making it an ideal companion for campte haere, te hīkoi, me era atu haerenga o waho.

Āhuatanga matua:

• Portable Shower System: Compact and portable, propane-heated for instant hot water. Ideal for camping, hiking, and outdoor adventures.
• Easy Access to Hot Water: 22,000 BTU heating output, heats in 8 seconds, 0.9 GPM hot water output, max 125°F temperature rise.
• Enjoy Showers Anytime, Anywhere: Built-in 5000 mAh rechargeable battery (80 min operation), 12V DC charging. Initial 4-hour charge recommended.
• All-in-one Solution: Efficient brushless 12V pump with 6.6 ft hose, automatic ignition for water and energy saving.
• Multi-Protections for Added Safety: Overheat, flameout, tilt, and dry burn protection. Constructed with flame-retardant materials.
• Whakamahi Waho Anake: Not for indoor installation or residential plumbing.

He aha kei roto

The FOGATTI InstaShower GO Pro comes complete with all the necessary components for immediate use:

• Portable Water Heater Unit
• 12V Cigarette Lighter Power Line
• Battery Charger (120V AC/60 Hz)
• Pukapuka Kaiwhakamahi
• Propane Adapter Hose (4 ft)
• Pet Shower Sprayer (7.2 ft)
• Pump Assemblies (12V brushless pump with 6.6 ft hose)
• Shower Head (with 9.8 ft shower hose)
• Paetukutuku Matua
• Matau ua

Tatūnga

Follow these steps to set up your FOGATTI InstaShower GO Pro:

1. Hono Puma: Connect the pump assembly to the blue water inlet port on the water heater unit.
2. Honoa te Ngongo Kaukau: Connect the shower hose to the red water outlet port on the water heater unit.
3. Hono Propane: Attach a 1lb propane cylinder directly to the rear of the unit, or use the provided adapter hose to connect to a larger propane tank. Ensure connections are tight.
4. Place Pump in Water Source: Submerge the pump into your desired water source (e.g., a bucket, lake, or stream).
5. Waeine Turanga: Place the water heater unit on a stable, level surface.

Tatūnga Ataata Aratohu:

This video provides a visual guide on the installation process of the FOGATTI InstaShower GO Pro, detailing how to connect the water pump, propane tank, and shower head for first-time use.

Nga Tohutohu Whakahaere

Once set up, operating your InstaShower GO Pro is straightforward:

1. Whakahiko: Press the power button on the unit's control panel to turn it on.
2. Whakahohe Puma: Press the pump button to start the water flow.
3. Whakaritea te Mamahana: Rotate the temperature control knob to achieve your desired water temperature (up to 125°F).
4. Pause Flow: Use the switch on the shower head to temporarily pause water flow, saving water and energy.

Ngā Aratohu Ataata Whakahaere:

This video provides a step-by-step guide on how to operate the FOGATTI InstaShower GO Pro, covering connecting the water source, propane, and activating the heating and pump functions.

This video illustrates the water flow rate of the FOGATTI InstaShower GO Pro by demonstrating how quickly it can fill a 5-gallon barrel, providing an estimate of shower duration per gallon.

Te tiaki

Specific maintenance instructions are not detailed in the provided product information. Generally, it is recommended to keep the unit clean and dry after each use. Store in a cool, dry place. Refer to the full user manual for any detailed maintenance procedures.

Raparongoā

If you encounter issues with your InstaShower GO Pro, consider the following:

• No Heat/Error Message: If the unit stops heating or displays an error, check for sufficient water flow and ensure the unit is not tilted. The flame will shut off if the tilt angle is too large or if it detects insufficient water flow.
• Te wera nui: The unit has overheat protection. If the water temperature exceeds 125°F, the fire will shut off to prevent burns and damage. Adjust the gas flow to prevent temperature spikes.
• Dry Burn Protection: If the water source runs out, the pump will stop to prevent damage to the heat exchanger or burner.
• Whakaatu Take: If the LED screen is unclear or shows black shadows, contact customer support.

Safety & Troubleshooting Video:

This video demonstrates the safety features of the FOGATTI InstaShower GO Pro, including overheat protection, dry burn protection, and tilt protection, which can help in troubleshooting common issues.

Whakatakotoranga

Pūtāhui me te Tautoko

The FOGATTI InstaShower GO Pro comes with a 12 Marama Kounga Rarangi. For any inquiries or assistance, 24/7 Tautoko Kiritaki is available. The product is also CSA Tiwhikete, ensuring it meets high safety and performance standards.