1. Kupu Whakataki
Thank you for choosing the Dripex LED Full-Length Mirror. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. Please read these instructions carefully before use and retain them for future reference.
2. Nga korero haumaru
- Always handle the mirror with care. The glass is reinforced but can still break if subjected to severe impact.
- Me mohio kua momotuhia te hiko hiko i mua i te whakaurunga, te tiaki ranei.
- Do not expose the mirror to excessive moisture or direct water spray. This product is designed for indoor use only.
- Kaua e taea e nga tamariki.
- If wall-mounting, ensure the wall structure can support the mirror's weight. Use appropriate anchors for your wall type.
- Do not attempt to repair or modify the electrical components of the mirror. Contact qualified personnel for service.
3. Ihirangi mokete
Tena koa tirohia kei te noho katoa nga waahanga me te kore e pakaru:
- Dripex LED Full-Length Mirror (130x40cm)
- Pre-assembled H-shape stand (for free-standing option)
- Wall-mounting screw set (for wall-mounted option)
- Pūurutau hiko
- Pukapuka Tohutohu
4. Tatūnga me te Tāuta
The Dripex LED Full-Length Mirror offers multiple placement options:
This image illustrates the three available placement methods for the mirror: wall-mounted, free-standing, and leaning against a wall.
4.1 Tāutanga Tu-kore
- Kia ata wetewetehia te whakaata.
- Locate the pre-assembled H-shape stand at the back of the mirror.
- Gently unfold the stand until it locks into position, providing a stable base for the mirror.
- Place the mirror on a flat, stable surface. Adjust the angle as desired.
4.2 Te Whakanohonga i runga i te Taiepa
Tuhipoka: Wall mounting requires drilling. Ensure you have the necessary tools and expertise, or consult a professional.
- Identify the desired location on the wall. Ensure there are no hidden electrical wires or pipes.
- Measure the distance between the mounting points on the back of the mirror.
- Mark the corresponding points on the wall.
- Drill holes at the marked points using an appropriate drill bit for your wall type.
- Insert wall anchors (if necessary) and then screw in the mounting screws, leaving a small portion exposed for the mirror to hang on.
- Carefully lift the mirror and align the mounting brackets on the back with the screws on the wall.
- Lower the mirror until it is securely seated on the screws.
4.3 Leaning Against the Wall
This method is suitable for temporary placement or if drilling is not desired.
- Ensure the floor surface is clean and dry.
- Place the mirror against a sturdy wall, ensuring it is stable and cannot easily tip over.
- The mirror's design includes anti-slip features to enhance stability when leaning.
5. Nga Tohutohu Whakahaere
The mirror features an integrated touch switch for controlling the LED lighting.
5.1 Hiko / Whakaweto
- Connect the power adapter to the mirror and then to a suitable power outlet.
- Tap the touch switch once to turn the LED lights on or off.
5.2 Te Whakatikatika i te Maana Tae
The mirror offers 3 adjustable color temperatures:
This image demonstrates the three available color temperatures: 6000K Cool White, 4000K Warm White, and 3000K Yellow White.
- With the lights on, short press the touch button repeatedly to cycle through the color temperatures: 3000K (Warm White), 4000K (Neutral White), and 6000K (Cool White).
5.3 Te Whakarite Tirohanga
The brightness is dimmable from 10% to 100%.
This image illustrates the dimmable brightness feature, showing the mirror's illumination at 10%, 60%, and 100% intensity.
- With the lights on, long press the touch button to adjust the brightness. The brightness will gradually increase or decrease. Release the button when the desired brightness level is reached.
6. Tiaki
To ensure the longevity and appearance of your mirror:
- Te horoi i te Mata Whakaata: Whakamahia he kakahu ngohengohe, he kakakore me te kai horoi karaihe kore. Rerehia te kai horoi ki runga i te kakahu, kaua ki runga i te whakaata, kia kore ai e uru te wai ki roto i nga waahanga hiko.
- Te horoi i te Tapare: Wipe the aluminum frame with a soft, dry cloth. Avoid harsh chemicals.
- Waea Hiko: Tirohia te taura hiko i ia wā, i ia wā, mēnā he pakaru. Mēnā kua pakaru, kati te whakamahi, ka whakapā atu ki te ratonga tautoko.
7. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Ko nga rama LED e kore e ka. | Karekau he hiko. Puurutau hiko hapa. | Ensure the power adapter is securely plugged into both the mirror and the wall outlet. Try a different outlet. If the issue persists, contact customer support. |
| Touch switch is unresponsive. | Hapa hiko rangitahi. Moisture on the touch area. | Disconnect the power for 1 minute, then reconnect. Ensure the touch area is dry and clean. |
| Ko nga rama ka kapohia, ka pouri ohorere ranei. | Putanga hiko kore. Hononga wewete. | Me mohio kei te pumau te hononga hiko. Try a different power outlet. If the problem continues, contact customer support. |
8. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Waitohu | Dripex |
| Tauira | LED Full-Length Mirror |
| Ahu | Tata ki te 130 x 40 cm |
| Rauemi Tāpare | Konumohe |
| Mata whakaata | Reinforced Shatterproof Glass |
| Momo Rama | LED |
| Te Paemahana Tae | 3000K (Warm White), 4000K (Kūpapa Mā), 6000K (Matao |
| Whakaritenga Tirohanga | Dimmable (10% to 100%) |
| Tikanga Mana | Whakawhiti Pa |
| Kōwhiringa Whakapuru | Free-standing, Wall-mounted, Leaning |
9. Pūtāhui me te Tautoko
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. Dripex is committed to providing quality products and assistance.
For further inquiries, please visit the official Dripex webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko.