Pūnaha Whakawhitiwhiti Kōrero mō te Paneoro Nihokikorangi Motopaika Sena 10S

1. Hua Neke Atuview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

Āhuatanga matua:

• Bluetooth 4.1 and Universal Intercom for broad compatibility.
• Crystal-clear HD audio with Advanced Noise Control for superior sound quality.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

Whakaahua 1.1: Mua view of the Sena 10S Motorcycle Bluetooth Headset.

2. Ihirangi mokete

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• Panui Tukuoro
• Pukuoroorooro
• Hopuoro waea
• Whakapiki Clamp Kete
• Te Mana USB me te Uera Raraunga
• Waea Ororongo
• Velcro Pads mo nga Kaikorero
• Haahi hopuoro

Figure 2.1: All components included in the Sena 10S package.

3. Tatūnga me te Tāuta

3.1 Te Whakataki i te Pūrere

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

Whakaahua 3.1: Taha view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. Wewetehia nga wiri kei muri o te clamp wae.
2. Kiriata te clamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. Tighten the screws to secure the clamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. Nga Tohutohu Whakahaere

4.1 Hiko / Whakaweto

• Whakahiko: Pēhia, pupuritia hoki te Pātene Waea me te Waea Whakaoho mō te 1 hēkona.
• Weto Whakakore: Tap the Phone Button and the Jog Dial simultaneously.

4.2 Mana Rōrahi

Hurihia te Jog Dial kia matau hei whakanui i te oro, kia maui hoki hei whakaiti i te oro.

4.3 Bluetooth Pairing (Smartphone)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. On your smartphone, enable Bluetooth and search for devices.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

4.4 Whakawhitiwhiti Kōrero ā-Ipurangi

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• Starting/Ending Intercom: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• Purei/Tatari Puoro: Pēhia me te pupuri i te Jog Dial mo te 1 hēkona.
• Whakautu/Whakamutu Waea: Patohia te Patene Waea.
• Waea reo: Patohia me te pupuri i te Paatene Waea mo te 3 hēkona.

5. Tiaki me te Tiaki

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• Keep the device dry. Moisture can damage internal circuits.
• Kaua e whakamahi i nga matū kino, i nga whakarewa horoi, i nga hopi horoi kaha hei horoi i te taputapu.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• Whakaorangia te taputapu ki te waahi makariri, maroke ina kore e whakamahia.
• Me utu te pākahiko i nga wa katoa, ahakoa kaore i te whakamahia, kia mau tonu te hauora o te pākahiko.

6. Te Raru

If you encounter issues with your Sena 10S, try the following steps:

• Kore Mana: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
• Kore Oro/Rirahi Iti: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• Kāore te Waea Whakawhiti e Hono Ana: Verify both units are powered on and within range. Re-attempt intercom pairing.
• Momotu Nihokikorangi: Ensure your paired device is within range. Try re-pairing the device.
• Tautuhi Anō i te Pūrere: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. Whakatakotoranga Hangarau

8. Ataata Hua Whaimana

9. Pūtāhui me te Tautoko

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.