Fermax Sup Milo Digital Intercom System User Manual

Kupu Whakataki

This manual provides essential instructions for the installation, operation, and maintenance of your Fermax Sup Milo Digital Intercom System. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

The Fermax Sup Milo Digital Intercom System is designed to provide clear communication and enhanced security for residential and commercial premises. It integrates advanced technology with a robust design to offer reliable access control and communication solutions.

Nga korero haumaru

Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons. This product should only be installed and serviced by qualified personnel.

• Momotuhia te hiko i mua i te whakaurunga, te ratonga ranei.
• Kaua e tukuna te waeine ki te ua me te makuku.
• Me whakarite kia mau nga hononga waea katoa me te whai ki nga waehere hiko o te rohe.
• Kaua e whakatika i te waeine māu ake. Tukuna ngā mahi tiaki katoa ki ngā kaimahi tiaki whai tohu.

Ihirangi mokete

Me manatoko kei te wātea ngā wāhanga katoa i mua i te tīmatanga o te tāutanga. Ko te tikanga kei roto i te kete:

• Fermax Sup Milo Digital Intercom Unit (Aluminum Plate)
• Whakaeke taputapu
• Connection cables (may vary by kit)
• Pukapuka Kaiwhakamahi (tenei tuhinga)

Note: Specific components may vary based on the purchased kit.

Tatūnga me te Tāuta

This section outlines the general steps for installing the Fermax Sup Milo Digital Intercom System. Professional installation is recommended.

1. Whakaritenga Pae

• Choose a suitable mounting location, typically near an entrance, at an accessible height.
• Me whakarite he papa me te u te mata.
• Verify access to necessary power and communication wiring.

2. Whakapiki i te Waehe

1. Carefully remove the front panel of the intercom unit to access mounting holes.
2. Position the unit and mark the drilling points on the wall.
3. Keria he kōhao, ka whakauru i ngā punga pakitara e tika ana mēnā e tika ana.
4. Secure the intercom unit to the wall using the provided mounting screws.

3. Hononga Waea

Refer to the wiring diagram specific to your system configuration. General connections include:

• Tuku Hiko: Connect to a stable 100V power source. Ensure correct polarity.
• Communication Bus: Connect the digital bus lines to the indoor units and central control unit.
• Tukunga o te Kūaha: Connect the door release mechanism (e.g., electric strike) to the designated terminals.
• Ngā Whakauru/Putanga Awhina: Connect any additional devices such as external cameras or sensors as required.

Whakaahua 1: Mua view of the Fermax Sup Milo Digital Intercom System, showing the aluminum plate and digital keypad. This image illustrates the exterior design of the main unit.

4. Te Whakaoho me te Whirihoranga Tuatahi

1. Once all wiring is complete and secure, restore power to the system.
2. The unit will perform a self-test. Observe any indicator lights or sounds.
3. Follow the system's programming guide (usually provided separately or accessible via a master unit) to configure apartment numbers, access codes, and other settings.

Nga Tohutohu Whakahaere

Making a Call from the Outdoor Panel

1. To call an apartment: Enter the apartment number using the digital keypad.
2. Press the "Call" button (often represented by a bell icon or similar).
3. The indoor unit will ring. Once answered, communication can begin.

Receiving a Call and Opening the Door (Indoor Unit)

1. When the indoor unit rings, press the "Answer" button to establish communication with the visitor.
2. To open the door, press the "Door Release" button on your indoor unit.
3. The door will unlock for a short period.

Using Access Codes

If configured, authorized users can enter a pre-programmed access code on the outdoor digital keypad to unlock the door without needing to call an indoor unit.

1. Enter your personal access code using the digital keypad.
2. Press the "Enter" or "Door Release" button.
3. Ka iriti te tatau.

Te tiaki

Regular maintenance ensures the longevity and optimal performance of your Fermax intercom system.

Te horoi

• Horoia te taha o waho o te waeine ki te ngohengohe, damp kakahu.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.
• Ensure no liquid enters the unit's openings.

Nga tirotirohanga

• Periodically check for any visible damage to the unit or wiring.
• Me whakarite kia mau tonu ngā tīwiri whakapiri katoa.
• Test the communication and door release functions regularly.

Whakahōu Pūmanawa

If applicable, consult your installer or Fermax support for information on firmware updates that may improve performance or add new features.

Raparongoā

E aro ana tēnei wāhanga ki ngā take noa ka pā mai pea ki a koe. Mō ngā raruraru uaua ake, whakapā atu ki te tautoko hangarau.

Whakatakotoranga

Technical specifications for the Fermax Sup Milo Digital Intercom System (Model: 8424299951713).

• Tauira: Fermax Sup Milo Digital Intercom System
• Tau Wāhanga: 8424299951713
• Kaihanga: Fermax
• Ahu (Pake): Tata ki te 0.1 x 0.1 x 0.1 cm
• Weight (Unit): 108 Karamu
• Rauemi: Metal, Plastic, Polycarbonate (Aluminum Plate)
• Puna Hiko: External Power Supply (100V)
• Voltage: 100V
• Wattage: 100W
• Pikohiko e hiahiatia ana: Kao
• Tae: Multicolored (referring to internal components or subtle design elements, main plate is aluminum)

Nga korero Whakaputanga

Fermax products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Fermax webpae. Puritia to tohu hoko mo nga kereme whakamana.

Typically, warranty covers manufacturing defects for a specified period from the date of purchase. Damage due to improper installation, misuse, or unauthorized repairs is generally not covered.

Tautoko Kiritaki

If you require technical assistance, have questions about your product, or need to report a problem, please contact your local Fermax distributor or visit the official Fermax webpae mo nga rauemi tautoko.

Webpae: www.fermax.com

Kia rite mai tō nama tauira (8424299951713) me ngā taipitopito hoko ina whakapā atu koe ki te tautoko.