QISUO iScan Portable Handheld Document Scanner User Manual

Kupu Whakataki

This manual provides detailed instructions for the safe and efficient operation of your QISUO iScan Portable Handheld Document Scanner. Please read this manual thoroughly before using the device and retain it for future reference. The iScan Portable Scanner is designed for convenient scanning of A4 documents, books, and photos into JPG or PDF formats with resolutions of 300, 600, or 900 DPI. Its compact and lightweight design allows for scanning anywhere, anytime, without the need for a direct PC connection or external power supply during operation.

Ihirangi mokete

Tena koa tirohia nga mea kei roto i te kete i runga i te wetewete pouaka kia mohio kei te noho katoa nga taonga:

• 1 x iScan Scanner
• 1 x Tauira USB
• 1 x Kawea Puke
• 1 x Kakahu horoi
• 1 x Driver Disc (for optional software, device is generally driver-free)
• 1 x Pukapuka Kaiwhakamahi (Ingarihi)

Ka mutu te huaview

The iScan Portable Scanner features a user-friendly design with essential controls and ports for easy operation.

Whakaahua 1: Runga view of the iScan Portable Scanner, highlighting the control panel.

Whakaahua 2: Taha view of the iScan Portable Scanner, showing the various ports and buttons.

Ko nga ahuatanga matua ko:

• Tere Matawai Tere: Scans an A4 page in approximately 3 seconds.
• High Capacity Storage: Supports Micro SD cards up to 32GB for storing JPG/PDF files.
• Taumira Whakaritea: Offers 300, 600, and 900 DPI options for image quality.
• Driver-Free Operation: Plug and Play compatibility with Windows XP/Vista/7 and iOS 10 or higher.
• Hoahoa Kawe: Compact and lightweight for easy transport and use without external power.

Tatūnga

1. Whakauruhia nga Pataha: Open the battery compartment and insert two AA batteries (not included), ensuring correct polarity.
2. Kōkuhu Kāri SD Micro: Locate the Micro SD card slot on the side of the scanner and insert a Micro SD card (up to 32GB) until it clicks into place.
3. Whakahiko: Press the "POWER/ON" button to turn on the scanner. The display panel will light up.
4. Initial Calibration (White Balance):

   For optimal scan quality, perform a white balance calibration before first use or if scan quality degrades.

   1. Ensure no Micro SD card is inserted during calibration.
   2. Place the scanner on a clean, white piece of paper.
   3. Press and hold the "SCAN" button and the "JPG/PDF" button simultaneously for approximately 2 seconds.
   4. The red and green indicator lights will illuminate. Do not move the scanner.
   5. Wait for the red light to turn off.
   6. After the red light turns off, smoothly slide the scanner up and down the white paper until the green light also turns off. This indicates successful calibration.

   Video: Demonstrates the white balance calibration process for the portable handheld scanner.

Nga Tohutohu Whakahaere

1. Select Scan Mode (JPG/PDF): Press the "JPG/PDF" button to toggle between JPG and PDF file formats. The selected format will be displayed on the screen.
2. Adjust DPI Resolution: Press the "DPI" button to cycle through the available resolutions: 300 DPI (Low), 600 DPI (Medium), and 900 DPI (High). Choose the desired resolution based on your quality requirements.
3. Scanning a Document:
   1. Place the document you wish to scan on a flat, stable surface.
   2. Hold the scanner firmly with both hands.
   3. Press the "SCAN" button once to start scanning. The green indicator light will turn on.
   4. Slowly and steadily slide the scanner across the document, ensuring even pressure and movement. Avoid tilting or moving too quickly/slowly to prevent distortion.
   5. Press the "SCAN" button again to stop scanning. The green indicator light will turn off.
   6. Ka tiakina aunoa te ahua kua matawaihia ki te kāri Micro SD.

   Video: Demonstrates the process of scanning a document using the portable handheld scanner, including battery and SD card installation, and connecting to PC.

   

   Figure 3: The iScan Portable Scanner in action, demonstrating its fast scanning capability.
4. Te whakawhiti Files ki PC:
   1. Honoa te matawai ki to rorohiko ma te whakamahi i te taura USB kua whakaratohia.
   2. The scanner will appear as a removable disk drive.
   3. Open the drive to access your scanned JPG or PDF files.
   4. Tāruatia te files to your computer as needed.

Te tiaki

• Te horoi i te Matawai: Use the provided cleaning cloth to gently wipe the scanning glass and exterior of the device. Do not use abrasive cleaners or solvents.
• Tiaki Pūhiko: Tangohia ngā pākahiko mēnā kāore te matawai e whakamahia mō te wā roa hei ārai i te turuturu.
• Rokiroki: Store the scanner in its carry bag in a cool, dry place away from direct sunlight and extreme temperatures.

Raparongoā

Scanner not turning on:

• Check if batteries are inserted correctly and have sufficient charge.
• Replace with new batteries if necessary.

Scanned images are distorted or blurry:

• Ensure the scanner is moved slowly and steadily across the document.
• Perform a white balance calibration (refer to Setup section).
• Clean the scanning glass with the provided cloth.

Kaore e taea te whakawhiti files ki PC:

• Me mohio kei te hono pai te taura USB ki te matawai me te rorohiko.
• Whakamātauria tētahi tauranga USB rerekē i tō rorohiko.
• Verify that the Micro SD card is properly inserted into the scanner.

"ERR" message on display:

• This usually indicates a scanning error. Try rescanning the document.
• Ensure the document is flat and the scanner is moved smoothly.

Whakatakotoranga

Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the documentation included with your purchase or contact QISUO customer service. Keep your proof of purchase for warranty claims.