Kupu Whakataki
This manual provides essential information for the safe and effective use of your new replacement bulbs. Please read this manual thoroughly before installation and retain it for future reference.
These bulbs are designed as a direct replacement for Satco A3662 bulbs, offering 60W power at 130V.
Ka mutu te huaview
Image: A clear, flame-tip light bulb with a standard screw base. This bulb is designed for general illumination purposes.
The product consists of two replacement bulbs, specifically designed to be compatible with Satco A3662 models. They feature a CA10 bulb shape and operate at 60 watts and 130 volts, providing reliable illumination.
Tatūnga me te Tāuta
- Haumaru Tuatahi: Before attempting installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
- Whakaaetia te whakamatao: If replacing an existing bulb, allow the old bulb to cool completely before handling to prevent burns.
- Tango Pupura Tawhito: Wetekina marietia te pōro tawhito mai i te putanga mā te huri i te taha maui.
- Kōkuhu Purama Hōu: Gently screw the new replacement bulb into the socket by turning it clockwise until it is snug. Do not overtighten.
- Whakaora i te Mana: Once the new bulb is securely installed, restore power to the fixture.
- Whakamātautau: Whakakāhia te pana rama hei whakaū kei te tika te mahi a te pūrama.
Tuhipoka: Always handle light bulbs by their base to avoid transferring oils from your skin to the glass, which can reduce bulb life.
Nga Tohutohu Whakahaere
These bulbs are designed for standard on/off operation via a light switch. They do not require any special operating procedures beyond typical light bulb usage.
- Ensure the bulb is installed in a compatible fixture with the correct voltage (130V).
- The bulbs are rated for 60W. Do not exceed the maximum wattage rating of your light fixture.
- These bulbs are suitable for indoor use.
Te tiaki
These replacement bulbs are designed for minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- Te horoi: Before cleaning, ensure the power is off and the bulb is cool. Wipe the bulb gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Whakakapinga: Replace bulbs when they burn out. The average life of these bulbs is approximately 5000 hours.
- Rokiroki: Store unused bulbs in their original packaging in a cool, dry place to protect them from damage.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| E kore e marama te rama. | Kaore he mana ki te huringa. Kaore i tika te whakakii i te rama. Kua tae te porowhita ki te mutunga o tōna oranga. | Tirohia te wehenga ara iahiko/meka. Ensure bulb is securely tightened. Whakakapia te rama ki te mea hou. |
| Ka whiti te topuku. | Hononga wewete. Ko te whakakā rimurapa hotokore (mehemea e tika ana). | Whakapaia te rama ki roto i te turanga. Ensure fixture is not on a dimmer if bulb is non-dimmable. |
| Ka tere te wera o te rama. | Vol nui rawatage. Frequent on/off cycling. Poor ventilation in fixture. | Manatokohia te taapiri voltage. Reduce frequency of switching. Ensure adequate airflow around bulb. |
Whakatakotoranga
| Huanga | Uara |
|---|---|
| Momo Hua | Puku Whakakapinga |
| Hototahi | Satco A3662 |
| Wattage | 60W |
| Voltage | 130V |
| Hanga Topuku | CA10 |
| Te Ora Toharite | 5000 haora |
| Tikanga | Hou |
| Putunga Pupura | Karekau |
| Mahinga o roto/waho | Roo-roto |
Pūtāhui me te Tautoko
Information regarding specific warranty terms for this product is not provided in the available data. For any product support or warranty inquiries, please contact the seller or manufacturer directly through the platform where the purchase was made.
Kaihanga: Whakanuia
ASIN: B0CX8MSH8W