1. Hua Neke Atuview
The Winees WiFi Water Leak Detector S1 Lite is designed to provide real-time water leak detection and alerts, helping to prevent potential water damage in your home. This system includes a central hub and compact water sensors that communicate wirelessly.

Image: Winees S1 Lite Water Leak Detector Hub and Sensor.
- Aroturuki Mamao: Connect the hub to 2.4G WiFi for real-time monitoring via a mobile application.
- Wide Transmission Range: Sensors can communicate with the hub up to 100 meters (328 feet) away, even in basements.
- Whakamōhiotanga Inamata: Receive alerts via the app, email, and SMS when a water leak is detected.
- Whakaoho Whakarite: The hub features a 100dB alarm with high, medium, and low volume settings, and an instant mute function.
- Compact & Waterproof Sensors: Sensors are only 1.8mm thick, IP66 waterproof, and designed for placement in hidden corners.
- IFTTT Compatible: Integrates with IFTTT for enhanced smart home automation.
2. He aha kei roto i te Pouaka
Your Winees WiFi Water Leak Detector S1 Lite package includes the following components:
- 1 x Wi-Fi Hub
- 1 x Water Leak Sensor
- 1 x CR2450 Battery (pre-installed in sensor)
- 1 x Battery Cover Tool
- 1 x Aratohu Timata Tere

Image: The Winees S1 Lite package contents, showing the hub, a sensor, and the quick start guide.
3. Tohutohu Tatūnga
3.1 Download the AiDot App
- Rapua "AiDot" in your smartphone's app store (iOS or Android).
- Tikiake me te tāuta i te tono.
- Create an account and follow the in-app instructions to confirm your email.
3.2 Activate the Sensor Battery
Before use, activate the sensor by removing the plastic insulation tab from the battery compartment.
- Use the supplied battery cover tool or a coin to gently twist and open the back cover of the sensor.
- Remove the plastic insulation tab covering the CR2450 battery.
- Whakakapia te uhi pākahiko, kia mau te kati.

Image: Activating the sensor battery by removing the plastic tab.
3.3 Plug in the Wi-Fi Hub
Plug the Wi-Fi hub into a standard electrical outlet in an area with good 2.4G WiFi signal coverage. The hub will automatically enter pairing mode.
3.4 Add Devices to the App
The water leak sensor is pre-paired with the hub by default. If you need to add additional sensors or re-pair, follow these steps:
- Open the AiDot app and navigate to "My Home".
- Tap "Add Device" or the '+' icon.
- Scan the QR code located on the back of each sensor.
- Follow the on-screen prompts to assign the sensor to a room (e.g., Kitchen, Laundry Room, Basement) for easy identification.

Image: Direct pre-pairing between the hub and sensor for simplified setup.
4. Nga Tohutohu Whakahaere
4.1 Te Whakanohonga Pūoko
Place the water leak sensors in areas prone to water leaks, ensuring they lie flat on the ground. Common locations include:
- Raro totohu (kukuta, kaukau)
- E tata ana ki ngā mīhini horoi, ki ngā mīhini horoi rihi rānei
- I roto i nga ruuma, i nga ruma whaipainga ranei
- Near water heaters or sump pumps

Image: The 1.8mm thin sensor can be placed discreetly in any corner.

Image: Connect multiple sensors throughout your home for comprehensive coverage.
4.2 Te Whiwhi Whakatūpato
When a water leak is detected, the system will trigger multiple alert modes:
- Whakaoho Whakaoho: The hub will sound a 100dB alarm.
- Whakamōhiotanga Taupānga: Receive instant push notifications on your smartphone via the AiDot app.
- Email & SMS: Configured email addresses and phone numbers will receive alerts.

Image: Multiple notification methods ensure you are always informed of a leak.
4.3 Mana Whakaoho
- Whakaritea Rōrahi: The hub has buttons to adjust the alarm volume (high/medium/low).
- Whakakore Whakaoho: Press any button on the hub or use the AiDot app to instantly mute the alarm.
- Roa Whakaoho: Configure alarm duration settings (always ringing, 10 minutes, 1 minute, 30 seconds) via the app.

Image: Adjustable volume settings for the hub alarm.

Image: One-key function to turn off the alarm.
4.4 Ataata Hua Whaimana
Video: An official product video from Winees demonstrating the S1 Plus Water Leak Detector's features and benefits.
5. Tiaki
5.1 Whakakapinga Pūhiko
The water leak sensor uses a CR2450 Lithium-Ion battery. The battery life is approximately 365 days. When the battery is low, the app will notify you. To replace the battery:
- Use the supplied battery cover tool or a coin to gently twist and open the back cover of the sensor.
- Tangohia te pākahiko CR2450 tawhito.
- Whakauruhia he pākahiko CR2450 hou me te taha pai (+) e anga whakarunga ana.
- Whakakapia te uhi pākahiko, kia mau te kati.
6. Te Raru
If you encounter issues with your Winees WiFi Water Leak Detector S1 Lite, consider the following:
- Karekau he matohi: Ensure the hub is connected to a stable 2.4G WiFi network and the sensors are within the 100m transmission range. Check app notification settings and email/SMS spam folders.
- Pūoho Hehe: Verify that sensors are placed on a dry, flat surface and not in areas prone to condensation or accidental splashes.
- Nga take hono: Restart the Wi-Fi hub and your home router. Ensure the hub is placed in an area with strong WiFi signal.
- Kāore te Pūoko e Urupare: Check the sensor battery level in the app. If low, replace the battery. Re-pair the sensor with the hub if necessary.
For further assistance, refer to the detailed troubleshooting section in the AiDot app or contact Winees customer support.
7. Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Waitohu | nga waina |
| Tauira | S1 Lite |
| Puna Mana | Battery Powered (Sensor), Plug-in (Hub) |
| Pūrere Hototahi | Smartphone (via AiDot App) |
| Hunga Hua | 6.14"L x 3.27"W x 2.17"H |
| Battery Type (Sensor) | 1 Lithium-Ion (CR2450) battery required (included) |
| Tikanga Mana | Taupānga |
| Haruru Rongo | 100 Decibels |
| Momo Whakaeke | Maunga Papa |
| Awhe Morahi | 100 mita (328 putu) |
| Hangarau Hoko | WiFi Leak Detector |
| Whakatauranga parewai | IP66 |
| Taumaha Tūemi | 0.14 Kirokaramu |
8. Pūtāhui me te Tautoko
Winees is committed to providing high-quality products and customer satisfaction.
- Kaupapa Whakahoki 30-Ra: Enjoy a 30-day return window with no questions asked.
- 24-Month Unconditional Replacement: Products are eligible for unconditional replacement within 24 months of purchase.
- Pūtāhui Ora: Winees provides permanent service and technical support for its products.
- 24-Hour Quick Response: Expect a quick response to your inquiries within 24 hours.
For support, please visit the official Winees webpaetukutuku, whakapā atu ranei ki ta raatau roopu ratonga kaihoko.