Nga Korero Haumaru Nui
Please read all instructions carefully before assembly and use of this bunk bed. Keep this manual for future reference.
- Taumaha Morahi: Do not exceed the recommended weight limits for each bunk. Refer to specifications for details.
- Te Haumarutanga Pai rawa atu mō te Moenga: The top bunk is not suitable for children under 6 years of age. Ensure children understand proper use of the ladder.
- Hinga Hinga: Always use the guardrails on the top bunk. Do not allow jumping on the bed.
- Rahi Moenga: Use only mattresses of the specified size to prevent gaps that could trap a child.
- Tirotiro auau: Periodically check all connections and hardware to ensure they are tight and secure.
- Whakahau: Me whakarite kia pai te hau huri noa i te moenga.
Ihirangi mokete
Manatokohia kei te noho nga waahanga katoa i mua i te tiimata o te huihuinga. Mena kei te ngaro, kua pakaru ranei etahi waahanga, waea atu ki te tautoko a te kaihoko.
- Bunk Bed Frame Components (Headboards, Footboards, Side Rails)
- arawhata
- Bed Slats (for both upper and lower bunks)
- Pūkete Pūmārō (ngā tīwiri, ngā raka, ngā kaihoroi, te kuihi Allen)
- Pukapuka Tohutohu
Whakaritenga me nga Tohutohu Huihuinga
Assembly typically requires two adults. Clear a spacious area for assembly. Do not fully tighten bolts until all components are loosely assembled.
Hipanga 1: Wetewete me te tautuhi i nga waahanga
Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Refer to the parts list in your hardware pack to identify each piece.
Image: All components of the white metal bunk bed frame laid out before assembly.
Hipanga 2: Huihuia te Tāpare Matua
Begin by connecting the headboards and footboards to the side rails for both the upper and lower bunks. Use the provided bolts and an Allen wrench. Ensure all connections are aligned correctly before partially tightening.
Image: Partially assembled white metal bunk bed frame showing the lower and upper bunk structures.
Hipanga 3: Tāutahia ngā papa moenga
Place the metal slats onto the designated supports for both the upper and lower bunks. Secure them using the provided hardware. Ensure slats are evenly spaced and firmly attached to provide adequate mattress support.
Whakaahua: Kati-ake view of the metal slat system installed on the bunk bed frame.
Step 4: Attach the Ladder and Finalize
Attach the built-in ladder to the side of the bunk bed frame using the specified hardware. Once all components are in place, go back and fully tighten all bolts and screws. Do not overtighten.
Image: Fully assembled white metal twin over twin house bunk bed with built-in ladder.
Nga Tohutohu Whakahaere
Proper use ensures safety and longevity of your bunk bed.
- Whakamahi arawhata: Always use the built-in ladder for accessing the top bunk. Face the ladder when climbing up or down.
- Top Bunk Occupancy: Only one person should occupy the top bunk at a time.
- Karekau Hoiho: Prohibit jumping, rough play, or hanging from any part of the bunk bed.
- Rama: Ensure adequate lighting near the ladder for safe nighttime use.
Te tiaki
Mā te tiaki auau ka āwhina i te tiaki i te āhua me te haumaru o tō moenga papa.
- Te horoi: Horoia te anga whakarewa ki te ngohengohe, damp kakahu. A ape i nga kaihoroi awhiowhio me nga matū kino ka taea te pakaru i te otinga.
- Taki Pūmārō: Every 3-6 months, inspect all bolts, screws, and connections. Tighten any loose hardware to maintain structural integrity.
- Squeak Prevention: This bed is designed to be squeak resistant. If any squeaking occurs, re-tighten all hardware. Applying a small amount of silicone lubricant to metal-on-metal contact points can also help.
- Ngā Āhua Taiao: Avoid placing the bed in direct sunlight or near heat sources to prevent material degradation.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Ka wiri, karekau ranei te moenga | Nga hononga taputapu matara. | Tirohia me te whakakoi i nga tutaki me nga wiri katoa. Me whakarite kei runga te moenga i te papa taumata. |
| Haruru haruru | Loose connections or metal-on-metal friction. | Re-tighten all assembly hardware. Apply a small amount of silicone lubricant to contact points if necessary. |
| Ladder feels loose | Ladder attachment hardware is not secure. | Ensure the ladder is correctly installed and all connecting bolts are fully tightened. |
Whakatakotoranga
- Momo Hua: Twin Over Twin House Bunk Bed
- Waitohu: Whakanuia
- Tau tauira: ngā anga moenga
- Tae: Mā
- Rauemi: Te whakarewa
- Rahi Hua (L x W x H): 76.5" x 40.5" x 71"
- Huihuinga e hiahiatia ana: Ae
- Nga waahanga motuhake: Ātete ki te memeha, ātete ki te haruru
- Nga Waahanga Kei roto: Nga papa
- Kaihanga: AnhuaUSA
Pūtāhui me te Tautoko
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your purchase receipt for proof of purchase.
