eLinkSmart Slim Smart Lock YL-D208F User Manual

1. Kupu Whakataki

This manual provides detailed instructions for the installation, operation, and maintenance of your eLinkSmart Slim Smart Lock YL-D208F. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

The eLinkSmart Slim Smart Lock YL-D208F is designed for sliding glass doors, offering multiple unlocking methods and smart features for enhanced security and convenience.

2. Nga Hua o te Hua

• Tikanga Wewete Maha: Fingerprint, IC card, Password, APP control, and Mechanical Key.
• Te Mōhiotanga Tapumati Biometric: Fast and accurate fingerprint unlock in approximately 0.3 seconds.
• Urunga rangitahi: Generate one-time or time-limited passwords for guests or service personnel.
• Reversible Handle: Suitable for both left and right-opening doors.
• Upgraded Lock Body: Double hook and full steel structure for enhanced security.
• Admin Anti-locked Feature: Restricts access to administrator users only when activated.
• IPX5 Waterproof Standard: Provides protection against water splashes and rain.
• Mana Uru: Type-C emergency charging port for backup power.
• Whakaoho Pūhiko Iti: Notifies users when battery power is low.

Figure 2.1: Key features of the eLinkSmart Slim Smart Lock, highlighting its design, unlocking options, and durability.

Figure 2.2: Details of the lock's anti-lock mechanisms, including the administrator anti-lock mode and quick disengage knob.

Whakaatu 2.3: Neke Atuview of the various unlocking methods available with the smart lock.

3. Ihirangi mokete

Me manatoko kei roto i te kete ngā wāhanga katoa i mua i te tāutanga:

• Smart Lock Assembly (Front and Rear Panels)
• Mortise Lock Body with Hook
• Kī Hangarau (x2)
• Kaari RFID (x2)
• Installation Accessories (Screws, Spindles, etc.)
• Porotakaro

Figure 3.1: Contents of the eLinkSmart Slim Smart Lock package.

4. Aratohu Tāuta (Tatūnga)

Before installation, ensure your door dimensions are compatible with the lock. This lock is designed for single cylinder doors and typically takes 10-15 minutes to install without drilling, assuming existing mortise preparation.

4.1 Tirohanga Hototahi kuaha

Refer to the dimension diagram to confirm your door's thickness and mortise cutout dimensions match the lock's requirements.

Figure 4.1: Door dimension compatibility check.

4.2 Ngā Hipanga Tāutanga (Whānui i runga ake neiview)

1. Whakapaia te tatau: Ensure the door frame and mortise cutout are clean and free of obstructions.
2. Tāutahia te Tinana Maukati Mortise: Insert the mortise lock body into the door's edge. Secure it with screws.
3. Tāutahia ngā Pounamu: Insert the square spindles through the mortise.
4. Āpiti Paewhiri Mua: Connect the front panel (keypad/fingerprint reader) to the door, ensuring cables pass through the door.
5. Tāpirihia te Paewhiri Whakamuri: Connect the rear panel to the front panel's cables and secure it to the door. Ensure the handle direction is correct; it can be reversed if needed.
6. Whakauruhia nga Pataha: Whakauruhia nga pākahiko AAA e 4 ki roto i te waahanga pākahiko.
7. Taumahinga Whakamatau: After installation, test all unlocking methods and the handle operation.

For detailed, step-by-step instructions, refer to the separate installation guide included in your product packaging.

5. Nga Tohutohu Whakahaere

5.1 Te Tatūnga Tuatahi me te Rēhitatanga Kaiwhakahaere

Upon first power-up, you will need to register an administrator fingerprint or password. Follow the voice prompts or app instructions to complete this process. The administrator has full control over user management and lock settings.

5.2 Nga Tikanga Wewete

• Kauira: Whakatakotoria tō matihao kua rēhitatia ki te pūoko tapumati. Ka huakina te raka ina angitu te kitenga.
• Kupuhipa: Tāuruhia tō kupuhipa kua rēhitatia ki te papapātuhi, ā, pēhi i te pātene '#' ā muri iho.
• Kaari IC: Present your registered IC card to the card reader area on the lock.
• APP Control (Tuya): Download the Tuya Smart app, pair your lock via Bluetooth, and use the app to unlock remotely (requires a Bluetooth gateway for remote access).
• Kī Hangarau: In case of emergency or battery depletion, use the provided mechanical key to unlock the door.

5.3 Maukati i te Kuwaha

The lock will automatically engage after a short period once the door is closed. You can also manually lock it from the inside using the quick disengage anti-lock knob or by pressing a specific button on the keypad (refer to app or detailed manual for specific button). From the outside, simply close the door, and the lock will engage.

5.4 Admin Anti-locked Feature

To activate the Admin Anti-locked Feature, turn the designated button on the lock's interior panel. When active, only administrator users can unlock the door from the outside, enhancing security.

5.5 Whakahaere Pūhiko

The lock operates on 4 AAA batteries, providing up to 6 months of battery life under normal usage. A low battery alarm will sound when the batteries need replacement. In case of complete battery depletion, use the mechanical key or connect a power bank via the Type-C emergency charging port for temporary power.

Figure 5.1: Battery compartment and energy conservation features.

Figure 5.2: Type-C emergency charging port.

6. Tiaki

• Te horoi: Wipe the lock surface with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components.
• Whakakapinga Pūhiko: Replace all 4 AAA batteries when the low battery alarm sounds. Use high-quality alkaline batteries for optimal performance.
• Maihao Matapihi: Keep the fingerprint sensor clean and dry for accurate recognition.
• Nga Waahanga Hangarau: Periodically check screws and connections to ensure they are secure. Do not lubricate the lock cylinder with oil-based lubricants; use graphite powder if necessary.
• Puranga wai: While the lock has an IPX5 waterproof rating, avoid prolonged exposure to heavy rain or direct water jets to prevent potential damage.

7. Te Raru

• Maukati kaore e whakautu: Check battery levels. Replace batteries if low. If still unresponsive, use the Type-C emergency charging port with a power bank.
• Karekau te matimati i te mohio: Ensure your finger is clean and dry. Try re-registering your fingerprint if the issue persists. Ensure the sensor is clean.
• Karekau te papapātuhi e whakautu ana: Check for battery issues. Ensure no debris is obstructing the buttons.
• Nga take honohono taupānga: Ensure Bluetooth is enabled on your device. Make sure the lock is within Bluetooth range. Restart the app and try re-pairing. If using Wi-Fi, ensure your Bluetooth gateway is properly configured and connected to your network.
• Lock does not engage/disengage properly: Check for any physical obstructions in the door frame or mortise. Ensure the lock body and strike plate are aligned correctly. Verify that the handle is installed correctly and not loose.
• Difficulty programming: Refer to the detailed programming instructions in the full user manual or the Tuya Smart app. Ensure you are following the steps precisely and that you are logged in as an administrator.
• Ora pūhiko poto: Ensure you are using high-quality alkaline AAA batteries. Frequent use of Wi-Fi features (if applicable) or extreme temperatures can affect battery life.

Mena ka pa ki a koe nga take kaore i tuhia ki konei, ka hiahia awhina ano koe, tena koa whakapiri atu ki te tautoko a nga kaihoko.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

eLinkSmart provides the following warranty and support for your product:

• Kaupapa Whakahoki: 30 ra mai i te ra o te hoko.
• Kaupapa Whakawhiti: Free exchange within 180 days from the date of purchase.

If you encounter any product problems or require technical assistance, please contact our customer support team. Provide your model number (YL-D208F) and a detailed description of the issue for prompt service.

Whakapā Tautoko Kiritaki: Please refer to the contact information provided in your product packaging or on the official eLinkSmart webpae.