Pukapuka Kaiwhakamahi mō te Kāmera Papaaho Takirua ORSKEY A12 4K

1. Hua Neke Atuview

The ORSKEY A12 4K Dual Dash Cam is a comprehensive vehicle recording system designed to enhance driving safety and provide continuous surveillance. It features a 4K Ultra HD front camera and a 1080P rear camera, offering wide-angle coverage and advanced night vision capabilities. With built-in 5GHz Wi-Fi and smart app control, users can easily manage recordings, view ora footage, and access files directly from their smartphone. Key features include loop recording, a G-sensor for incident detection, and 24-hour parking monitoring.

Figure 1: ORSKEY A12 4K Dual Dash Cam with its components and app interface.

2. Ihirangi mokete

Tirohia koa ko nga mea katoa kei raro nei kei roto i to kete:

• 1 x 4K Front WiFi Dash Cam (with 64GB SD Card pre-installed)
• 1 x 1080P Rear Camera (with 6-meter extension cable)
• 1 x Cigarette Lighter Car Charger (Type-C port, 3.5 meters)
• 1 x Momo Maunga
• 1 x Kaituku Karauna
• 1 x Tautuhi Pin
• 1 x Porowhita
• 4 x Cable Hiding Clips
• 1 x Manual Tohutohu Kaiwhakamahi

Figure 2: Contents of the ORSKEY A12 4K Dual Dash Cam package.

3. Nga Hua o te Hua

3.1 High-Resolution Recording

The dash cam is equipped with a 4K Ultra HD front camera (3840x2160P@30fps) and a 1080P rear camera. Both cameras feature advanced sensors and an F1.8 large aperture, ensuring clear and detailed video capture.

Figure 3: High-resolution capture from front 4K and rear 1080P cameras.

3.2 Wide-Angle Coverage

The front camera offers a 170° ultra-wide angle, capable of covering up to 6 lanes, while the rear camera provides a 150° wide view. This extensive coverage effectively reduces blind spots and captures a comprehensive view o te huarahi.

Figure 4: Front 170° and Rear 150° wide viewnga koki.

3.3 Advanced Night Vision with WDR Technology

Equipped with F1.8 aperture lenses and Wide Dynamic Range (WDR) technology, the dash cam enhances night vision by adjusting exposure and contrast. This ensures clear recording of details like license plates and road signs, even in low-light conditions.

Figure 5: Super Night Vision with WDR Technology.

3.4 5GHz Wi-Fi & Smart App Control

Connect the dash cam to your smartphone via 5GHz Wi-Fi for effortless setup, real-time preview, data transfer, playback, and direct file downloads using the Viidure app. This allows for easy sharing of footage.

Figure 6: Dual-band 5/2.4 GHz WiFi for faster app control.

3.5 Te Hopu Porowhita me te Pūoko-G

The dash cam supports loop recording, automatically overwriting the oldest files when the memory card is full. A built-in G-sensor automatically locks and saves video footage i roto i nga tukinga hei aukati i te tuhirua.

3.6 Aroturuki Waka 24H

The dash cam can record 24/7 in Parking Mode with delayed recording. Tuhipoka: This feature requires a dedicated hardwire kit (not included in the package). The hardwire kit connects to the car's fuse box and provides low voltage protection to prevent battery drain.

Figure 7: G-Sensor, Loop Recording, and Parking Monitor features.

3.7 Included 64GB SD Card

A free U3, Class 10 high-speed 64GB SD card is provided for immediate use. The dash cam supports up to 256GB SD cards.

4. Tatūnga me te Tāuta

4.1 Tāutanga o te Kāmera Papaaho o Mua

1. Horoia te matapihi o mua e hiahia ana koe ki te whakanoho i te kāmera papaaho.
2. Attach the suction mount to the dash cam and then firmly press it onto the windshield, ensuring a secure grip.
3. Whakatikatikahia te koki o te kāmera kia mārama ai view o te huarahi kei mua.
4. Route the power cable from the dash cam to your car's cigarette lighter socket. Use the provided crowbar and cable clips to neatly tuck away the cable along the windshield trim and dashboard.

4.2 Whakamutunga Kaamera Whakamuri

The waterproof rear camera can be installed either inside or outside the vehicle. For external installation, it is recommended to seek professional assistance.

1. Kōwhiria he wāhi tika mō te kāmera o muri, i runga ake i te pereti raihana, i roto rānei i te matapihi o muri.
2. Connect the rear camera to the main dash cam unit using the provided 6-meter extension cable.
3. Route the rear camera cable neatly to the front unit, utilizing the crowbar and cable clips for a clean installation.

Figure 8: Dash cam installed on a car windshield.

5. Nga Tohutohu Whakahaere

5.1 Mahi Taketake

• Hiko Whakaka/Weto: The dash cam will automatically power on and begin recording when connected to the car's power supply and the engine starts. It will power off shortly after the engine is turned off.
• Te tuhi: Once powered on, the dash cam automatically starts continuous loop recording.
• Whakaatu Mata: The 2.0-inch IPS screen displays the live view from the cameras and menu options.

5.2 App Control (Viidure App)

The Viidure app allows for convenient control and management of your dash cam via Wi-Fi.

1. Tikiake i te Taupānga: Download and open the "Viidure" application from your smartphone's app store.
2. Turn on Dash Cam Wi-Fi: Turn on the car camera.
3. Tūhono ki Wi-Fi: Go to your phone's Wi-Fi settings and connect to the dash cam's Wi-Fi network (e.g., A12x-xxx). The default password is 12345678. (Ensure VPN, Bluetooth, and cellular data are turned off if connection issues occur).
4. Ngā Āhuatanga Whakauru: Once connected, you can use the app for:
   • Ora View: Rere atu i te kai i te wā tūturutage mai i ngā kāmera e rua.
   • Playback and Download: Te uru me te review tuhia footage without removing the SD card. Download important clips to your phone.
   • Tautuhinga Whirihoranga: Adjust various settings such as resolution, recording modes, and sensitivity.
   • Whakahōu Firmware: Update the dash cam's firmware directly through the app.

Important Notes for Wi-Fi Connection:

• The Wi-Fi app operates over short distances (within 10 meters without obstructions). Remote monitoring is not possible.
• When connected to the dash cam via a point-to-point connection, your phone will temporarily lose internet access.
• In the latest Viidure app version, the dash cam will automatically resume recording after you exit the Wi-Fi app.
• Your phone must be disconnected from CarPlay/Android Auto when using the Viidure app.

5.3 Roopu Hopu

The dash cam continuously records video in segments. When the memory card is full, the oldest unlocked files are automatically overwritten by new recordings. This ensures continuous operation without manual deletion of old footage.

5.4 G-Sensor (Pūoko Taumaha)

The built-in G-sensor detects sudden movements or impacts (e.g., collisions). When an event is detected, the current video segment is automatically locked and saved to a protected folder, preventing it from being overwritten by loop recording.

5.5 Aratau Waka 24-Hāora

To enable 24-hour parking monitoring, a dedicated hardwire kit is required (sold separately). This kit connects the dash cam directly to your car's fuse box, allowing it to record even when the vehicle is parked and the ignition is off. The hardwire kit typically includes low voltage protection to prevent draining your car battery.

6. Tiaki

6.1 Te Whakahōputu Kāri SD

For optimal performance, the SD card should be formatted regularly. When inserting a new SD card for the first time, it must be formatted on the app. If you encounter issues formatting via the app, format it to FAT32 on your computer first, then try formatting it again using the app.

Recommended SD Card: Use a Class 10, U3 or higher speed Micro SD card from a reputable brand (32GB-256GB).

6.2 Awhe Pawera

The dash cam is designed to operate within a wide temperature range, from -22°F (-30°C) to 176°F (80°C), extending its usage and reliability in various climates.

Figure 9: Dash cam operating temperature range.

7. Te Raru

This section addresses common issues and their solutions.

Q1: How does the parking mode work if the power switches off with the ignition?

A1: A dedicated hardwire kit is required (not included) to connect the car's fuse box. If you wish to implement this feature, you may purchase the hardwire kit separately or contact customer support for assistance.

Q2: Dashcam APP can't connect to WiFi? Why can't I watch the live video on the APP?

A2: Ensure to grant permissions for photo album access, location, WiFi, and cellular data when opening the app. Disable VPN, Bluetooth, cellular data, security software, and antivirus apps on your phone. Also, disconnect from CarPlay/Android Auto as they cannot be used simultaneously with the app.

Q3: How to format the SD card?

A3: You can connect to the APP via the dashcam's WiFi, enter the APP, select camera settings, then click format. Alternatively, format the memory card on your computer first, and then format it again using the app.

Q4: Does the car battery run out if the dash cam light stays on after parking or my vehicle has a permanent live cigar socket?

A4: Yes, if the dash cam light remains on after parking, it can drain the car battery over time. If your cigarette socket is permanently powered, you must unplug the dash cam. Alternatively, installing a dedicated wiring kit enables 24-hour parking monitoring with low voltage protection, preventing battery drain by automatically disconnecting when low voltage is detected. Contact customer support if you need assistance with this requirement.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

ORSKEY offers a 1-year warranty for this product, with replacement available within 30 days of purchase. Our customer support team is available 24/7 to assist you with any questions or issues. Please feel free to contact us via email for any assistance.

If the included charging cable is not long enough for your vehicle's setup, please contact customer support to request an extended charging cable.