1. Nga korero haumaru
Please read all instructions carefully before using the Energizer 1200SL-R Flashlight. Retain this manual for future reference.
- Haumaru kanohi: Do not look directly into the LED light. The intense light output can cause temporary vision impairment or permanent eye damage.
- Whakatūpato wera: The flashlight body may become warm during extended use, especially in High or Boost modes. Exercise caution to avoid skin contact with hot surfaces.
- Haumaru Pūhiko: This product contains an integrated Lithium-Ion battery. Do not attempt to disassemble, puncture, or expose the battery to extreme temperatures or fire. Dispose of the product according to local regulations.
- Tamariki: Kaua e toro atu ki nga tamariki. Ehara tenei i te taakaro.
- Ātete wai: The flashlight is rated IPX4 water-resistant, meaning it is protected against splashing water from any direction. It is not designed for submersion.
2. Hua Neke Atuview
The Energizer 1200SL-R is a compact, rechargeable LED flashlight designed for everyday carry (EDC) and tactical use. It features a flat, lightweight design for comfortable handling and storage.
Āhuatanga matua:
- Tirohanga Teitei: Up to 1200 lumens in Boost mode.
- Hanga Roa: Made from aircraft-grade aluminum with a shatterproof lens.
- Hoahoa Whanui: Includes a built-in clip for secure attachment and a magnet for hands-free use on metallic surfaces.
- Aratau Maama Maha: Eight distinct modes for various lighting needs.
- Ka taea te utu: Integrated Lithium-Ion battery with USB-C charging.

Figure 2.1: The Energizer 1200SL-R Flashlight in use, highlighting its slim design and powerful illumination.

Whakaatu 2.2: Taipitopito view of the flashlight, illustrating its durable construction and convenient features such as the clip and magnet.
3. Tatūnga
Whakataunga Tuatahi:
Before first use, fully charge the flashlight. The Energizer 1200SL-R comes with an integrated Lithium-Ion battery.
- Kimihia te tauranga utu USB-C i te taha o te rama.
- Honoa te taura utu USB-C kua whakaratohia ki te tauranga o te rama.
- Honoa te pito kē atu o te taura USB-C ki tētahi pūtake hiko USB hototahi (hei tauira, te urutau pakitara, te tauranga USB rorohiko).
- The charging indicator light will illuminate to show charging status. Refer to the indicator light guide for specific details (typically red for charging, green for fully charged).
- Charging typically takes several hours for a full charge.

Figure 3.1: The flashlight and its USB-C charging cable, ready for initial setup.
4. Nga Tohutohu Whakahaere
The flashlight features two distinct push buttons for controlling the Area (flood) and Spot (throw) beams, along with special modes.
Te Hia/Weto me te Kōwhiringa Aratau:
- Area Beam (Flood): Press the button with the wider beam icon once to turn on the Area beam. Subsequent presses will cycle through Low, Medium, and High settings. Press again to turn off.
- Spot Beam (Throw): Press the button with the narrower beam icon once to turn on the Spot beam. Subsequent presses will cycle through Low, Medium, and High settings. Press again to turn off.
- Aratau Whakanuia: To activate Boost mode (1200 lumens), long-press either button. This mode provides maximum brightness for approximately 40 seconds, after which it will revert to the previously selected mode to prevent overheating.
- Aratau Strobe: To activate Strobe mode, double-click either button. Double-click again or press once to turn off.
- Whakamahi Waatahi: The Area and Spot beams operate independently. Activating one will not automatically turn off the other, unless Boost mode is engaged, which uses both LEDs at full power.

Figure 4.1: The flashlight's powerful illumination, reaching up to 100 meters.
5. Tiaki
Te horoi:
To clean the flashlight, wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or lens.
Te Whakataki Tikanga Pai:
- Charge the flashlight regularly, even if not in frequent use, to maintain battery health.
- A ape i te tino whakamakuku i te pākahiko i mua i te whakakii.
- Use only the provided USB-C cable or a certified equivalent.
Rokiroki:
Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
6. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kare te rama e ka ana. | Kua pau te pākahiko. | Recharge the flashlight using the USB-C cable. |
| Ko te marama he atarua, he korikori ranei. | Te utu iti o te papahiko. | Whakaorangia te rama rama. |
| Flashlight becomes very hot. | Prolonged use in High or Boost mode. | Reduce the light mode intensity or turn off the flashlight to allow it to cool down. |
| Karekau te rama e utu ana. | He taura, he puna hiko ranei. | Check the USB-C cable and try a different power adapter or USB port. |
7. Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Tau tauira | 1200SL-R |
| Puna Maama | LED |
| Tirohanga | Up to 1200 Lumens (Boost Mode) |
| Tawhiti Kurupae | Tae atu ki te 100 mita |
| Wā whakahaere | Up to 20 hours (on lower settings) |
| Momo Pūhiko | Lithium-Ion honohono |
| Tauranga Whakatau | USB-C |
| Rauemi | Miihini-Tohu Konumohe |
| Ātete wai | IPX4 (Ātete ki te Pāhū) |
| Whakataka Atete | 1 mita |
| Ahu (L x W x H) | 17.5 x 5.5 x 2.5 cm (whakatata) |
| Taumaha | 0.13 kg (tata) |

Figure 7.1: The flashlight demonstrating its long run time and magnetic attachment.
8. Pūtāhui me te Tautoko
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Energizer webpae. Ka kitea e koe ētahi atu kōrero i te Energizer Store.