KERUI Water Leak Detector

KERUI 2.4GHz WiFi Water Leak Detector Instruction Manual

Model: Water Leak Detector

Waitohu: KERUI

1. Kupu Whakataki

This manual provides detailed instructions for the installation, operation, and maintenance of your KERUI 2.4GHz WiFi Water Leak Detector. Please read this manual thoroughly before using the device to ensure proper function and safety. This device is designed to detect water leaks and water levels, providing real-time alerts to help protect your home from water damage.

2. Hua Neke Atuview

Mua view of the KERUI Water Leak Detector, a compact white square device with a speaker grille and LED indicators.

Whakaahua 2.1: The KERUI Water Leak Detector main unit.

2.1 Nga waahanga matua

  • 3-in-1 Advanced Functionality: Equipped with a top sensor, two bottom sensors, and an extra-long detachable detection cable (105cm) for comprehensive water leak and water level detection. Easily switch between modes by connecting or disconnecting the cable.
  • Whakamōhiotanga wā-tūturu: Connects to 2.4GHz WiFi to send instant alerts and notifications to your smartphone via the Tuya Smart app when a leak is detected.
  • Pūoro Whakaoho 100dB: Emits a continuous 100dB audible alarm for 60 seconds upon detection, ensuring you are alerted even if not near your phone.
  • Hoahoa Kiato me te Huatau: Measuring approximately 65x65x28 mm, the detector is discreet and integrates seamlessly into any home environment.
  • IP67 Whakatauranga parewai: Durable IP67 waterproof casing and anti-rust coating ensure long-term use in humid environments.

2.2 Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i to kete:

  • KERUI Water Leak Detector
  • 105cm External Probe
  • Hook and Screws for mounting
  • Pukapuka Kaiwhakamahi
  • 4 Pūhiko AAA (kei roto)
The KERUI Water Leak Detector shown with its detachable 105cm external probe cable.

Whakaahua 2.2: The detector unit with its external detection cable.

3. Tatūnga

3.1 Tāuta Pūhiko

The device requires 4 AAA alkaline batteries. These are typically pre-installed. To activate, open the battery compartment and remove the protective film from the batteries. Ensure correct polarity when inserting or replacing batteries.

Image showing battery installation in the KERUI Water Leak Detector. The top-left panel illustrates inserting two AAA batteries into the compartment.

Whakaahua 3.1: Illustration of battery installation. Open the compartment, insert 4 AAA batteries, ensuring correct polarity.

3.2 Taupānga Tikiake me te Tauhoa

The KERUI Water Leak Detector operates with the Tuya Smart application. Ensure your smartphone is connected to a 2.4GHz Wi-Fi network before proceeding.

  1. Tikiake i te Taupānga: Scan the QR code provided in the manual or search for "Tuya Smart" in your smartphone's app store (Google Play Store for Android, Apple App Store for iOS).
  2. Rēhita/Takiuru: Open the Tuya Smart app and register a new account or log in with an existing one.
  3. Tāpiri Pūrere:
    • Ensure the detector is powered on (batteries installed and protective film removed).
    • I te taupānga Tuya Smart, patohia te ata "+" hei tāpiri i tētahi pūrere.
    • Select "Security & Sensor" then "Water Leak Detector (Wi-Fi)".
    • Follow the on-screen instructions to connect the device to your 2.4GHz Wi-Fi network. This usually involves pressing a button on the detector to enter pairing mode.
    • Once connected, you can rename the device for easier identification (e.g., "Kitchen Leak Sensor").
Image showing QR code for Tuya Smart app download and Wi-Fi pairing steps. The top-right panel shows a QR code, and the bottom-left panel shows a smartphone connected to a Wi-Fi router with the detector.

Whakaahua 3.2: Steps for app download and Wi-Fi pairing. Scan the QR code to download the Tuya Smart app, then follow in-app instructions to connect to your 2.4GHz Wi-Fi network.

Download the Tuya Smart App: https://smartapp.tuya.com/tuyasmart

4. Mahi

4.1 Aratau Rapu

The detector offers three detection methods:

  • Water Leak Detection (Default): The two probes on the back of the alarm detect water. When water bridges these probes, the alarm triggers.
  • Drip Detection: A probe on the front of the alarm is designed to detect small drips. Place it directly under a potential drip source.
  • Aroturuki Taumata Wai: Use the included 105cm external detection cable with two probes to monitor specific water levels. Connect the cable to the detector to activate this mode.
Image illustrating three usage options: hanging configuration with external cable, ground placement with back sensors, and ground placement with front sensor for drips.

Whakaahua 4.1: Three usage options for the water immersion alarm. This includes hanging the external probe, placing the unit on the ground to detect leaks from the back sensors, or placing it to detect drips from the front sensor.

4.2 Taumahi Whakaoho

When water is detected by any of the sensors, the device will:

  • Emit a loud 100dB audible alarm for 60 seconds.
  • Send instant notifications to your smartphone via the Tuya Smart app.
Image showing a house layout with the water leak detector emitting a 100dB alarm, indicating it's loud enough to be heard throughout the house.

Whakaahua 4.2: The 100dB alarm is designed to be heard across your home, providing immediate awareness of a water event.

4.3 App Notifications and Remote Monitoring

The Tuya Smart app allows for remote monitoring and management:

  • Receive real-time push notifications on your phone when a leak is detected, even when you are away from home.
  • View the history and timestamps of all alarm events within the app.
  • Share device access with multiple users (family members) through the app.
  • App notifications are free. Optional phone call and SMS notifications may incur charges (refer to Tuya app for details).
Image showing a house with multiple users (family members) receiving alerts on their smartphones and laptops from the water leak detector via the Tuya Smart app.

Whakaahua 4.3: Remote monitoring and multi-user sharing capabilities through the Tuya Smart app, allowing multiple family members to receive alerts.

Image displaying various smartphone screens showing Tuya Smart app notifications for water leaks, emphasizing that app alerts are free.

Whakaahua 4.4: Example of real-time water leak notifications received through the Tuya Smart app.

5. Te Whakanoho me te Whakanoho

The compact design and IP67 rating allow for flexible placement in various locations prone to water leaks.

  • Recommended Locations: Near water-containing appliances such as dishwashers, washing machines, water heaters, under sinks, in bathrooms, kitchens, basements, laundry rooms, and near sump pumps.
  • Kōwhiringa Whakapuru:
    • Turanga Papa: Simply place the detector on the floor in areas where leaks are likely to occur. Use the back sensors for general leak detection or the front sensor for drip detection.
    • Wall Mounting/Hanging: Utilize the included hook and screws to mount the detector on a wall. The 105cm external probe can then be extended to the desired detection point, such as inside a cabinet under a sink.
  • Naming Devices: Use the Tuya Smart app to name each detector and specify its location (e.g., "Basement Water Heater," "Kitchen Sink") for clear identification of alarm sources.
Image showing various suitable locations for the water leak detector, including bathroom, laundry room, kitchen, fish tank, and swimming pool area.

Whakaahua 5.1: Examples of suitable locations for installing the KERUI Water Leak Detector.

6. Tiaki

  • Whakakapinga Pūhiko: The app will notify you when battery levels are low. Replace all 4 AAA batteries promptly to ensure continuous protection. Always use new alkaline batteries.
  • Horoi Sensor: Periodically inspect the detection probes for any dirt, dust, or corrosion. Clean them gently with a soft, dry cloth to ensure optimal sensitivity.
  • Whakahōu Firmware: Check the Tuya Smart app regularly for any available firmware updates for your device. Updates can improve performance and add new features.
  • Nga Tikanga Taiao: While the device is IP67 rated, avoid prolonged submersion or exposure to extreme temperatures outside its operating range.

7. Te Raru

Raruraru Take pea Rongoā
Kaore te taputapu i te hiko. Kua mate nga pākahiko, kua he ranei te whakaurunga. Ensure batteries are inserted with correct polarity. Replace with new AAA alkaline batteries.
Kāore he whakamōhiotanga taupānga i tae mai.
  • Device not connected to Wi-Fi.
  • Phone notifications are disabled for the Tuya Smart app.
  • Tohu Wi-Fi ngoikore.
  • Verify Wi-Fi connection in the app. Re-pair if necessary.
  • Enable notifications for the Tuya Smart app in your phone's settings.
  • Move the detector closer to your Wi-Fi router or use a Wi-Fi extender.
Device does not detect water.
  • Sensors are dirty or obstructed.
  • Water level is too low to reach sensors.
  • External probe not properly connected (if using).
  • Clean the sensor probes.
  • Adjust placement to ensure water can reach the sensors.
  • Ensure the external probe is securely plugged into the detector.
Audible alarm is too quiet or not sounding.
  • He iti te pākahiko.
  • Te aukati i te kaikorero.
  • Whakakapihia nga pākahiko.
  • Ensure the speaker grille is not blocked.
Cannot connect to 2.4GHz Wi-Fi.
  • Router is 5GHz only or dual-band with combined SSID.
  • Kupuhipa Wi-Fi hē.
  • Ensure your router has a 2.4GHz network enabled. If it's a combined SSID, try separating the 2.4GHz and 5GHz networks in your router settings.
  • Takiruatia te kupuhipa Wi-Fi.

8. Whakatakotoranga

Āhuahira Taipitopito
Waitohu KERUI
Tauira Kaipupuri Riki Wai
Hononga 2.4GHz Wi-Fi
Puna Mana 4 x AAA Patuhi Alkaline
Taumata oro 100 dB
Tikanga Mana Tuya Smart Application
Ahu (L x W x H) 8 x 2.5 x 8 cm (approx. 65x65x28 mm for the main unit)
Taumaha 44 karamu
Whakatauranga parewai IP67
Te Roa o te Pūtirotiro o Waho 105 cm
Max Range (Wireless) 20 Meters (approximate, depends on environment)
Hangarau Hoko Whakapā Pūoko

9. Nga korero haumaru

  • Tiakina te taputapu kia kore e taea e nga tamariki me nga kararehe.
  • Kaua e ngana ki te wetewete, ki te whakatika ranei i te taputapu. Ma tenei ka whakakorehia te whakamana ka pa he kino.
  • Makahia ngā pākahiko kua whakamahia kia rite ki ngā ture ā-rohe. Kaua e maka ngā pākahiko ki te ahi.
  • Ensure the device is placed on a stable surface or securely mounted to prevent accidental falls.
  • This device is designed to detect water leaks and levels. It is not a substitute for proper plumbing maintenance or flood prevention measures.

10. Pūtāhui me te Tautoko

For any questions, suggestions, or technical support regarding your KERUI Water Leak Detector, please contact KERUI customer service. Refer to the product packaging or the official KERUI webpae mo nga korero whakapā.

Information regarding specific warranty periods or repair services is not available in this manual. Please retain your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.