Kia oraview Byte Tango BT10 Wireless 10-inch Monitor 1080P Rear View Mirror Dashcam Backup Camera System User Manual

1. Kupu Whakataki

Thank you for choosing the Haloview Byte Tango BT10 Wireless Rear View Mirror Dashcam Backup Camera System. This system provides comprehensive front and rear vehicle coverage with a 10-inch 1080P monitor, a built-in dashcam, and a wireless backup camera. This manual will guide you through the installation, operation, and maintenance of your new system to ensure optimal performance and safety.

2. Hua Neke Atuview

2.1 Ihirangi mokete

Te Haloview Byte Tango BT10 system includes the following components:

• 1 x BT10 Monitor (10-inch, 1280x320 resolution)
• 1 x Rear Camera BTC128W (with WDR Technology)
• 1 x Puka
• Nga here rapa
• Micro-SD / TF Card
• Type-C to DC Power Cable
• Kāmera Hurihuri Tauira
• Power Adapter for Pre-wired RV
• Tauira Tauira
• Hikareti Maama Hikohiko
• Ko nga whitiki Velcro
• Pukapuka Kaiwhakamahi

Figure 2.1: Included components of the Haloview BT10 system.

2.2 Nga waahanga matua

• 10-inch IPS Touchscreen Monitor: Provides a clear and intuitive interface for viewing and controlling the system.
• Built-in 1080P Dashcam: Captures forward-facing video with a 140° wide-angle lens.
• Wireless 1080P Backup Camera (BTC128W): Offers a 135° rear view, eliminating blind spots and aiding in safe reversing.
• Wide Dynamic Range (WDR) Technology: Improves image quality by balancing light and dark contrasts, especially useful in challenging lighting conditions.
• Kāmera Ārai Wai IP69K: Ensures durability and reliable performance in various weather conditions.
• Kōwhiringa Hiko Hangarau: Can be powered via cigarette lighter socket or Type-C port (PD protocol required).

Figure 2.2: Haloview BT10 system with wide-angle views.

3. Tatūnga & Tāuta

3.1 Tirohanga i mua i te whakaurunga

Before installing the system, please ensure the stability of your vehicle's rearview mirror. If the rearview mirror or its bracket is loose, it is recommended to replace or tighten it first. An unstable mirror may cause the streaming display to shake or fail to stay in position while driving.

3.2 Aroturuki Tāuta

1. Attach the BT10 monitor to your existing rearview mirror using the provided rubber straps. Ensure it is securely fastened and centered for optimal viewing.
2. Adjust the monitor's angle to provide a clear view of the road ahead and the display.

Figure 3.1: Monitor and dashcam installation.

3.3 Wireless Rear Camera Installation (BTC128W)

1. Choose a suitable location at the rear of your vehicle for the BTC128W camera, ensuring a clear line of sight and optimal viewkoki.
2. Whakanuia te kamera ma te whakamahi i nga taputapu kua whakaratohia.
3. Connect the camera to a power source (e.g., reverse light power for automatic activation when reversing, or constant power for continuous monitoring).

Figure 3.2: Wireless rear camera installation on an RV.

3.4 Hononga Hiko

The BT10 monitor offers flexible power options:

• Putunga Mama Hikareti: Use the provided cigarette lighter power adapter to plug into your vehicle's 12V accessory socket.
• Momo-C Port: Connect a Type-C cable to the monitor's Type-C port. Note that a Power Delivery (PD) protocol compatible power source is required for this option.

Figure 3.3: Flexible power options for the monitor.

4. Nga Tohutohu Whakahaere

4.1 Mahi Taketake

• Hiko Whakaka/Weto: The system will typically power on automatically when the vehicle starts and power off when the vehicle is turned off. A manual power button may also be available on the monitor.
• Atanga Mata Paa: Navigate through menus and settings by tapping and swiping on the 10-inch IPS touchscreen.
• Aratau Whakaatu: The monitor can display the front dashcam view, kamera muri view, or a split-screen view of both. Switch between modes via the touchscreen interface.

4.2 Dashcam Features

• Te tuhi Tonu: The built-in 1080P dashcam continuously records footage of the road ahead (140° wide-angle). Footage is stored on the Micro-SD card.
• Roopu Hopu: When the Micro-SD card is full, the oldest fileKa tuhirua aunoatia a s.
• Te hopu ohorere: In the event of a sudden impact or collision, the G-sensor will trigger emergency recording, locking the current footage hei ārai i te tuhirua.
• Hopu Tere: Tap the "REC" icon on the screen to manually capture a snapshot or start/stop recording.

Figure 4.1: Quick capture function on the monitor.

4.3 Backup Camera Features

• Whakahohenga Aunoa: If wired to the reverse lights, the rear camera view will automatically display when the vehicle is put into reverse.
• Awhe Hiringa Whānui (WDR): The BTC128W camera features WDR technology, which enhances image clarity in high-contrast lighting conditions, such as bright sunlight and deep shadows, or at night.
• Full-Color Dim-Light Night Vision: Provides clear, full-color images even in low-light environments.

Figure 4.2: Wide Dynamic Range (WDR) technology comparison.

4.4 Parking Line Adjustment

The parking guidelines displayed on the monitor can be adjusted to match your vehicle's dimensions and preferences:

• Whakatikatika Whakapae: Slide left/right on the touchscreen to adjust the parking lines horizontally.
• Whakatikatika Poutū: Slide up/down on the touchscreen to adjust the parking lines vertically.

Figure 4.3: Adjusting parking lines on the display.

5. Tiaki

• Te horoi i te Aroturuki: Whakamahia he kakahu ngohengohe, maroke hei horoi i te mata o te mata. Mō ngā paru uaua, me horoi mārire.ampen te kakahu ki te wai, ki te horoi mata-haumaru ranei. A ape i nga matū kino.
• Te horoi i te Arotahi Kamera: Gently wipe the camera lens with a soft, lint-free cloth to ensure clear image quality.
• Whakahaere Kāri Micro-SD: Regularly format the Micro-SD card (at least once a month) to maintain optimal recording performance and prevent data corruption. Back up important footage i mua i te whakahōputu.
• Whakahōu Firmware: Check the Haloview rangatira website periodically for any available firmware updates for your BT10 system. Follow the instructions provided with the update carefully.

6. Te Raru

6.1 Nga take me nga otinga noa

• No Power to Monitor:
  • Check if the power cable is securely connected to both the monitor and the power source (cigarette lighter or Type-C port).
  • Me whakarite kei te mahi te putanga hiko o te waka.
  • If using Type-C, confirm the power source supports Power Delivery (PD) protocol.
• No Signal from Rear Camera:
  • Verify the rear camera is receiving power.
  • Ensure the camera and monitor are paired. Refer to the pairing instructions in the full user manual if re-pairing is needed.
  • Tirohia mo nga arai i waenga i te kamera me te aroturuki ka raru pea te tohu ahokore.
• Kounga Atahanga Kino:
  • Clean the camera lens and monitor screen.
  • Me whakarite kei te mau te kāmera, ā, kāore e wiri.
  • Check for strong electromagnetic interference sources near the camera or monitor.
• Dashcam Not Recording:
  • Ensure a Micro-SD card is inserted correctly.
  • Whakahōputuhia te kāri Micro-SD.
  • Check if the recording function is enabled in the monitor's settings.

7. Whakatakotoranga

8. Nga Korero Whakaputanga

Te Haloview Byte Tango BT10 system comes with a 1 Tau Kaihanga Rarangi. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty card included in your package or visit the official Haloview webpae.

9. Support & Contact Information

If you encounter any issues or have questions regarding your Haloview Byte Tango BT10 system that are not covered in this manual, please contact Haloview customer support. You can typically find contact information (email, phone, or support portal) on the official Haloview webpae, i runga ranei i te kete o to hua.

Mō ngā rauemi tautoko hou rawa atu, tirohia: www.haloview.com