Surenoo SMC0430A-800480 Rangatū MCU Atanga TFT LCD Kōwae
Tauira No.
- SMC0430A-480272-RTP/CTP
- SMC0430A-800480-RTP/CTP (IPS)
- SMC0500A-800480-RTP/CTP
- SMC0700A-800480-RTP/CTP
Tawhā Hua
| Tauira No. | Rahi Tauira | Whakatau | Momo Whakaatu | Rahi PCB | Rohe Hohe | ||
| SMC0430A-480272 | 4.3” | 480*272 | TN | 120.00*74.00 | 95.04*53.86 | ||
| SMC0430A-800480 | 4.3” | 800*480 | IPS | 120.00*74.00 | 95.04*53.86 | ||
| SMC0500A-800480 | 5.0” | 800*480 | TN | 133.50*84.00 | 108.00*64.80 | ||
| SMC0700A-800480 | 7.0” | 800*480 | TN | 181.00*108.00 | 154.08*85.92 | ||
| Whakaatu Tae | RGB 65K tae | ||||||
| Kaiwhakahaere | SSD1963 | ||||||
| Atanga Kōwae | 16Moka Atanga Whakarara | ||||||
| Te Waahi Mahi | -10℃~60℃ | ||||||
| Paemahana Rokiroki | -20℃~70℃ | ||||||
| Mahinga Mahi Voltage | 4.3”: 2.8-3.3V | 5.0”: 2.8-3.3V | 7.0”: 5.0V | ||||
| IO Voltage | 3.3V | ||||||
Whakaahuatanga Atanga
Panui:
A. Ko te "T_" he titi e pa ana ki te mata pa parenga;
B. Ko te "SD_" he titi hono o te kaari SD;
C. Ko te "F_" he titi hono o te SPI FLASH;
D. "NC_" Ko te titi e pā ana o te mata pa capacitive;
E. Ko te toenga he titi hono o te mata LCD;
F. Ko te SPI FLASH karekau i te soldered, tena koa whakapiri mai ki a koe mena ka hiahia koe.
| Kao. | Pin ICON | Whakaahuatanga Pin |
| 1 | GND | Kōwae Power Ground Pin |
| 2 | 3.3V/EX_3.3V | SMC0430A/SMC0500A: 3.3V; SMC0700A: NC / 3.3V. |
| 3 | NC | Undefined, reserved |
| 4 | RS | Rehita LCD / titi mana whiriwhiri raraunga (taumata teitei: rehita, taumata iti: raraunga) |
| 5 | WR | LCD tuhi titi mana |
| 6 | RD | LCD panui titi mana |
| 7-14 | DB8-DB15 | Pahi raraunga LCD teitei 8-bit titi |
| 15 | CS | Ko te titi mana tautuhi LCD (whakahohe taumata iti) |
| 16 | F_CS | SPI FLASH maramara whiriwhiri titi (whakahohe taumata iti |
| 17 | WHAKATANGA | titi mana tautuhi LCD (taumata iti) |
| 18 | NC/5.0V | SMC0430A/SMC0500A: NC; SMC0700A: 5.0V. |
| 19 | LED_A | Te Pin Mana Whakamuri LED (Mena e hiahia ana koe, ka taea te hono atu) |
| 20 | NC/INT | RTP: Kare i tautuhia, kua rahuitia / CTP: titi whakamotitia |
| 21~28 | DB0~DB7 | Pahi raraunga LCD iti 8-bit titi |
| 29 | T_CLK | RTP: Paewhiri Paa SPI te titi mana karaka pahi |
| 30 | T_CS | RTP: Ko te maramara IC mata pa ki te kowhiri i te titi mana (Ka taea te taumata iti) |
| 31 | T_DIN | RTP: Pae Paa SPI pahi tuhi titi raraunga |
| 32 | NC/CRT | RTP: Kaore i tautuhia, kua rahuitia /CTP: Tautuhi ano i te titi mana (taumata iti) |
| 33 | T_DO | RTP: Pae Paa SPI pahi panui te titi raraunga |
| 34 | T_IRQ | RTP: titi rapu haukoti (Whakahohe taumata iti) |
| 35 | SD_DO | SD: SDIO pahi panui titi raraunga |
| 36 | SD_CLK | SD: SDIO pahi mana karaka titi |
| 37 | SD_DIN | SD: SDIO pahi tuhi titi raraunga |
| 38 | SD_CS | SD: Ko te kongakonga SD ka kowhiri i te titi mana (Whakahohe taumata iti) |
| 39 | NC/SDA | RTP: Kaore i tautuhia, kua rahuitia / CTP: IIC bus data control Pin |
| 40 | NC/SCL | RTP: Kaore i tautuhia, kua rahuitia / CTP: IIC pahi whakahaere karaka Pin |
Nga tohutohu waea waea
| LCD Pin
(RTP) |
SMC0430A/SMC0500A | SMC0700A | ||
| STM32F103RCT6 | STM32F407VET6 | STM32F103RCT6 | STM32F407VET6 | |
| 3.3V/5.0V | 3.3V | 3.3V | 5.0V | 5.0V |
| GND | GND | GND | GND | GND |
| DB0-DB1 |
PB0~PB15 |
PD14-PD15 |
PB0~PB15 |
PD14-PD15 |
| DB2-DB3 | PD0- PD1 | PD0- PD1 | ||
| DB4-DB12 | PE7- PE15 | PE7- PE15 | ||
| DB13-DB15 | PD8- PD10 | PD8- PD10 | ||
| WR | PC7 | PD5 | PC7 | PD5 |
| RD | PC6 | PD4 | PC6 | PD4 |
| RS | PC8 | PD11 | PC8 | PD11 |
| WHAKATANGA | PC4 | 复位引脚 | PC4 | 复位引脚 |
| CS | PC9 | PD7 | PC9 | PD7 |
| LED_A | PC10 | PB15 | PC10 | PB15 |
| T_IRQ | PC1 | PB1 | PC1 | PB1 |
| T_DIN | PC3 | PB2 | PC3 | PB2 |
| T_DO | PC2 | PC4 | PC2 | PC4 |
| T_CS | PC13 | PC13 | PC13 | PC13 |
| T_CLK | PC0 | PB0 | PC0 | PB0 |
Tuhipoka:
Mahinga Hiko o te Whakaatu
SMC0430A / SMC0500A: Me hono te 3.3V mana hiko ki te 2.8V ~ 3.3V, me te 5.0V kaore e taea te hono; SMC0700A: Me hono te mana hiko ki te 5.0V, ki te kore e marama te rama o muri;
E toru nga huarahi hei whakahaere i te rama whakamuri: ka mau tonu, SSD1963 PWM mana wherikotanga, me te mana titi. Ma te taunoa, ka whakamahia te mana titi. Me whakauru noa he taumata teitei ki runga i te titi LED_A kia taea ai te ara iahiko puku o muri, whakamarama te rama whakamuri, me te whakauru i te taumata iti hei whakaweto i te rama whakamuri. Ma te whakauru i te tohu PWM, ka taea te whakatika te kanapa o te rama.
I te mea ko te 200-400mA te kohi hiko o te hua i te wa e tino marama ana te rama tuara, kia mohio koe ki te whakamahi i te hiko hiko me te raina hiko hiko.
Tuhi Whakahuahua
Hoahoa o te LCD Module
Wāhanga B: SPEC mo TFT LCD Paewhiri
Whakatakotoranga Whānui
Ko te 043JGI50 he kōwae TFT-LCD. Kei te tito he papa TFT- LCD, taraiwa IC, FPC, he wae rama tuara. Kei roto i te 4.3 ′′ te horahanga whakaatu 800 x 480 pika ka taea te whakaatu ki te 16.7M tae. Ka rite tenei hua ki te paearu taiao RoHS.
|
Tūemi |
Ihirangi |
Waeine |
Tuhipoka |
|
Momo LCD |
Ko te tikanga he pango, he whakawhiti |
– |
|
|
Whakaatu te tae |
16.7M |
1 |
|
|
Viewi te Aronga |
KATOA |
Karaka |
|
| Te pāmahana whakahaere |
-20~+70 |
℃ |
|
|
Te pāmahana rokiroki |
-30~+80 |
℃ |
|
|
Rahinga kōwae |
105.50(W)×67.20(H)×3.00(T) |
mm |
|
|
ActiveArea |
95.04(W)×53.858(H) |
mm | |
|
Tuhinga o mua |
800×RGB×480 |
ira |
|
|
Whakamuri |
10-LED |
||
|
Whakawhiti Raraunga |
atanga RGB |
– |
- He paku rereke te rangi o te tae ma te pāmahana me te taraiwa voltage.
- Kore he FPC me te Solder.
Tuhi Whakahuahua
Whakatauranga Morahi Tino (Ta=25℃)
Whakatauranga Morahi Morahi Hiko.(Vss=0V ,Ta=25℃)
| Tawhā | Tohu | Min | Pato | Max | Waeine | Tuhipoka |
|
Tuku hiko |
VDD | -0.3 | – | 3.96 | V | |
| AVDD | -0.5 | – | 14.85 | V | ||
| VGL |
– |
-10.5 |
– |
V | ||
| VGH | – | 13 | – | V | ||
| Te Waahi Mahi | RUNGA | -20 | – | 70 | °C | |
| Paemahana Rokiroki | TST | -30 | – | 80 | °C |
- Mēnā kei runga ake te kōwae i ēnei whakawākanga mōrahi tino. Ka pakaru tonu pea. Ko te whakamahi i te kōwae i roto i nga ahuatanga hiko e whai ake nei ka nui ake, ka hee te mahi o te kōwae, ka kino te pono.
- VDD>VSS me mau tonu.
- Me mohio kei te noho nga kaiwhakamahi i te wa e tukuna ana te LCD Module.
Taiao Whakatauranga Morahi Tino.
|
Tūemi |
Rokiroki |
Te whakahaere |
Tuhipoka |
||
| MIN. | MAX | MIN. | MAX | ||
| Te Paemahana Ambient | -30℃ | 80℃ | -20℃ | 70℃ | 1,2 |
|
Te haumākū |
– |
– |
– |
– |
3 |
- Ka iti ake te wa whakautu ka whakahaerea i te pāmahana iti.
- He paku rereke te tae o te papamuri i runga i te pāmahana ambient.
Ka hoki whakamuri te ahuatanga. - Ta<=40℃:85%RH MAX.
Ta>=40℃:Me iti iho te haumākū pūmau i te haumākū o 85%RH i te 40℃.
Nga Whakatakotoranga Hiko me nga ahuatanga o te waa
Nga ahuatanga hiko(Vss=0V ,Ta=25℃)
| Tawhā | Tohu | Tikanga | Min | Pato | Max | Waeine | Tuhipoka | |
| Tuku hiko | VDD | Ta=25℃ | 2.8 | 3.3 | 3.6 | V | ||
|
Whakauru voltage |
'H' |
VIH |
VDD=3.3V |
0.7VDD |
– |
VDD |
V |
|
| 'L' | VIL | VDD=3.3V | 0 | – | 0.3VDD | V | ||
|
Kohi o naianei |
ICC1 | Aratau noa | – | – | – | mA | 2 | |
|
ICC2 |
Aratau moe |
– |
0.03 |
0.09 |
mA |
2 |
||
Tuhipoka:
- I te wa e whiwhi ai he rereke tino pai i roto i te aratau whakawhiti.
- I whakamatauria i roto i te tauira 1╳1chessboard.
Whakatakotoranga rama whakamuri (VSS=0V,Ta=25℃)
|
Tūemi |
Tohu |
Tikanga |
Min |
Pato |
Max |
Waeine |
Tuhipoka |
|
Tukunga Voltage |
– |
15 |
– |
V | |||
|
Te tuku o naianei |
If |
– |
– |
40 |
– |
MA |
Tuhipoka:
- VLED=VLED(+)-VLED(-).
- Ko te naianei o te LED he 20mA.
Ka tūtohuhia he puku LED i roto i te aratau o naianei tonu.
Nga tohu atanga
| Pin | Tohu | Whakaahuatanga. |
|
1 |
LED_K |
Papamuri LED Papa |
|
2 |
LED_A |
Maramarama LED Power |
|
3 |
GND |
GND |
|
4 |
VDD |
Tuku hiko |
|
5~12 |
R0-R7 |
pahi raraunga whero |
|
13~20 |
G0-G7 |
pahi raraunga matomato |
|
21~28 |
B0-B7 |
pahi raraunga puru |
|
29 |
GND |
GND |
|
30 |
PCLK |
Karaka Raraunga |
|
31 |
MAHI |
aratau tūtatari tīpako titi |
|
32 |
HSYNC |
Raina SYNC tohu |
|
33 |
VSYNC |
Tohu SYNC anga |
|
34 |
DE |
Raraunga Whakahohe Whakauru |
|
35 |
NC |
NC |
|
36 |
GND |
GND |
|
37 |
X1 |
Paa Pae Mana Pin |
|
38 |
Y1 |
Paa Pae Mana Pin |
|
39 |
X2 |
Paa Pae Mana Pin |
|
40 |
Y2 |
Paa Pae Mana Pin |
Ngā Āhuatanga Optical
| Tūemi | Tohu | Tikanga | Min. | Pato. | Max. | Waeine | Tuhipoka | |
| Tirohanga | Bp | θ=0°
F=0° |
– | 500 | – | Cd/m2 | 1 | |
| Whakariterite | ⊿Bp | 75 | 80 | – | % | 1,2 | ||
|
Viewing Koki |
3:00 |
Cr≥10 |
70 | 80 | – |
Tuhinga |
3 |
|
| 6:00 | 70 | 80 | – | |||||
| 9:00 | 70 | 80 | – | |||||
| 12:00 | 70 | 80 | – | |||||
| Whakataurite
ōwehenga |
Cr |
θ=0° F=0° |
1200 | |||||
| Wā Whakautu | Tr+Tf | 30 | 40 | ms | 5 | |||
|
Tae o CIE Whakariterite |
W |
x |
θ=0° F=0° |
– | 0.311 | – | – |
1,6 |
| y | – | 0.338 | – | – | ||||
| Y | – | – | – | – | ||||
|
R |
x | – | – | – | – | |||
| y | – | – | – | – | ||||
| Y | – | – | – | – | ||||
|
G |
x | – | – | – | – | |||
| y | – | – | – | |||||
| Y | – | – | – | – | ||||
|
B |
x | – | – | – | – | |||
| y | – | – | – | – | ||||
| Y | – | – | – | – | ||||
| NTSC
ōwehenga |
50 |
% | ||||||
Tuhipoka: Kua huri paku te tawhā i te pāmahana, te taraiwa voltage me nga taonga
Tuhipoka 1: Ka inehia nga raraunga i muri i te whakakā o nga LED mo te 5 meneti. Ka whakaatu a LCM i te ma katoa.
Ko te kanapa te uara toharite o nga waahi ine e 9. Taputapu ine PR-705 (Φ8mm)
Tikanga ine:
- Te ine i te taiao: Te ruma pouri.
- Te ine i te pāmahana: Ta=25℃.
- Whakaritea vol mahitage ki te tiki tino rerekee i waenganui o te whakaaturanga.
Ine uara ki te pito o waenganui o te panui LCD i muri i te neke atu i te 5 meneti i te wa e ka ana te rama tuara.
Tuhipoka 2: Ka tatauhia te riterite o te rama ma te whakamahi i te tauira e whai ake nei.
⊿Bp = Bp (Min.) / Bp (Max.)×100 (%)
Bp (Max.) = Te kanapa teitei i roto i nga waahi ine e 9
Bp (Min.) = Te kanapa iti i roto i nga waahi ine e 9.
Tuhipoka 3: Ko te whakamaramatanga o viewkoki ing:
Tirohia te kauwhata i raro nei e tohuhia ana e θ me Ф
Tuhipoka 4: Whakamaramatanga o te tauwehenga rereke.( Whakamatauhia te LCD ma te whakamahi i te DMS501)
Tuhipoka 5: Te Whakamaramatanga o te Wa Whakautu. (Whakamātauhia te LCD ma te whakamahi i te DMS501):
Ka inehia nga tohu whakaputa o te kaitahuri whakaahua ina huri nga tohu whakauru mai i te "pango" ki te "ma"(te wa hinga) mai i te "ma" ki te "pango" (te wa e piki ana). Ko te wa whakautu kua tautuhia ko te waahi wa i waenga i te 10% me te 90% o amplitudes.Refer to figure as below.
Tuhipoka 6: Whakamaramatanga o te Tae o te CIE Coordinate me te NTSC Ratio.
Tuhipoka 7: Te whakamaramatanga o te korero whakawhiti.
Tauwehenga korero whakawhiti(%)=|tauira A Tirohanga-tauira B Tirohanga|/tauira A Tirohanga*100
Tūemi Whakamātautau Pono me ngā Paearu
| Kao | Tūemi Whakamātautau | Te ahua whakamatautau | Paearu |
|
1 |
Rokiroki Maamaa Teitei |
80℃±2℃ 96H
Whakahokia te 2H ki te 25 ℃ Whakawetohia te hiko |
1. I muri i nga whakamatautau, kaua e pa mai nga koha o te whakapaipai me te hiko. 2. Kia kaua e neke ake i te rua o te uara tuatahi te paunga o naianei. |
|
2 |
Rokiroki Maamaa iti |
-30℃±2℃ 96H
Whakahokia te 2H ki te 25 ℃ Whakawetohia te hiko |
|
|
3 |
Te Mahi Whakamahana Nui |
70℃±2℃ 96H
Whakahokia te 2H ki te 25 ℃ Te hiko |
|
|
4 |
Te Mahi Whakamahana Iti |
-20℃±2℃ 96H
Whakahokia te 4H ki te 25 ℃ Te hiko |
|
| 5 | Te Teitei/Maamaku
Mahi |
60℃±2℃ 90%RH 96H
Te hiko |
|
| 6 | Huringa Huringa | –30℃←—————–→80℃
30min 5min 30min i muri i te huringa 5, Whakahokia te 2H ki te 25 ℃ Whakamutua te hiko |
|
| 7 |
Whakamatautau Whakawhiti |
10Hz~150Hz, 100m/s2, 120min |
Karekau e whakaaetia nga hapa whakapaipai me te hiko. |
| 8 |
Whakamatau Whakateke |
Ngaru haurua,300m/s2,11ms | |
|
9 |
Whakamātautau ESD |
Te rere o te hau: ± 8KV, Whakapā mai: ± 4KV |
Tuhipoka: Mahi: Whakarato 3.3V mo te punaha arorau.
Ko nga kupu tirotiro i muri i te whakamatautau pono, penei i raro nei
| ITEM | Te tirotiro |
| Whakataurite | CR>50% |
| IDD | IDD<200% |
| Tirohanga | Maama>60% |
| Tae Tae | Tae Tae+/-0,05 |
taumata kounga
Te whakarōpūtanga o nga hapa
Ko nga hapa nui (MA): Ko te koha nui e pa ana ki tetahi koha ka tino whakaheke i te whakamahinga mo nga tono hua, tae atu ki nga koha mahi katoa (penei i te kore whakaatu, whakaaturanga rereke, waahanga tuwhera, ngaro ranei, ara iahiko poto, waahanga ngaro), te ahua whakahuahua i tua atu. te tuhi, nga kohatanga haere tonu me era e pa ana ki te pono.
Nga hapa iti (MI): Ko te koha iti e pa ana ki te koha kaore e kiia ka kaha ki te whakaheke i te tono hua, he koha ranei e kotiti ke ana i nga paerewa o naianei tata kore e hono ana ki te whakamahi whai hua o te hua me tana mahi, penei i te pango. wahi, wahi ma, wahi kanapa, titi, raina pango, raina ma, rereke rereke, koha karaihe, koha polarizer, etc.
Te whakamaramatanga o te awhe tirotiro
Mo te koha ira o te TFT LCD kaore i te iti ake i te 3 inihi, ka wehewehe i nga waahi e toru hei whakatau (e ai ki te ahua 1).
A area : centre of viewrohe ing
Wāhi B : tahataha o viewrohe ing
Wāhanga C : Ki waho viewrohe ing
Mo etahi atu hapa, wehewehea nga wahanga e rua hei whakatau (e ai ki te ahua 2).
He rohe : Kei roto Viewrohe ing
Rohe B : Kei waho Viewrohe ing
X1(AA~VA): 2mm X2(AA~VA): 2mm Y1(AA~VA): 2mm Y2(AA~VA): 2mm
Ko nga taonga tirotiro me nga korero whanui
|
Nga korero whanui |
1. Mena ka pa mai etahi koha kaore i tohua i roto i tenei paerewa, ka whakatauhia etahi atu paerewa ma te whakaae tahi i waenga i te kaihoko me te SH.
2. ViewKo te waahi ko te waahi ka whakamanahia e SH. 3.Tepe sampMe noho i mua i tenei paerewa Tirotiro. 4.Viewme noho te whakatau i raro i te tauira tuturu. 5.Nga tikanga tirotiro Tawhiti tirohanga: 250 mm (mai i te sample) Te Mahana: 25±5 ºC Koki Tirotiro: 45 nga nekehanga i te ahunga 6 karaka (nga hapa katoa kei roto viewme noho te waahi i tirotirohia mai i tenei huarahi) |
|
|
Nga taonga tirotiro |
Te kohao, Te wahi kanapa, te wahi pango, te ma, te raina pango, te raina ma, te matūriki ke, te mirumiru |
He rereke te tae o te waahi iti ki te toenga. Kaore te ahuatanga e huri ki te voltage |
|
Te rereke rereke |
He rereke te tae o te waahi iti ki te toenga. Ka huri te ahuatanga ki te voltage | |
|
Polarizer koha |
Paraka, Paru, Matūriki, Mirumiru i runga polarizer ranei i waenganui i polarizer me te karaihe | |
| Te hapa ira (TFT LCD) | He kanapa, he pouri ranei te pika ina whakaatu | |
| Te hapa mahi | Karekau he whakaaturanga, Whakaaturanga rerekee, Tuwhera, kua ngaro ranei te waahanga, Porohita poto, He teka viewte aronga | |
| Kohaa karaihe | Kapiti karaehe, Koki heua o te karaihe, Karaihe tuwhene | |
| PCB hapa | Te hapa o te huinga huinga |
Te taumata Tirotiro Puta
|
Paerewa Tirotiro Putaatu |
Nga tikanga tirotiro |
Te tirotiro | ||||
| Min. | Max. | Waeine | IL | AQL | ||
| Nga hapa nui | Tirohia te 8.3 nga korero whanui | Tirohia te 8.5 | II | 0.065 | ||
|
Nga hapa iti |
Tirohia te 8.3 nga korero whanui |
Tirohia te 8.5 |
II |
0.065 |
||
| Tuhipoka:Sampling paerewa rite ki GB2828 | ||||||
Tuemi Tirotiro me nga Paearu
Nga Whakatupatotanga mo te Whakamahinga o nga Whakaaturanga LCD
Te Whakahaere Whakatupato
- He karaihe te papa whakaatu. Kaua e tukuna ki te wiri miihini ma te maka mai i te waahi teitei, aha atu.
- Mena kua pakaru te papa whakaatu ka pakaru te matū karaihe wai o roto, kia kaua e uru ki roto i to waha, mena ka pa te matū ki to kiri, ki to kakahu ranei, me horoi wawe ma te hopi me te wai.
- Kaua e whakapau kaha ki te mata maataki, ki nga waahi taapiri ranei na te mea ka rereke te tae o te tae.
- Ko te polarizer e hipoki ana i te mata whakaatu o te waahanga LCD he ngawari, he ngawari te rakuraku. Me ata whakahaere tenei polarizer.
- Mena kua poke te mata whakaatu, hau ki runga i te mata ka ata muru ki te kakahu maroke ngohengohe. Mena kaore i tino marama, whakamakuku i te kakahu ki tetahi o nga whakarewa e whai ake nei:
- waipiro Isopropyl
- Te waipiro Ethyl
Ko nga whakarewa i tua atu i era kua whakahuahia i runga ake nei ka pakaru te polarizer. Ina koa, kaua e whakamahi i nga mea e whai ake nei: - Wai
- Ketone
- Nga whakarewa kakara
- Kaua e ngana ki te wetewete i te LCD Module.
- Mena kua weto te hiko ara iahiko, kaua e whakamahia nga tohu whakauru.
- Hei aukati i te whakangaromanga o nga huānga e te hiko pateko, kia tupato ki te pupuri i te taiao mahi tino pai.
- Me tino whakamau te tinana i te wa e whakahaere ana i nga Whakaaturanga LCD.
- Ko nga taputapu e hiahiatia ana mo te huihuinga, penei i nga rino whakapiri, me tika te oneone.
- Hei whakaiti i te nui o te hiko pateko ka puta, kaua e whakahaere i nga huihuinga me etahi atu mahi i raro i nga tikanga maroke.
- Ko te LCD Module kua pania ki te kiriata hei tiaki i te mata whakaatu. Kia tupato ki te tihorea i tenei kiriata whakamarumaru i te mea ka puta mai he hiko pateko.
Whakatupato rokiroki
- I te wa e penapena ana i nga waahanga LCD, karohia te toronga ki te ra tika, ki te marama ranei o te korakora lamps.
- Me penapena nga waahanga LCD i raro i te awhe pāmahana rokiroki.
- Me penapena nga waahanga LCD ki roto i te ruma kaore he waikawa, he kawakore me te hau kino.
Ko nga tauira LCD kia kaua e hinga me te tino ohorere i te wa e kawe ana, me karo hoki i te pehi nui, te wai, te d.amp me te ra.
Tuhinga / Rauemi
 |
Surenoo SMC0430A-800480 Rangatū MCU Atanga TFT LCD Kōwae [pdf] Pukapuka Kaiwhakamahi SMC0430AA3-800480, SMC0430A-480272, SMC0430A-800480, SMC0500A-800480, SMC0700A-800480, SMC0430A-800480 Rangatū, SMC0430 Rangatū Atanga, LCD Atanga MMC800480 LCD Kōwae, TFT LCD Kōwae, LCD Kōwae, Kōwae |
