4D SYSTEMS gen4-4DPI-43T/CT-CLB Ngā Kōwae Whakaatu Maramarama mō te Aratohu Kaiwhakamahi Raspberry Pi
raupapa gen4-4DPI
| RAHI MATA | WHAKATAUTANGA | Momo pa | MO RASPBERI PI | |||
| Inihi | mm | Kore-Pa | Ātete | Pūkaha | ||
| 4.3* | 109.22 | 480 x 272 | . | . | . | . |
| 5.0* | 127.00 | 800 x 480 | . | . | . | . |
| 7.0* | 177.80 | . | . | . | . | |
Kei te waatea ano i te putanga Cover Lens Bezel (CLB).
TANGATA:
Pa Atete (T)
Paa Puarahi me te Bezel Matapihi Uhi (CT-CLB)
Ma tenei aratohu kaiwhakamahi ka awhina koe ki te timata ki te whakamahi i nga waahanga gen4-4DPI-XXT/CT-CLB. Kei roto hoki he rarangi o nga kaupapa whakahirahira examples me nga korero tono.
He aha kei roto i te Pouaka
Kei te waatea nga tuhinga tautoko, nga papaaarangi, nga tauira taahiraa CAD me nga tuhinga tono www.4dsystems.com.au
Kupu Whakataki
Ko tenei Aratohu Kaiwhakamahi he kupu whakataki ki te mohio ki te gen4 4DPiXXT/CT-CLB me te IDE rorohiko e hono ana. Me noho noa tenei pukapuka hei timatanga pai, kaua hei tuhinga tohutoro matawhānui.
I roto i tenei Aratohu Kaiwhakamahi, ka aro poto tatou ki nga kaupapa e whai ake nei:
- Nga Whakaritenga Pumau me nga Pūmanawa
- Me pehea te whakamahi i te gen4-4DPi-XXT/CT-CLB
- Te Timata ki nga Kaupapa Maamaa
- Kaupapa Whakaatu
- Tuhinga Tohutoro
Ko te gen4-4DPi-XXT me te gen4-4DPi-XXCT-CLB he waahanga o te raupapa gen4 o nga waahanga whakaatu i hangaia, i hangaia e te 4D Systems mo nga papa Raspberry Pi. Kei roto i enei waahanga he whakaaturanga LCD tae 4.3", 5.0" me te 7.0" i hangaia ma te papa Raspberry Pi ka tae mai i roto i nga momo pa whakakeke me te capacitive - gen4-4DPi-XXT me gen4-4DPi XXCT-CLB, ia.
Nga Whakaritenga Pūnaha
Ko nga waahanga iti e whai ake nei ka korero mo nga taputapu me nga taputapu rorohiko mo tenei pukapuka.
Pūmārō
- Poari Rahipere Pi
Ko tetahi o nga whakaritenga tino nui ko te Raspberry Pi ka whakamahia hei PTM mo te whakaaturanga 4DPi. - gen4-4DPi-XXT/CT-CLB
Ko te gen4-4DPi-XXT/CT-CLB me ona taonga kei roto i te pouaka, ka tukuna atu ki a koe i muri i to hoko mai i to maatau webpae, na roto ranei i tetahi o a maatau kaihoko. Tena tirohia te waahanga "He aha kei roto i te pouaka" mo nga whakaahua o te waahanga whakaatu me ona taputapu. - gen4-4DPi Whāurutau
Ka whakanohoia te urutau ki runga o te Raspberry Pi. Ka taea e koe te korero ki te ahua i runga i te whakaahuatanga kia kite i te whakatakotoranga tika. - 30-ara te Taura Whakariu Papatahi (FFC)
Ko te taura Flat Flex kua piri ki te urutau hei hono atu ki te gen4-4DPi-XXT/CT-CLB. - 5V DC Whakarato
Kia mohio ai koe ki nga korero e hiahiatia ana mo te tuku hiko, tirohia te Pepa Raraunga gen4-4DPi.
Nga whakaritenga
I hangaia te gen4-4DPi ki te mahi tahi me te Raspbian Operating System e whakahaere ana i runga i te Raspberry Pi, i te mea koinei te punaha whakahaere Raspberry Pi mana.
FAKATOKANGA
Kei te waatea te ahua Raspbian OS i te Raspberry Pi mana webpae.
Me pehea te whakamahi i te GEN4-4DPI-XXT/CT-CLB
Tikiake me te Tāuta
- Tangohia te Raspberry Pi hou
https://www.raspberrypi.com/software/ - Utaina te ahua Raspberry Pi ki te kaari SD
- I muri i te utaina o te ahua file, whakauruhia te kaari SD ki roto i te Raspberry Pi ka tono mana.
FAKATOKANGA: Kaua e hono tonu te gen4-4DPI-XXT/CT-CLB! - Me takiuru koe ki roto i te Raspberry Pi mai i to papapātuhi/aroturuki ma te whakamahi i nga tohu 'pi' me te 'raspberry', ki te kore SSH ki to Raspberry PI ka takiuru ma to hui SSH.
- Whakahou me te whakahou i to Raspberry Pi kia mohio kei te whakahaere koe i te putanga hou o te kernel me te firmware.
sudo apt-tiki whakahou
sudo apt-tiki whakahou
FAKATOKANGA: Me mahi he whakamohoatanga i muri i te mohio kei te tautokohia te kakano hou e te kete kakano hou mai i te 4D. Ki te kore, ma te whakauru i te kete 4D ka whakaheke te pata.
Whakahouhia te Raspberry Pi
sudo whakaara ano - I muri i te whakaara ano, takiuru ano ki to Raspberry Pi, ka hiahia koe ki te tango me te whakauru i te kernel e tautoko ana i nga whakaaturanga gen4-4DPi.
- Ki te tango me te whakauru i te ahua kernel mai i te 4D Systems Server, tirohia koa te Gen4-4DPi Raraunga Raraunga
- Whai muri i te whakaurunga pai o te ahua file, katia te haumaru Raspberry Pi
FAKATOKANGA: me te tango i te mana i muri i te mutunga o tana kati.
sudo poweroff
or
sudo kati inaianei - Whakauruhia te whakaaturanga gen4-4DPi ki te Raspberry Pi e whakaatuhia ana i te ahua i raro nei ka whakamahi ano i te mana
Te Whakatairanga i te Pa Whakatau
Ko ia gen4-4DPi ka tukuna mai i te wheketere 4D Systems he paku rereke, i te mea he rereke te rereke o ia mata pa. Kia pai ai to hua mai i to gen4-4DPi, me whakatikatika e koe te whakaaturanga kia tika ai.
Hei whakatikatika i te mata pa, ka hiahiatia te xinput_calibrator me nga mahi e whai ake nei. Me mohio karekau te Papamahi i te rere i mua i to tiimata, ka mutu te papamahi mena kei te mahi ka hoki ki te tohu tere. Kia mahara ko nga waahanga whakaatu pa whakaahuru anake ka taea te whakatika.
- Tāutahia te xinput_calibrator (mehemea kaore i whakauruhia ma te taunoa) ma te whakahaere i tenei mai i te tauranga:
sudo apt-tiki tāuta xinput-calibrator - Tāutahia te atekōkiri tāuru pūrere takahanga:
sudo apt-tiki tāuta xserver-xorg-input-evdev - Whakaingoa ano 10-evdev.conf file ki 45-evdev.conf
sudo mv /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share /X11/xorg.conf.d/45-evdev.conf - Tirohia mehemea he nui ake te nama o evdev.conf i te libinput.conf ls /usr/share/X11/xorg.conf.d/
Me whiwhi te kaiwhakamahi i tetahi mea penei
10-quirks.conf 40-libinput.conf 45-evdev.conf 99 fbturbo.conf - Mahia he whakaara ano
sudo whakaara ano inaianei - Hono atu ki te SSH ka whakahaere xinput calibrator.
WHAKAATU =:0.0 xinput_calibrator
Mahia te whakatikatika me te kape i nga hua.
Me rite nga hua ki tenei
Wahanga "InputClass"
Kaitohu “whakatikatika”
Hua Whakataurite "AR1020 Mata Paa"
Kōwhiringa "Whakatau" "98 4001 175 3840"
Kōwhiringa "HuriAwhi" "0"
Wāhanga Whakamutunga - Ka taea e koe te whakamatautau i nga huringa i muri i te mutunga o te xinput calibrator. Kia mau tonu nga huringa, whakapiri i nga hua ki calibration.conf file.
sudo nano /etc/X11/xorg.conf.d/99-calibration.conf - Whakaorangia te file ka mahi i te whakaara ano
sudo whakaara ano inaianei
Hurihia te Whakaaturanga Whakaatu
Ka taea te huri i te Takotoranga Mata o te whakaaturanga. Hei whakatinana i tenei, e rua nga mea hei whakarereke:
- Hei huri i te takotoranga whakaatu, whakatika noa te cmdline.txt file
sudo nano /boot/cmdline.txt - Tāpirihia te tawhā i raro nei ki te tūnga tuarua i te rārangi tawhā: 4dpi.rotate = 90
Hurihia tenei kia whai uara 0, 90, 180, 170 ranei. Me penei te ahua:
dwc_otg.lpm_enable=0 4dpi.rotate=90 console=serial0,115200
Whakaorangia te file ka whakaara ano i to Raspberry Pi. Ko te mata pa ka remap aunoa i te tirohanga whakawhetai ki te kernel ritenga.
Mana Whakamuri
Ka taea te whakahaere i te kanapa o muri mai i te tauranga, mai i te tuhinga bash ranei. Ka taea te whakamahi i te whakahau e whai ake nei hei tautuhi i te rama whakamuri mai i te 0 ki te 100%
sudo sh -c 'echo 31> /sys/class/backlight/4dhats/maramarama'
Ko nga mea o runga ake nei ka tautuhi i te rama whakamuri ki te 100%. Hurihia noa te 'echo 31' hei aha mai i te 0 ki te 31.
Te Timata Ma te Kaupapa Maamaa
I muri i te hono i te whakaaturanga me te uira te ahua, ka taea e koe te timata ki te mahi kaupapa. Ko tenei kaupapa e whakaatu noa ana i tetahi pouaka korero i runga i te gen4-4DPi e kii ana "KIA ORA TE AO".
WAHA 1: Tuhituhi
Hipanga 1: Whakahoutia te putanga Python
Ka whakamahia e tenei kaupapa te Python 3.5.3. Ki te mohio ki te putanga o to python3, ka taea e koe te whakamahi
$ python3 ––putanga
Ka taea e koe te whakahou i to putanga python3 ma te whakamahi i te whakahau
$ sudo apt-tiki whakahou
$ sudo apt-tiki tāuta python3
Hipanga 2: Tāuta PyQt
Ko PyQt tetahi o nga here Python tino rongonui. Ka whakamahia e tenei kaupapa te herenga PyQt hei whakaatu i te putanga.
Hei whakauru i te PyQt, whakahaerehia te whakahau e whai ake nei:
$ sudo apt-tiki tāuta python3-pyqt4
Hipanga 3: Hono ki SSH
Ka taea e koe te whakahaere i to taputapu BeagleBone mai i te tauranga mamao ma te whakamahi i nga huarahi maha. Ko tenei exampE whakaatu ana me pehea te mahi ma te whakamahi i te SSH.
- Takiuru ma te whakamahi i to SSH. Ka whakamahia e tenei appnote te taputapu MobaXterm hei hono ma te SSH.
- Haere ki te Papamahi ka hanga he hou file “HelloWorld.py”.
- Tuwhera ma te whakamahi i te Kuputuhi Sublime, tetahi atu ētita ranei kua whakauruhia e koe ki to rorohiko.
- Whakapirihia te tuhinga ki raro ka Tiaki:
kawemai sys
mai PyQt4 kawemai QtGui
matapihi def():
taupānga = QtGui.QApplication(sys.argv)
widget = QtGui.QWidget()
tapanga = QtGui.QLabel(widget)
label.setText(“Kia ora te Ao!”)
widget.setWindowTitle(“PyQt”)
widget.show()
sys.exit(app.exec_())
if ingoa == ' matua ':
matapihi()
WAHA 2: Whakahaere i te Kaupapa
Kōwhiringa 1: Whakahaerehia te Hōtuhi Python Ma te whakamahi i te Rahipere Pi Terminal
Hei whakahaere i te tuhinga python ma te whakamahi i te Gen4-4DPi Whakaatu, whakatere ki te waahi ka tiakina te tuhinga python katahi ka whakahaere i te whakahau:
$ python3 HelloWorld.py
Kōwhiringa 2: Whakahaerehia te Hōtuhi Python Mā te SSH
Whakatere ki te whaiaronga o te tuhinga (i tenei keehi, Papamahi).
He mea whiriwhiri tenei engari ka taea e koe te whakamatautau i to tuhinga ki to tauranga mamao ma te rere,
$ python3 HelloWorld.py
Hei whakahaere i te tuhinga mai i te tauranga mamao ka whakaatu ki te gen4-4DPi,
$ WHAKATAKI =:0.0 python3 HelloWorld.py
Me penei te ahua o te gen4-4DPi:
Tuhinga Tohutoro
Ko te kaupapa "HelloWorld" tetahi o nga kaupapa tino noa me nga kaupapa taketake ka mahia i roto i nga reo katoa, tae atu ki te Python. Ko te rarangi o nga waahi me nga tuhinga e whai ake nei ka awhina i te kaiwhakamahi ki te whakarei ake i nga kaupapa GUI me te mohio atu mo te gen4-4DPi:
gen4-4DPi Pepa Raraunga
Kei roto i tenei tuhinga nga korero tino nui e pa ana ki te gen4 4DPi.
Rahipere Pi Webpae
He waahi pai hei timata mo nga korero me te tautoko mo te Raspberry Pi me nga momo tohatoha e waatea ana.
Rahipere Pi Whakaahua Hou
Tenei webKa korerohia e te paetukutuku nga whakaahua firmware hou mo te Raspberry Pi.
FAKATOKANGA: Mo te tautoko mo te taputapu gen4-4DPi haere koa ki www.4dsystems.com.au me whakapā tika atu ki te Tautoko ma te Tikiti, me whakamahi ranei i te Huinga Pūnaha 4D.
KUPU KUPU
- Whakamuri - He ahua o te whakamarama e whakamahia ana i roto i nga waahanga whakaatu LCD.
- Calibrate Touch - He tukanga i mahia hei whakapai ake i te tika o te waahi pa kua whakamaoritia e whakaratohia ana e te kaiwhakahaere mata pa.
- Firmware – He raupaparorohiko pumau kua hotaka ki te pumahara panui-anake.
- Whakaahua File – He kape raupapa o te ahua katoa o te punaha rorohiko e rongoa ana ki etahi ahua kore-kore.
- Kernel – Whakahaerehia nga mahi o te rorohiko me te taputapu.
- PyQt - Ko te PyQt tetahi o nga herenga Python tino rongonui mo te anga C++ cross-platform Qt.
- Python – He reo hötaka taumata teitei i hangaia kia ngawari ki te panui me te ngawari ki te whakatinana.
- Raspbian - Ko te punaha whakahaere mana e whakamahia ana e Raspberry Pi.
- Whakahou - He tauira mo te kati me te whakaara ano i tetahi taputapu.
- Whakaaturanga Paa Atete – He whakaaturanga pa-tairongo he mea hanga e rua nga pepa ngawari kua whakakikoruatia ki te papanga parenga, ka wehea e te hau hau, i nga microdots ranei.
- SSH – Secure Shell or Secure Socket Shell, he kawa whatunga e hoatu ana ki nga kaiwhakamahi, ina koa ki nga kaiwhakahaere punaha, he huarahi haumaru ki te uru atu ki te rorohiko ma te whatunga kore haumaru.
Tirohia to maatau webpae i: www.4dsystems.com.au
Tautoko Hangarau: www.4dsystems.com.au/support
Tautoko Hokohoko: sales@4dsystems.com.au
Tuhinga / Rauemi
 |
4D SYSTEMS gen4-4DPI-43T/CT-CLB Kōwae Whakaatu Maamaa mo te Raspberry Pi [pdf] Aratohu Kaiwhakamahi gen4-4DPI-43T CT-CLB, gen4-4DPI-50T CT-CLB, gen4-4DPI-70T CT-CLB, Gen4-4DPI Rangatū, Whakaaturanga Whakaaturanga Maamaa mo te Raspberry Pi, gen4-4DPI-43T CT-CLB Whakaaturanga Whakaaturanga Ataata mo te Raspberry Pi |
