amazon basics CF2004-W, CF2004-B Poihi tuanui me te Marama LED me te Mana Mamao Pukapuka Kaiwhakamahi

Mounting bracket, Canopy, Hanger ball, Down rod, Coupling cover, Fan motor assembly, Light kit pan, LED module, Plastic shade, Blades, Remote-control receiver, Remote control.
Hardware such as wire nuts, blade attachment screws and washers, balancing clip and adhesive weights, AAA batteries, extension wires, and various preassembled sets.

Tools needed: Phillips screwdriver, Flathead screwdriver, Adjustable wrench, Electrical tape, Wire cutter, Step ladder.

Wāhanga Tapahiview

The parts included in the package are essential for the proper installation and functioning of the ceiling fan with LED light and remote control. Make sure all parts are accounted for before starting the installation process.

Tauira

Model: CF2004-W,CF2004-B

Nga Tohutohu Haumaru

Me ata panui enei tohutohu ka pupuri tonu hei whakamahi a meake nei. Mena ka tukuna tenei hua ki tetahi tuatoru, me whakauru enei tohutohu.
When using the product, basic safety precautions should always be followed to reduce the risk of injury, including the following.

TE WHAKAMAHI Risk of suffocation! Keep packaging materials away from children and pets. These materials are a potential source of danger, such as suffocation.
Read all instructions, product labels, and warnings before using the ceiling fan.

Read and make sure you understand this entire manual before attempting to assemble, install, or operate this fixture.
This light fixture requires a 120 V AC power source.

All wiring must be under the National Electrical Code, ANSI/NFPA 70, and local electrical codes. Electrical installation should be performed by a qualified, licensed electrician.
WHAKATŪPATO: Risk of fire, electric shock, or injury! Do not use any replacement parts that are not recommended by the manufacturer, such as makeshift or 3D-printed parts.

WHAKATŪPATO: All replacement of parts and mounting of the safety suspension system should be performed by qualified, licensed electricians.
To reduce the risk of fire, electric shock, or personal injury, mount to the outlet box marked acceptable for fan support of 15.9 kg (35 lbs.) or less, and use the mounting screws provided with the outlet box.

Ko te nuinga o nga pouaka putanga e whakamahia nuitia ana mo te tautoko i nga rama rama kaore e whakaaetia mo te tautoko powhiri me te mea me whakakapi. Me toro atu ki tetahi tohunga hiko mena kei te ruarua.
The fixing means for attachment to the ceiling, such as hooks or other devices, should be fixed with a sufficient strength to withstand four times the weight of the ceiling fan.

To reduce the risk of injury, install the fan so the blade is at least 2.3 m (7.5 ft.) above the ground.
Do not operate the reversing switch while the fan blades are in motion. Turn the fan off and wait until the blades stop completely before reversing blade direction.

Kaua e tuu he taonga ki te ara o nga matatahi.
To avoid injury or damage, use caution when working around or cleaning the fan.

Whai muri i te hanga hononga hiko, me huri whakarunga nga kaitarai kua honoa ka ata pana ki runga ki te pouaka putanga.
The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box. The ungrounded conductor should be on the other side of the outlet box.

Ko nga huinga huinga katoa me tirotiro me te whakapiri ano i nga waahi e tika ana i mua i te whakaurunga.
Ko tenei taputapu ehara i te mea mo te whakamahi ma nga tangata (tae atu ki nga tamariki) he iti te kaha o te tinana, te tairongo, te hinengaro ranei, te kore mohio me te mohiotanga, mena kaore i tukuna ki a raatau te tirotiro me te tohutohu mo te whakamahi i te taputapu e te tangata e kawe ana i a raatau. haumaru.

Tiakina enei tohutohu.
WHAKATŪPATO: Te morearea o te ahi, o te ru hiko ranei!
Kaua e whakamahia tenei peera ki tetahi taputapu mana tere-kaha.
This fan should only be used with fan speed control parts.

This fan must be installed with an isolating wall switch.
Whakawetohia te hiko i te wehenga ara iahiko, te hiko ranei. Tuhia te rīpene ki runga i te pana ara iahiko me te manatoko kua weto te hiko i te rama rama.
WHAKATŪPATO: Morearea o te whara whaiaro!
If you observe unusual oscillating movement, immediately stop using your ceiling fan and contact a qualified, licensed electrician.
Do not bend the blade brackets when installing, balancing, or cleaning the blades.

Ihirangi mokete

Pūmārō

Utauta Hiahia

Wāhanga Tapahiview

I mua i te Whakamahinga Tuatahi

Unpack your ceiling fan and remove any packing material.
Make sure all parts are present. Compare the parts with the “Hardware” and “Package Contents” sections to make sure everything is included. If any part is missing or damaged, do not attempt to assemble, install, or operate your ceiling fan.

Determining Mounting Location

WHAKATOKANGA To reduce the risk of fire, electric shock, or personal injury, mount to the outlet box marked acceptable for fan support of 15.9 kg (35 lbs.) or less, and only use the mounting screws provided with the outlet box.
To reduce the risk of injury, install your ceiling fan so the blades are at least 2.3 m (7.5 ft.) above the ground.
Ko te nuinga o nga pouaka putanga e whakamahia ana mo te tautoko o nga rama kaore i te manakohia mo te tautoko a nga kaiwhaiwhai, akene me whakakapi.
Consult a qualified electrician if in doubt. The fixing means for attachment to the ceiling, such as hooks or other devices, should be fixed with a sufficient strength to withstand four times the weight of the ceiling fan.
Install your ceiling fan on a sloped ceiling under 15 degrees.

Te Tāuta i te Taiapa Whakapuru

WHAKATŪPATO: Whakawetohia te hiko i te wehenga ara iahiko, te hiko ranei. Tuhia te rīpene ki runga i te pana ara iahiko me te manatoko kua weto te hiko i te rama rama.

Unscrew and carefully remove the existing light or fan.
Check the outlet box and make sure it can support the fan’s weight.
- WHAKATŪPATO: Ko te nuinga o nga pouaka putanga e whakamahia nuitia ana mo te tautoko i nga rama rama kaore e whakaaetia mo te tautoko powhiri me te mea me whakakapi. Me toro atu ki tetahi tohunga hiko mena kei te ruarua.
- The fixing means for attachment to the ceiling, such as hooks or other devices, should be fixed with a sufficient strength to withstand four times the weight of the ceiling fan.
- WHAKAARO: Ko nga huinga huinga katoa me tirotiro me te whakapiri ano i nga waahi e tika ana i mua i te whakaurunga.
Align the mounting bracket (A) with the outlet box and tighten two screws (not included) on each side of the mounting bracket (A). Make sure not to overtighten the screws.

Assembling the Ceiling Fan

WHAKAARO: Do not discard any of the preassembled screws after removing them. You will need them in later steps.

Attach the blade (J) to the fan motor assembly (F) with three blade attachment screws and washers (BB). Repeat for all three blades.
- WHAKAARO: An extra blade attachment screw and washer (BB) is provided in case one is lost or misplaced.
The fan motor assembly (F) arrives with three preassembled screws. Remove one screw and loosen the other two.
- Align the light kit pan (G) by placing two of the preassembled screws through the keyholes and twist to lock in place. Add the third screw through the standard hole and tighten all three.
Remove the three preassembled screws from the outer ring of the light kit pan (G).
Align the LED module (H) with the light kit pan (G) and connect the corresponding wires. Make sure the wires are secure.

Attach the LED module (H) by inserting the screws removed in step 3.

Attaching the Down Rod

Disassemble the down rod (D) by removing the crosspin (EE) and unscrewing the hanger ball screw set (FF), then sliding the hanger ball (C) up. Remove the lock pin (GG) and the hitch pin (HH). Make sure to keep track of the hardware.
Remove the fan motor assembly coupling set screws (II).
Align the down rod (D) with the fan motor assembly (F) and thread the male wires up through the top of the down rod (D).

Slide the down rod (D) onto the fan and align the holes. Secure the down rod with the lock pin (GG) and place the hitch pin (HH) through the hole in the lock pin (GG).
Finish securing the down rod (D) by tightening two coupling set screws (II) on either side at the bottom of the down rod (D).
Slide the coupling cover (E) and canopy (B) over the down rod (D).

Insert the hanger ball (C) into the hanging lever, then insert the cross pin (EE) into the hole of the hanging lever.
Lift the hanger ball (C) over the cross pin (EE), then lock it in place with the hanger ball screw set (FF).

Te hono i nga Waea Hiko

Hang the fan motor assembly (F) carefully onto the mounting bracket (A) for wiring. Make sure the ball head slot is in the center of the hanger rib. Make sure it is secure.

Strip or trim the electrical wires with wire cutters as necessary.
Slide the remote-control receiver (K) into the mounting bracket (A). Make sure it is secure.
Use a wire nut (AA) to connect the wires:
- green wires: receiver, hanger ball, and mounting bracket.
- neutral voltage white wires: 120 V and fan.
- raina voltage black wires: 120 V and the fan line.
Insert the male wires into the remote-control receiver (K).
- KAUPAPA: Use the male extension wires (M) on the male wires if necessary.
- PANUI: Manage the cables so they are protected. Make sure they are neatly arranged and the wire nuts are secure.
- Use electrical tape to bundle or secure wires as necessary.
- Whai muri i te hanga hononga hiko, me huri whakarunga nga kaitarai kua honoa ka ata pana ki runga ki te pouaka putanga.
- The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box. The ungrounded conductor should be on the other side of the outlet box.

Te Whakaeke i te Poihi Pouaka

The mounting bracket (A) arrives with two preassembled screws (JJ). Remove one screw and loosen the other.
Turn the canopy (B) to align the keyhole with the loosened screw and twist to lock in place.
- Insert the second screw and tighten both.
- Attach the plastic shade (I) to the light kit pan (G) by hand-tightening clockwise.

Using the Ceiling Fan

WHAKATŪPATO: Risk of personal injury! If you observe unusual oscillating movement, immediately stop using your ceiling fan and contact a qualified, licensed electrician.

Whakahoahoa i te Mamao

Turn on your fan, then within 30 seconds, press and hold the Forward/Reverse button for more than three seconds. Your fan beeps twice and the lights turn on with the last setting used.

PANUI: Your remote should already be paired with your fan from the factory. The first pairing uses default lighting.
If the remote does not pair, repeat the pairing process.

Te Wetewete i te Mamao

Press and hold the fan and light button for more than one second to unpair all remotes. You may pair up to three remotes to your fan.

Te whakamahi i te Mamao

Pātene marama: Pēhia kia whakakā/whakaweto te rama.
Pātene pāmahana tae: Press quickly to adjust color temperature. Press repeatedly to cycle through 3000, 4000, and 5000 K. Press and hold to cycle through the brightness settings of 1 (15%), 2 (50%), and 3 (100%).
Paatene Fan: Press to turn your fan on/off.
Pātene tere pā: Press repeatedly to cycle through low, medium, and high fan speed.
Pihi Time: Press repeatedly to cycle through run times of 1 hour, 2 hours, 4 hours, 8 hours, and cancel. The time indicators on the remote light up to show the set time.

Fan direction button: When your fan is on, press once to change direction. Your fan slows to a stop, then changes direction and starts again.
WHAKAARO: A beep will sound each time the button is pressed.

Te horoi me te tiaki

WHAKATŪPATO: Make sure your fan is off and the blades have stopped moving before cleaning.

Risk of personal injury! Do not bend the blade brackets when cleaning the blades.
Some connections may become loose because of your fan’s natural movement. It is recommended to check the support connections, brackets, and blade attachments twice a year.
Make sure they are secure. Removing your fan is not necessary for these checks.

Clean your fan periodically. Do not use water, as this could damage your fan and pose a risk of electric shock.
Use a soft brush or lint-free cloth when cleaning your fan.
If necessary, apply a light coat of furniture polish to the wood. Cover small scratches with a light application of shoe polish.

The fan motor has permanently lubricated, sealed ball bearings and does not require oil.
Never use corrosive detergents, wire brushes, abrasive scourers, metal, or sharp utensils to clean your ceiling fan.
WHAKATŪPATO: All replacement of parts and mounting of the safety suspension system should be performed by qualified, licensed electricians.

Balancing the Blades

Turn off your fan before attempting any maintenance. Make sure the blades have stopped moving completely.
Wipe the blades with a soft cloth to remove any dust and debris.
Use a screwdriver to make sure all screws are secure.

Attach the balancing clip (CC) in the middle of the edge of a blade.
Turn your fan on the lowest speed, then check if the fan blade wobbles.
Check each blade with the balancing clip (CC) until you find the blade causing the imbalance.

Remove the balancing clip (CC), then stick an adhesive weight (CC) to the top of the blade where the clip was placed.
Turn your fan on the lowest speed, then increase speed gradually and check if the fan blade wobbles. Adjust the adhesive weight (CC) as necessary.

Raparongoā

Raruraru
- My fan will not turn on.
Nga otinga
- Make sure to turn the power on at the circuit breaker or fuse, and make sure to turn on the wall switch.
- Make sure the light fixture is correctly and securely wired to the junction box.
- Make sure the light fixture has the required power supply of AC 120 V.
- Make sure the batteries in your remote are not exhausted. Replace if necessary.
- Make sure the + and – symbols on the batteries are facing the correct direction.
Raruraru
- My fan makes too much noise.
Nga otinga
- Make sure your fan was not damaged in transport.
- Make sure the screws that attach the blades to the fan motor assembly are secure.
- Make sure the blades and plastic shade are secure.
- Make sure no objects or debris are caught in the fan motor assembly.
Raruraru
- My fan wobbles/is unstable.
Nga otinga
- Due to the weight and density of the blades, replacement blades that are not the same will throw off the balance of your fan.
- Make sure the screws that attach the blades to the fan motor assembly are secure.
- Make sure all parts are secure.
- Adjust the fan blade’s balance. See “Balancing the Blades.”
Raruraru
- Kare te rama e ka ana.
Nga otinga
- Make sure to turn the power on at the circuit breaker or fuse and make sure to turn on the remote control.
- Verify that all wire connections are correct and secure. See “Connecting the Electrical Wires.”
- Make sure the light fixture has the required power supply of AC 120 V.
- Make sure the batteries in your remote are not exhausted. Replace if necessary.
- Make sure the + and – symbols on the batteries are facing the correct direction.
- Make sure the LED module is connected properly.
- Make sure the LED module is not damaged.
- If you have additional questions, call a qualified electrician.
Raruraru
- I can’t identify the wires.
Nga otinga
- If you have tried to identify the wires and are still unsure, call a qualified electrician.
Raruraru
- The remote isn’t working to control the fan.
Nga otinga
- Make sure the batteries in your remote are not exhausted. Replace if necessary.
- Make sure the + and – symbols on the batteries are facing the correct direction.
- Nearby devices may be interrupting the wireless signal. Wait a few seconds, then try again. If necessary, pair the remote control with your ceiling fan.

Tohu Whakamarama

Ko tenei hua mo te whakamahi o roto anake.

Whakatakotoranga

Whakauru voltage	AC 120 V / 60 Hz
Momo whakahaere	Mana mamao
Momo whakapuru	Raro ki raro
Tae hua	B0DT9FM7MS: Matte black and nickel B0DT975GFQ: Matte white and nickel
Te pāmahana tae	CCT 3000 K, 4000 K, 5000 K
Rumeni	200, 700, 1400 lm
CFM	Level 1: 1500 CFM; Level 2: 2500 CFM; Level 3: 3500 CFM
Tere	3 taumata

Panui Ture

FCC – Whakapuakitanga a te Kaiwhakarato mo te Whakariterite

Kaitohu Motuhake	B0DT9FM7MS: Amazon Basics Ceiling Fan with LED Light and Remote Control (Black) B0DT975GFQ: Amazon Basics Ceiling Fan with LED Light and Remote Control (White)
Rōpū Haepapa	Amazon.com Ratonga LLC.
US Whakapā korero	410 Terry Ave N. Seattle, WA 98109, United States
Tau Waea	206-266-1000

Tauākī Tautukunga FCC

Ka tutuki tenei taputapu ki te Wahanga 15 o nga Ture FCC. Ko te mahi i raro i nga tikanga e rua e whai ake nei:
1. Kare pea tenei taputapu e whakararu kino
2. Me whakaae tenei taputapu ki nga pokanoa kua tae mai, tae atu ki te pokanoa ka puta he mahi kore.
Ko nga huringa me nga whakarereketanga kaore i tino whakaaehia e te roopu kawenga mo te hanganga ture ka whakakorehia te mana o te kaiwhakamahi ki te whakahaere i nga taputapu.

Tauākī Whakararuraru FCC

Kua whakamatauria tenei taputapu, kua kitea e u ana ki nga rohe mo tetahi taputapu matihiko Class B, e ai ki te wahanga 15 o nga Ture FCC. I hangaia enei rohe ki te whakarato i te whakamarumaru tika mai i nga pokanoa kino i roto i te whakaurunga whare.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more, of the following measures:

Whakahoahoa, nukuhia ranei te antenna whiwhi.
Whakanuia te wehenga i waenga i nga taputapu me te kaiwhiwhi.
Whakauruhia nga taputapu ki tetahi putanga i runga i te ara iahiko rereke mai i te hononga o te kaiwhiwhi.
Korero atu ki te kaihoko, ki tetahi tohunga hangarau reo irirangi/TV mo te awhina.

Panui IC Canada

This Class B digital apparatus complies with the Canadian CAN ICES (B)/NMB (B) standard.
Kei roto i tenei taputapu nga kaituku tuku raihana-waahi/kaiwhiwhi e u ana ki nga RSS kua whakakorehia te raihana hou, Science and Economic Development Canada. Ko te mahi i raro i nga tikanga e rua e whai ake nei

The device may not cause interference.
The device must accept any interference, including interference that may cause undesired operation of the device.

Only for Fan: This equipment complies with the FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that a 20cm separation distance will be maintained between the device (excluding its handset) and users.

Urupare me te awhina

Ka pai matou ki te whakarongo ki o korero. Tena koa me waiho he whakatauranga me te review na roto i o ota hoko. Mena ka hiahia awhina koe mo to hua, takiuru ki to putea ka whakatere ki te ratonga kiritaki / whakapā mai ki a maatau wharangi.
amazon.com/pbhelp

FAQ

Q: Can I use this ceiling fan outdoors?
- A: This ceiling fan is designed for indoor use only. Using it outdoors may lead to damage and void the warranty.

Q: Me pehea taku huri i te ahunga o nga matatahi powhiriwhiri?
- A: Turn off the fan completely before using the reversing switch to change the blade direction. Wait until the blades stop moving entirely before making any adjustments.
Q: What type of bulbs can I use with the LED light kit?
- A: Use only LED bulbs compatible with the fixture specifications. Using incorrect bulbs may damage the LED module.

Tuhinga / Rauemi

amazon basics CF2004-W, CF2004-B Ceiling Fan with LED Light and Remote Control [pdf] Pukapuka Kaiwhakamahi
CF2004-W, CF2004-B, CF2004-W CF2004-B Ceiling Fan with LED Light and Remote Control, CF2004-W CF2004-B, Ceiling Fan with LED Light and Remote Control, Fan with LED Light and Remote Control, LED Light and Remote Control, Light and Remote Control, Remote Control, Control

Tohutoro

Pukapuka Kaiwhakamahi

Amazon Basics CF2004-W, CF2004-B Ceiling Fan with LED Light and Remote Control

Nga Tohutohu Whakamahi Hua