AT-START-F437 Manual Kaiwhakamahi
Te tiimata me te AT32F437ZMT7
Kupu Whakataki
I hoahoatia a AT-START-F437 hei awhina i a koe ki te tuhura i nga mahi teitei o te moka-32 microcontroller.
AT32F437 e whakauru ana i te ARM Cortex® -M4 matua me te FPU, me te whakatere i te whanaketanga tono.
Ko AT-START-F437 he poari arotake i runga i te AT32F437ZMT7 microcontroller. Kei roto i te taputapu nga peripheral penei i nga LED, nga paatene, e rua nga hononga USB micro-B, te momo-A hono, te hononga Ethernet RJ45, te atanga toronga Arduino ™ Uno R3 me te mahara 16 MB SPI Flash (whakaroa ma te QSPI1). Ko tenei poari arotake he whakauru i te AT-Link-EZ mo te patuiro/whakahōtaka me te kore e hiahiatia etahi atu taputapu whanaketanga.
Ka mutuview
1.1 Nga waahanga
Kei a AT-START-F437 nga ahuatanga e whai ake nei:
- Kei a AT-START-F437 tetahi microcontroller AT32F437ZMT7 kei runga i te papa e whakauru ana i te ARM Cortex® - M4F 32-bit matua me te FPU, 4032 KB mahara Flash me te 384 KB SRAM, i roto i nga kohinga LQFP144.
- Atanga AT-Link runga-papa:
− Ka taea te whakamahi AT-Link-EZ i runga i te papa mo te whakahoahoa me te patuiro (Ko AT-Link-EZ he putanga ngawari o AT-Link, kaore he tautoko aratau tuimotu)
− Ki te wetewetehia te AT-Link-EZ mai i te papa ma te whakapiko i te taha o te hononga, ka taea tenei atanga ki te hono atu ki tetahi AT-Link motuhake mo te kaupapa me te patuiro. - I runga i te poari 20-pin ARM paerewa JTAG atanga (ka taea te hono ki a JTAG tūhono SWD rānei mō te hōtaka me te patuiro)
- 16 MB SPI (EN25QH128A) ka whakamahia hei mahara Flash roa
- Nga tikanga tuku hiko rereke:
− pahi USB o AT-Link-EZ
− OTG1, OTG2 pahi ranei (VBUS1, VBUS2 ranei) o AT-START-F437
− Putanga hiko 5 V o waho (E5V)
− Putanga hiko 3.3 V o waho - 4 x tohu LED:
− LED1 (whero) tohu 3.3 V hiko-ake
− 3 x Kaiwhakamahi LED, LED2 (whero), LED3 (kowhai) me LED4 (matomato), tohu te mana mahi - Patene Kaiwhakamahi me te paatene Tautuhi
- 8 MHz HEXT tioata
- 32.768 kHz LEXT tioata
- I runga i te papa USB momo-A me nga hononga moroiti-B hei whakaatu i te mahi OTG1
- He hononga moroiti-B te OTG2 (Mena kei te pirangi te kaiwhakamahi ki te whakamahi i te aratau matua OTG2, me whai taura urutau)
- I runga i te papa Ethernet PHY me te hononga RJ45 hei whakaatu i te ahuatanga Ethernet
- QFN48 I/O atanga toronga
- E waatea ana nga atanga toronga taonga mo te tauira tere
− Arduino Uno R3 atanga toronga
− LQFP144 I/O atanga toronga
1.2 Te whakamaaramatanga o nga kupu
- Kaipeke JPx ON
Kua whakauruhia te pekepeke. - Kaipeke JPx OFF
Karekau i whakauruhia te peke. - Parenga Rx ON / parenga whatunga PRx ON
Poto ma te solder, 0Ω parenga, parenga whatunga ranei. - Parenga Rx OFF / parenga whatunga PRx OFF Tuwhera.
Te tiimata tere
2.1 Me timata
Whirihorahia te papa AT-START-F437 ki te raupapa e whai ake nei:
- Tirohia te tūnga o te Kaipeke i runga i te waka:
Kei te hono a JP1 ki te GND, ki te OFF ranei (BOOT0 = 0, me te BOOT0 he parenga kume-iho i roto i te AT32F437ZMT7);
E hono ana a JP2 ki te GND (BOOT1=0)
E hono ana a JP4 ki USART1 - Honoa te AT_Link_EZ ki te PC ma te taura USB (Momo A ki te moroiti-B), ka tuku hiko ki te poari arotake ma te hononga USB CN6. Ko LED1 (whero) kei te ka tonu, me etahi atu LED e toru (LED2 ki te LED4) ka timata ki te kimo.
- Whai muri i te pehi i te paatene kaiwhakamahi (B2), ka huri te auau kimo o nga rama e toru.
2.2 AT-START-F437 nga mekameka taputapu whanaketanga
- ARM® Keil® : MDK-ARM™
- IAR™: EWARM
Nga taputapu me te whakatakotoranga
I hoahoatia te papa AT-START-F437 huri noa i te miihinihiko AT32F437ZMT7 i roto i te kete LQFP144.
Ko te Whakaaturanga 1 e whakaatu ana i nga hononga i waenga i te AT-Link-EZ, AT32F437ZMT7 me o raatau taapiri (patene, LED, USB OTG, Ethernet RJ45, SPI me nga hononga toronga)
Ko te Whakaahua 2 me te Whakaahua 3 e whakaatu ana i o raatau waahi i runga i te papa AT-Link-EZ me AT-START-F437.
3.1 Te kowhiringa hiko
Ko te AT-START-F437 e kore e taea anake te hoatu ki te 5 V na roto i te taura USB (ma roto ranei i te hononga USB CN6 i runga i te AT-Link-EZ, i te hononga USB ranei CN2/CN3 i runga i te AT-START-F437), engari ka tukuna ano he waho 5 V mana supply (E5V). Na ko te mana 5 V te 3.3 V mo te microcontroller me ona peripheral ma te whakamahi i runga i te papa 3.3 V voltage te kaiwhakahaere (U2). Ka taea hoki te whakamahi i te titi 5 V o J4, J7 ranei hei mana whakauru, na reira ka tukuna te papa AT-START-F437 ma te wae hiko 5 V.
Ko te titi 3.3 V o J4, ko te VDD ranei o J1 me J2 ka taea te whakamahi tika hei whakaurunga 3.3 V, na reira ka taea ano te poari AT-STARTF437 te tuku mai i te waahanga hiko 3.3 V.
Tuhipoka:
5 V te mana hiko me tuku ma te hononga USB (CN6) i runga i te AT-Link-EZ. Ko tetahi atu tikanga kaore e taea te whakakaha i te AT-Link-EZ. Ina hono tetahi atu papa ki te J4, 5 V me 3.3 V ka taea te whakamahi i te mana whakaputa, ko te 7V pin a J5 hei mana whakaputa 5 V, ko te titi VDD o J1 me J2 hei mana whakaputa 3.3 V.
3.2 IDD
I te wa JP3 OFF (tohu IDD) me R17 OFF, ka taea te hono i te ammeter hei ine i te whakapau hiko o AT32F437ZMT7.
- JP3 WEHE, R17 KI:
Kei te kaha te AT32F437ZMT7. (Karekau te tautuhinga taunoa me te mono JP3 i whakauruhia i mua i te tuku) - JP3 KA KA, R17 MATE:
Kei te kaha te AT32F437ZMT7. - JP3 KAUPAPA, R17 KAUPAPA:
Me hono te ammeter. Mena karekau he mita mita, kaore e taea te hikoi te AT32F437ZMT7.
3.3 Papatonotanga me te patuiro: kua whakaurua AT-Link-EZ
Ko te poari arotake e whakauru ana i te Arery AT-Link-EZ mo nga kaiwhakamahi ki te hotaka / patuiro i te AT32F437ZMT7 i runga i te papa AT-START-F437. Ka tautoko a AT-Link-EZ i te aratau atanga SWD, SWO patuiro, me te huinga o nga tauranga COM mariko (VCP) hei hono atu ki te USART1_TX/USART1_RX (PA9/PA10) o AT32F437ZMT7.
Tena tirohia te pukapuka Kaiwhakamahi AT-Link mo nga taipitopito katoa mo AT-Link-EZ.
Ko te AT-Link-EZ kei runga ka taea te wetewete, te wehe ranei i te AT-START-F437. I tenei take, ka taea tonu te hono atu te AT-START-F437 ki te atanga CN7 (kaore i whakauruhia i mua i te wehe i te wheketere) o AT-Link-EZ na roto i te atanga CN4 (kaore i whakauruhia i mua i te wehe i te wheketere), ki te AT-Link ranei, i runga i te raupapa. ki te haere tonu ki te hotaka me te patuiro i te AT32F437ZMT7.
3.4 Te whiriwhiri aratau Whakaara
I te tiimatanga, e toru nga momo momo whawhai e waatea ana hei kowhiri ma te whirihoranga titi.
Ripanga 1. Tautuhinga peke whiriwhiri aratau whakaoho
| Kaipekepeke | whirihoranga titi | Aratau Whakaara | |
| PUKA1 | BOOTO | ||
| JP1 ki te GND me OFF ranei JP2 hei whiriwhiri, kia OTI ranei |
X | 0 | Whakaara mai i te mahara Flash o roto (tautuhinga taunoa wheketere) |
| JP1 ki VDD JP2 ki GND |
0 | 1 | Whakaara mai i te mahara pūnaha |
| JP1 ki VDD JP2 ki VDD |
1 | 1 | Whakaara mai i te SRAM o roto |
3.5 Putake karaka o waho
3.5.1 puna karaka HEXT
E toru nga tikanga hei whirihora i nga puna karaka tere-tere o waho ma te taputapu:
- Kiriata i runga i te papa (tautuhinga wheketere taunoa)
Ka whakamahia te karaihe 8 MHz i runga i te poari hei puna karaka HSE. Me whirihora te taputapu: R1 me R3 ON, R2 me R4 OFF. - Oscillator mai i waho PH0
Ka werohia te oscillator o waho mai i te titi_23 o J2. Me whirihora te taputapu: R2 ON, R1 me R3 OFF. Hei whakamahi i te PH1 hei GPIO, ka taea te hono atu a R4 ON ki te pine_24 o J2. - HSE kaore i whakamahia
Ka whakamahia te PH0 me te PH1 hei GPIO. Me whirihora te taputapu: R14 me R16 ON, R1 me R15 OFF.
3.5.2 LEXT puna karaka
E toru nga tikanga hei whirihora i nga puna karaka tere iti o waho ma te taputapu:
- Kiriata i runga i te papa (tautuhinga wheketere taunoa)
Ka whakamahia te karaihe 32.768 kHz i runga i te poari hei puna karaka LEXT. Me whirihora te taputapu: R5 me R6 ON, R7 me R8 OFF - Oscillator mai i waho PC14
Ka werohia te oscillator o waho mai i te titi_3 o J2. Me whirihora te taputapu: R7 me R8 ON, R5 me R6 OFF. - LEXT kaore i whakamahia
Ko te MCU PC14 me te PC15 ka whakamahia hei GPIO. Me whirihora te taputapu: R7 me R8 ON, R5 me R6 OFF.
3.6 LED
- Hiko LED1
E tohu ana te LED Whero ko te AT-START-F437 e whakakaha ana i te 3.3 V. - Kaiwhakamahi LED2
Kei te hono te LED Whero ki te titi PD13 o AT32F437ZMT7. - Kaiwhakamahi LED3
Ko te LED kowhai e hono ana ki te titi PD14 o AT32F437ZMT7. - Kaiwhakamahi LED4
Ka honoa te LED Green ki te titi PD15 o AT32F437ZMT7.
3.7 Patene
- Tautuhi B1: Patene Tautuhi
Kei te hono ki te NRST ki te tautuhi i te AT32F437ZMT7 microcontroller. - Kaiwhakamahi B2: Patene Kaiwhakamahi
Kua honoa ki te PA0 o AT32F437ZMT7 hei patene whakaoho (R19 ON me R21 OFF), ki te PC13 ranei hei mahi hei TAMPPātene ER-RTC (R19 OFF me R21 ON)
3.8 whirihoranga OTGFS
Ka tautokohia e te poari AT-START-F437 te OTGFS1 me te OTGFS2 te kaihautu tere / iti-tere, te aratau taputapu tere-katoa ranei ma te hononga USB micro-B (CN2, CN3 ranei). I roto i te aratau taputapu, ka taea te hono atu a AT32F437ZMT7 ki te kaihautu ma te USB micro-B, ka taea te whakamahi VBUS1, VBUS2 ranei hei whakauru 5 V o te papa AT- START-F437. I roto i te aratau manaaki, ka hiahiatia he taura USB OTG o waho hei hono atu ki te taputapu o waho. Ko te taputapu he mana ma te USB micro-B atanga, na te PH3 me te PB10 e whakahaere ana i te whakawhiti SI2301.
Ko te papa AT-START-F437 he atanga toronga momo USB-A (CN1). He atanga ope OTGFS1 tenei mo te hono atu ki te kōpae U me etahi atu taputapu, me te kore e hiahiatia he taura USB OTG. Ko te atanga momo-A USB kaore he mana whakawhiti hiko.
Ina whakamahia te PA9, te PA10 ranei o te AT32F437ZMT7 hei OTGFS1_VBUS, OTGFS1_ID ranei, me kowhiri te peke JP4 i te OTG1. I tenei keehi, ka hono te PA9, PA10 ranei ki te atanga USB micro-B CN2, engari ka momotuhia mai i te atanga AT-Link (CN4).
3.9 QSPI1 atanga mahara Flash
Ko te SPI i runga i te poari (EN25QH128A), e hono ana ki te AT32F437ZMT7 ma te atanga QSPI1, ka whakamahia hei mahara Flash roa.
Ko te atanga QSPI1 e hono ana ki te mahara Flash me te PF6~10 me te PG6. Mena ka whakamahia enei GPIO mo etahi atu kaupapa, ka tūtohu kia whakawetohia te RP2, R21 me te R22 i mua.
3.10 Itarangi
Ko AT-START-F437 he whakauru i te Ethernet PHY e hono ana ki te DM9162EP (U4) me te atanga RJ45 (CN5, me te whakawhiti wehe a-roto), mo te whakawhitiwhiti 10/100 Mbps Ethernet.
Ma te taunoa, ka hono te Ethernet PHY ki te AT32F437ZMT7 i te aratau RMII. I tenei take, ko te CLKOUT (PA8 pine) o te AT32F437ZMT7 e whakarato ana i te karaka 25 MHz mo te pine XT1 a PHY hei whakatutuki i nga whakaritenga a PHY, ko te karaka 50 MHz o te RMII_REF_CLK (PA1) i runga i te AT32F437ZMT7 e whakaratohia ana e te pine 50 MCLK a PHY. Me toia te titi 50MCLK i te wa e hiko ana.
Kia pai ai te hoahoa PCB, kaore te PHY e hono atu ki waho ki te mahara Flash hei toha i te wahitau PHY [3:0] i te wa o te hiko. Ko te wāhitau PHY [3:0] kua whirihorahia kia 0x3, ma te taunoa. Whai muri i te hiko, ka taea te tautuhi i tetahi wahitau PHY ma te atanga SMI a PHY ma te rorohiko.
Tirohia te pukapuka tohutoro me te papanga raraunga mo etahi atu korero mo Ethernet MAC me DM9162 o te AT32F437ZMT7.
Ki te hiahia te kaiwhakamahi ki te whakamahi i nga atanga toronga LQFP144 I/O J1 me J2 hei utu mo te DM9162 hei hono atu ki etahi atu papa Ethernet, tirohia te Ripanga 2 hei momotu i te AT32F437ZMT7 mai i te DM9162.
A, no te kore e whakamahia te atanga Ethernet, he pai te tohutohu ki te pupuri i te DM9162NP i roto i te tautuhi tautuhi na te PC8 putanga taumata iti.
3.11 0Ω parenga
Ripanga 2. 0Ωtautuhinga parenga
| Parenga | Statern | Whakaahuatanga |
| R17 (MCU inenga kohi hiko) | ON | Ina JP3 OFF, ka honoa te 3.3V ki te mana moroiti hei tuku i te miihiniiti. |
| WATE | I te wa JP3 OFF, ka taea te hono 3.3V ki te ammeter hei ine i te whakapau hiko o te microcontroller. (Kare e taea te hikoi te microcontroller ki te kore te ammeter) | |
| R9 (VBAT) | ON | Kei te hono a VBAT ki te VDD |
| WATE | Ko te VBAT e tukuna ana e te titi_6 (VBAT) o J2. | |
| R1, R2, R3, R4 (HEXT) | ON, OFF, ON, OFF | Ko te puna karaka HEXT ka ahu mai i te karaihe Y1 i runga i te poari |
| OFF, ON, OFF, OFF | Puna karaka HEXT: oscillator o waho mai i te PHO, PH1 kaore i te whakamahia. | |
| OFF, ON, OFF, ON | puna karaka HEXT: oscillator waho i PHO, PH1 whakamahia rite GPIO; PHO ranei, PH1 ka whakamahia hei GPIO. | |
| R5, R6, R7, R8 (LEXT) | ON, ON, OFF, OFF | Ko te puna karaka LEXT ka ahu mai i te karaihe X1 i runga i te poari |
| OFF, OFF, ON, ON | Puna karaka LEXT: oscillator o waho mai i te PC14; PC14 ranei, PC15 ka whakamahia hei GPIO. | |
| R19, R21 (Paetene Kaiwhakamahi B2) | KAUPAPA, KAUPAPA | Ko te paatene Kaiwhakamahi B2 e hono ana ki te PAO. |
| PUTA, ON | Ko te paatene Kaiwhakamahi B2 e hono ana ki te PC13. | |
| R54, R55 (PA11, PAl2) | OFF, OFF | I te mea ko OTGFS1, PA11 me PAl2 kaore i te hono ki te pin_31 me te pin_32 o J1. |
| RUNGA, RUNGA | Ki te kore e whakamahia te PA11 me te PAl2 hei OTGFS1, ka hono ki te pin_31 me te pin_32 o J1. | |
| R42, R53 (PA11, PAl2) | OFF, OFF | I te mea ko OTGFS2, PB14 me PB15 kaore i te hono ki te pin_3 me te pin_4 o J1. |
| RUNGA, RUNGA | Ki te kore e whakamahia te PB14 me te P815 hei OTGFS2, ka hono ki te pine_3 me te pin_4 o J 1. | |
| RP3, R62—R65, R69—R71, R73 (Ethernet PHY DM9162) | ON katoa | Ko te Ethernet MAC o te AT32F437ZMT7 e hono ana ki te DM9162 i te aratau RMII. |
| Katoa WATE | Ko Ethernet MAC o te AT32F437ZMT7 kua momotuhia mai i te DM9162 (He pai ake tenei ki te papa AT-START-F435 i tenei wa) | |
| R56, R57, R58, R59 (ArduinoTM A4, A5) | OFF, ON, OFF, ON | Ko Arduino TM A4 me AS e hono ana ki ADC123_IN11 me ADC123 IN10. |
| ON, OFF, ON, OFF | Arduino TM A4 me AS e hono ana tol2C1_SDA, I2C1 SCL. | |
| R60, R61 (ArduinoTM D10) | PUTA, ON | Ko ArduinoTM D10 e hono ana ki te SPI1 CS. |
| KAUPAPA, KAUPAPA | Ko ArduinoTM D10 e hono ana ki te PVM (TMR4_CH1). |
3.12 Atanga toronga
3.12.1 Arduino Uno R3 atanga
Ko te mono wahine J3~J6 me te tane J7 e tautoko ana i te hononga Arduino Uno R3. Ko te nuinga o nga papa tamahine i hangaia ki runga Arduino Uno R3 e tika ana ki te papa AT-START-F437.
Tuhipoka: Ko nga I/Os o te AT32F437ZMT7 he 3.3 V-hototahi me Arduino Uno R3, engari ehara i te 5 V.
Ripanga 3. Arduino Uno R3 atanga toronga titi whakamāramatanga
| Kaihono | Tau titi | Arduino Pin ingoa | AT32F437 ingoa titi | Whakaahuatanga |
| J4 (putanga hiko) | 1 | NC | – | – |
| 2 | IOREF | 3.3 V tohutoro | ||
| 3 | WHAKATURU | NRST | Te tautuhi o waho | |
| 4 | 3.3V | 3.3 V tāuru / putanga | ||
| 5 | 5V | 5 V tāuru / putanga | ||
| 6 | GND | – | Papa whenua | |
| 7 | GND | – | Papa whenua | |
| 8 | ||||
| J6 (Tauru tairitenga) | 1 | AO | PA0 | ADC123 INO |
| 2 | Al | PA1 | ADC123 IN1 | |
| 3 | A2 | PA4 | ADC12 IN4 | |
| 4 | A3 | PBO | ADC12 IN8 | |
| 5 | A4 | PC1, PB9 ranei(1) | ADC123 IN11 ranei I2C1 SDA | |
| 6 | AS | PCO, PB8 ranei(1) | ADC123 IN10, I2C1 SCL ranei | |
| J5 (Tauru/putanga arorau paita iti) |
1 | DO | PA3 | USART2 RX |
| 2 | D1 | PA2 | USART2 TX | |
| 3 | D2 | PA10 | – | |
| 4 | D3 | PB3 | TMR2 CH2 | |
| 5 | D4 | PB5 | – | |
| 6 | D5 | PB4 | TMR3 CH1 | |
| 7 | D6 | PB10 | TMR2 CH3 | |
| 8 | D7 | PA8(2) | – | |
| J3 (Tauru/putanga arorau paita teitei) |
1 | D8 | PA9 | – |
| 2 | D9 | PC7 | TMR3 CH2 | |
| 3 | D10 | PA15, PB6 ranei(1) | SPI1 CS ko TMR4 CH1 | |
| 4 | Dll | PA7 | TMR3 CH2 / SPI1 MOSI | |
| 5 | D12 | PA6 | SPI1 MISO | |
| 6 | D13 | PA5 | SPI1 SCK | |
| 7 | GND | – | Papa whenua | |
| 8 | AREF | – | VREF+ putanga | |
| 9 | SDA | PB9 | 12C1 _SDA | |
| 10 | SCL | PB8 | 12C1 _SCL | |
| J7 (Atahi atu) | 1 | MISO | PB14 | SPI2 MISO |
| 2 | 5V | 5 V tāuru / putanga | ||
| 3 | SCK | PB13 | SPI2 SCK |
| Kaihono | Pin tau |
Arduino Ingoa titi |
AT32F437 Ingoa titi |
Whakaahuatanga |
| 4 | MOSI | PB15 | SPI2 MOSI | |
| 5 | WHAKATURU | NRST | Te tautuhi o waho | |
| 6 | GND | – | Papa whenua | |
| 7 | NSS | PB12 | SPI2 CS | |
| 8 | PB11 | PB11 | – |
(1) Tirohia te Ripanga 2 mo nga korero mo nga parenga 0Ω.
3.12.2 LQFP144 I/O atanga toronga
Ko nga I/Os o AT-START-F437 microcontroller ka taea te hono ki nga taputapu o waho ma nga hononga toronga J1 me J2. Ko nga I/Os katoa kei runga i te AT32F437ZMT7 e waatea ana i runga i enei atanga toronga. Ka taea hoki te ine i te J1 me te J2 ki te oscilloscope, ki te tātari arorau, ki te tirotiro voltmeter ranei.
Pūkana
Hītori arotakenga
Ripanga 4. Tuhinga o mua whakahounga
| Rā | Arotakenga | Huringa |
| 2021.11.20 | 1 | Tukunga tuatahi |
PANUI PUTA - Tena, PĀNUI PAI
Kei te mohio nga kaihoko me te whakaae ko nga kaihoko anake te kawenga mo te kowhiri me te whakamahi i nga hua me nga ratonga a Artery.
Ko nga hua me nga ratonga a Artery e whakaratohia ana "AS IS" a karekau a Arery e tuku whakamana, e kii ana, e kii ana ranei i te ture, tae atu ki te kore he herenga, nga tohu whakamana mo te hokohoko, te pai o te kounga, te kore he takahi, te pai ranei mo tetahi kaupapa e pa ana ki te Artery's hua me nga ratonga.
Ahakoa nga mea rereke, kaore nga kaihoko e whiwhi mana, taitara, paanga ranei ki nga hua me nga ratonga a Artery me etahi mana mana hinengaro kei roto. Kaua rawa e kiia nga hua me nga ratonga a Artery e whakaratohia ana hei (a) tuku ki nga kaihoko, ma te marama, ma te tohu ranei, he raihana ki te whakamahi i nga hua me nga ratonga a te hunga tuatoru; ranei (b) te raihana i nga mana mana hinengaro o nga roopu tuatoru; ranei (c) whakamana i nga hua me nga ratonga a te hunga tuatoru me ona mana taonga hinengaro.
Ka whakaae nga Kaihoko ko nga hua a Artery kaore i te mana mo te whakamahi, a kaua nga kaihoko e whakauru, e whakatairanga, e hoko atu, e whakawhiti atu ranei i tetahi hua a Artery ki tetahi kaihoko, kaiwhakamahi mutunga ranei hei whakamahi hei waahanga nui i roto i (a) tetahi rongoa, whakaora ora, ora ranei he taputapu tautoko, he punaha ranei, ranei (b) tetahi taputapu haumaru, punaha ranei i roto i tetahi tono me nga tikanga miihini (tae atu engari kaua e iti ki nga punaha motika motika, pukoro rererangi ranei), ranei (c) tetahi whare karihi, ranei (d) tetahi taputapu whakahaere waka rererangi. , tono, punaha ranei, ranei (e) tetahi taputapu patu, tono, punaha ranei, ranei (f) tetahi atu taputapu, tono, punaha ranei e tino kitea ana ko te kore o nga hua o te Arery i whakamahia i roto i taua taputapu, tono, punaha ranei ka arahi. ki te mate, ki te whara tinana, ki te kino rawa ranei
© 2022 ARTERY Technology – Pūmau te mana
2021.11.20
Rev 1.00
Tuhinga / Rauemi
 |
ARTERYTEK AT-START-F437 Mahinga Nui 32 Bit Microcontroller [pdf] Aratohu Kaiwhakamahi AT32F437ZMT7, AT-START-F437, AT-START-F437 Mahi Teitei 32 Bit Microcontroller, High Performance 32 Bit Microcontroller, Mahinga 32 Bit Microcontroller, 32 Bit Microcontroller, Microcontroller |
