X-10 Powerhouse POWERMID Receiver Model RE549 User Manual

Kupu Whakataki

The X-10 Powerhouse POWERMID Receiver Model RE549 is designed to extend the range of your infrared (IR) remote controls, allowing you to operate audio/video equipment located in a separate room or behind closed cabinet doors. This system eliminates the need for direct line-of-sight between your remote control and the equipment, providing convenience and flexibility in your home entertainment setup.

This manual provides detailed instructions for the proper installation, operation, and maintenance of your POWERMID Receiver.

Ihirangi mokete

Tena koa tirohia nga ihirangi o te kete kia mohio kei te noho katoa nga taonga:

X-10 Powerhouse POWERMID Receiver (Model RE549)
X-10 Powerhouse POWERMID Transmitter (often sold separately or as part of a kit, but essential for full functionality)
Pūurutau Hiko AC
Pukapuka Kaiwhakamahi (tenei tuhinga)

Note: The POWERMID system typically consists of a receiver and a transmitter unit. This manual focuses on the receiver, but both are required for operation.

Tatūnga

1. Nga Whakaaro Whakanoho

Turanga Kaiwhiwhi: Position the POWERMID Receiver in the room where your audio/video equipment is located. Ensure the front of the receiver, which contains the IR output, has a clear line-of-sight to the IR sensor of the equipment you wish to control.
Te Tūnga o te Tuku: Place the POWERMID Transmitter in the room where you will be using your remote control. It should be positioned so that your remote control has a clear line-of-sight to the transmitter's IR input.
Aukati i nga arai: Ensure there are no physical obstructions between the receiver and your equipment's IR sensors, or between your remote and the transmitter's IR input.
Puna Hiko: Both units require a standard AC power outlet.

2. Te hono i te Kaiwhiwhi

Connect the provided AC power adapter to the POWERMID Receiver's power input jack.
Monohia te urutau hiko AC ki tetahi putanga pakitara paerewa.
Position the receiver so its IR output window faces the IR sensor of your audio/video component(s). For multiple components, ensure the receiver can "see" all of them.

3. Te hono i te Kaituku

Connect the provided AC power adapter to the POWERMID Transmitter's power input jack.
Monohia te urutau hiko AC ki tetahi putanga pakitara paerewa.
Position the transmitter in the room where you will be using your remote control, ensuring your remote has a clear path to the transmitter's IR input window.

Nga Tohutohu Whakahaere

Once both the POWERMID Receiver and Transmitter are powered on and correctly positioned, operation is straightforward:

Point your existing IR remote control at the POWERMID Transmitter.
Press the desired button on your remote control (e.g., volume up, channel change, power on/off).
The transmitter will capture the IR signal and send it wirelessly to the POWERMID Receiver.
The receiver will then re-transmit the IR signal to your audio/video equipment, just as if your remote control were in the same room.

Whakaaro nui:

Awhe: The effective range between the transmitter and receiver can vary depending on environmental factors and obstructions.
Line-of-Sight (Internal): While the system works through walls, the internal IR signals (remote to transmitter, receiver to equipment) still require line-of-sight.
pokanoa: Avoid placing units near strong electromagnetic fields or other IR devices that might cause interference.

Te tiaki

The X-10 Powerhouse POWERMID Receiver requires minimal maintenance to ensure optimal performance.

Te horoi: Use a soft, dry cloth to clean the exterior surfaces of the receiver and transmitter. Do not use liquid cleaners or abrasive materials.
Whakahau: Ensure that the units are placed in well-ventilated areas and that their vents are not obstructed.
Mana: Disconnect power during electrical storms or when the unit will be unused for extended periods.

Raparongoā

If you experience issues with your POWERMID Receiver, refer to the following common problems and solutions:

Raruraru	Te Take Taea / Rongoa
Remote control signals are not reaching equipment.	Ensure both the receiver and transmitter are powered on and their power adapters are securely connected. Verify clear line-of-sight from your remote to the transmitter, and from the receiver to the equipment's IR sensor. Check if the remote control's batteries are functional. Reposition the receiver closer to the equipment or adjust its angle. Ensure the transmitter and receiver are not too far apart or heavily obstructed by dense materials.
Intermittent or unreliable control.	Check for sources of IR interference (e.g., direct sunlight, plasma TVs, fluorescent lights). Try moving the units. Ensure the power adapters are providing stable power. The units might be too far apart or have too many obstacles.
Kāore he rama tohu hiko.	Verify the power adapter is correctly plugged into both the unit and a working wall outlet. Whakamatautauria te putanga pakitara me tetahi atu taputapu. Whakamātauria tētahi atu urutau hiko hototahi mēnā e wātea ana.

Whakatakotoranga

Āhuahira	Taipitopito
Tau tauira	RE549
Waitohu	X10
Hangarau Hononga	Infrared (IR)
Pūrere Hototahi	Devices controllable by standard IR remote controls (e.g., TVs, VCRs, cable boxes, satellite receivers, stereo systems)
Tikanga Mana	Mamao
Puna Mana	AC Power Adapter (included)
Taumaha Tūemi	9.6 hekere (hua)
Ahu mōkihi	6.1 x 5.3 x 4 inihi (hua)

Pūtāhui me te Tautoko

Specific warranty information for the X-10 Powerhouse POWERMID Receiver Model RE549 is not provided in this document. Please refer to the original product packaging or the manufacturer's official webpae mo nga tikanga me nga tikanga whakamana.

For technical support or further assistance, please visit the X10 official support channels or contact their customer service department. Keep your purchase receipt and model number handy when seeking support.

	Wāhanga Taputapu X10 PAM01/PAM02: Mana Mamao mō ngā Pūrere Kāinga Akohia te X10 PAM01/PAM02 Appliance Module, he kaiwhiwhi kore-whakaiti e tāpiri ana i ngā āheinga mana mamao ki ngā momo taputapu o te whare. Kei roto ko ngā whakatakotoranga, te tatūnga, te tāutanga, me ngā mōhiohio pūtāhui.
	Rārangi Waehere Mana Mamao Ao Whānui X10 UR73A/UR78A mō ngā Pouaka Whakaata, VCR, Ororongo, me Ētahi Atu He rārangi waehere whānui mō ngā tauira Mana Mamao Ao Whānui X10 UR73A me UR78A, e kapi ana i ngā pouaka whakaata, VCR, SAT, CD, DVD, Kōpae Taiaho, Ororongo, me ngā taputapu Aunoatanga Kāinga mai i ngā waitohu maha.
	Fujifilm Digital Camera Raparongoā me te Aratohu Hononga He aratohu matawhānui ki te rapurongoā take noa ki Fujifilm kāmera matihiko, tae atu tau rangatū tauwāhi me ngā hapa kāri pāpāho. Kei te whakaatu hoki i nga tikanga mo te kawemai i nga whakaahua me nga ataata ki te PC, me te rarangi matawhānui o nga tauira kamera Fujifilm me o raatau momo honohono USB.
	Bestway Power Steel Oval Pools Owner's Manual and Installation Guide Comprehensive owner's manual and installation guide for Bestway Power Steel Oval Pools. Covers setup, safety, maintenance, water chemistry, repair, dismantling, and storage. Includes parts list and diagrams.
	M&K Sound X+ Series Subwoofer Operation Manual Discover the full potential of your audio system with the M&K Sound X+ Series Subwoofer Operation Manual. This guide provides comprehensive instructions on setup, connections, phase control, filtering, troubleshooting, and specifications for models like the X10+, X12+, and X15+, ensuring optimal bass performance and integration.
	Pukapuka Tohutohu mō te Kaiwhiwhi Matawai Whānui ALINCO DJ-X10 He pukapuka tohutohu mana mō te kaiwhiwhi matawai whānui a ALINCO DJ-X10, e whakaatu ana i ngā āhuatanga taipitopito, te tatūnga, ngā mahi, me ngā whakaritenga mō te whakamahinga tino pai me te haumaru.

X10 RE549