Moen 7560W Extensa One-Handle Low Arc Pullout Kitchen Faucet User Manual

1. Kupu Whakataki

This manual provides detailed instructions for the installation, operation, and maintenance of your Moen 7560W Extensa One-Handle Low Arc Pullout Kitchen Faucet. The Extensa faucet features a convenient pullout spout for enhanced maneuverability and a single lever handle for precise temperature control. This faucet is designed for single-hole mounting but includes an optional escutcheon for three-hole installations. Please read this manual thoroughly before beginning installation or operation to ensure proper function and longevity of your product.

Image 1.1: Moen Extensa One-Handle Low Arc Pullout Kitchen Faucet in a kitchen setting.

2. Nga korero haumaru

Always observe basic safety precautions when installing or servicing plumbing fixtures. Failure to follow these instructions could result in property damage or personal injury.

• Mau mohiti haumaru i te wa o te whakaurunga hei tiaki i o kanohi.
• Turn off the main water supply before beginning any work on the faucet.
• Me whakarite kia mau nga hononga katoa kia kore ai e pakaru.
• Mena kaore koe i te tino mohio mo tetahi taahiraa, korero ki tetahi tohunga paipa pai.

3. Ihirangi mokete

Manatokohia kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga.

• Moen Extensa Faucet Assembly
• Pullout Spray Wand
• Taumaha Hose
• Optional Escutcheon (for 3-hole installations)
• Whakaekea taputapu
• Tohutohu Tāuta
• Hose Corral (if included with your model or purchased separately)

4. Utauta e hiahiatia ana

Ka tūtohuhia nga taputapu e whai ake nei mo te whakauru:

• Mohiti Haumaru
• Wrench Whakaritea
• Panekene Tohu
• Kumine
• Basin Wrench (for tight spaces)
• Scissors (if adjusting hose corral sleeve length)

5. Tāutanga

5.1 General Faucet Installation

Refer to the detailed installation guide included with your faucet for complete instructions. Key steps typically include:

1. Whakawetohia te tuku wai.
2. Remove old faucet (if applicable).
3. Install the new faucet body through the sink hole(s). Use the escutcheon if installing on a 3-hole sink.
4. Whakamauhia te taputapu mai i raro i te totohu mā te whakamahi i ngā taputapu whakairi kua whakaratohia.
5. Connect hot and cold water supply lines to the faucet.
6. Connect the pullout hose to the quick connect system.
7. Attach the hose weight to the pullout hose at the specified location (refer to your faucet's specific instructions for weight placement).
8. Whakakāhia te tuku wai ka tirohia kei te turuturu.

5.2 Installing the Hose Corral

A hose corral is used to prevent the pullout hose weight from getting caught on the sink drain or other obstructions, ensuring smooth retraction of the spray wand. This video demonstrates the installation process.

1. Whakaritenga: Ensure you have safety glasses and scissors (if needed for trimming the sleeve).
2. Āpiti Topenga: Snap the blue clip onto the stationary portion of the pullout hose, just above the quick connect system. This clip will hold the top of the hose corral sleeve.
3. Tāuta te ringaringa: Slide the clear plastic sleeve over the pullout hose and its weight, guiding it upwards until it reaches the blue clip. Position the hole in the sleeve over the clip and pull down gently to secure the sleeve in place.
4. Adjust Sleeve Length (Optional): If the sleeve is too long and interferes with other components under the sink, you can shorten its length using scissors along the marked lines.

6. Mahi

Your Moen Extensa faucet is designed for ease of use and versatility.

Image 6.1: Close-up of the Moen Extensa faucet's pullout spray wand.

• Mana Kakau: The single lever handle controls both water flow and temperature. Move the handle left for hot water, right for cold water, and up/down to adjust flow. The handle has a 100-degree arc of travel for precise control.
• Pullout Spout: Grasp the spray wand and pull it out from the main faucet body. The flexible hose allows for extended reach for cleaning or rinsing.
• Aratau Rehu: The spray wand operates in either stream or spray mode. Press the button on the spray wand to switch between these two modes. This can be done whether the wand is pulled out or retracted.
• Tangohanga: When finished, guide the spray wand back into the faucet body. The hose weight under the sink assists in smooth retraction.

7. Tiaki

Proper care and maintenance will ensure the long-lasting beauty and performance of your Moen faucet.

• Te horoi: Clean your faucet regularly with a soft cloth and warm, soapy water. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Tiaki Aerator: If water flow decreases, the aerator may be clogged. Unscrew the aerator from the tip of the spout, clean any debris, and reattach.
• Tirohanga Hose: Periodically inspect the pullout hose and connections under the sink for any signs of wear or leaks.

8. Te Raru

If you encounter issues with your faucet, refer to the following common solutions:

9. Whakatakotoranga

10. Nga Korero Whakaputanga

This Moen faucet is backed by a He Rarangi Momo Ora. For specific details regarding coverage and terms, please refer to the warranty documentation included with your product or visit the official Moen webpae.

11. Tautoko

For further assistance, product information, or to contact customer service, please use the following resources:

• Webpae: moen.com
• Waea: 1-800-BUY-MOEN (1-800-289-6636)