Kupu Whakataki
Thank you for choosing the Codelocks CL1005 Standard Vertical Cabinet Lock. This keyless digital lock provides secure access for cabinets and lockers. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your lock.
Image: Codelocks CL1005 Standard Vertical Cabinet Lock. This image displays the front view of the CL1005 lock, showing the keypad and the main body.
Tatūnga me te Tāuta
The CL1005 lock is designed for easy installation and can serve as a quick retrofit for existing cam locks or for new installations on units without a lock. It fits doors up to 1/2 inch (12.7 mm) thick and features a 5/8 inch (15.8 mm) threaded barrel.
Ihirangi mōkī:
- CL1005 Lock Body
- Whakapiki Tutaki
- Tātauira Tāuta
- 2 x AAA Pūhiko
- Cam (pre-installed or separate)
Hipanga Tāuta:
- Whakapaia te tatau: Use the provided template to mark and drill the necessary holes on the cabinet door. Ensure the door thickness does not exceed 1/2 inch (12.7 mm).
- Whakauruhia te Tinana Maukati: Insert the threaded barrel of the lock body through the prepared hole from the front of the cabinet door.
- Secure Lock Body: From the inside of the cabinet, place the mounting plate over the threaded barrel and secure it with the provided nut. Tighten firmly.
- Install Cam: Attach the appropriate cam to the back of the lock mechanism using the provided screw. Ensure the cam rotates freely and engages with the cabinet frame when locked.
- Whakauruhia nga Pataha: Open the battery compartment cover on the back of the lock. Insert the 2 x AAA batteries, observing the correct polarity (+/-). Close the cover securely.
- Mahi Whakamatau: Before closing the cabinet, test the lock with the default code (refer to the operating instructions for default code and programming).
Nga Tohutohu Whakahaere
The CL1005 lock operates using a user-programmable code. It is powered by 2 x AAA batteries, providing approximately 15,000 openings.
Te Whakatuwheratanga i te Raka:
- Enter your 4-6 digit user code.
- The lock will emit a confirmation tone and the LED will flash green.
- Turn the knob to the unlocked position.
- Whakatuwheratia te kuaha rūnanga.
Kati me te Maukati:
- Katia te tatau rūnanga.
- Turn the knob to the locked position. The lock will automatically engage.
Changing the User Code:
Refer to the specific programming instructions provided with your lock for detailed steps on changing the user code and master code. Generally, this involves entering a programming sequence followed by the new code.
Battery Failure Override:
In case of battery failure, the lock can be temporarily powered using a 9V battery. Locate the two contact points (LEDs) on the front of the lock. Apply the 9V battery across these points (positive to positive, negative to negative). While holding the 9V battery in place, enter the Master Code to open the lock. Replace the internal AAA batteries immediately after gaining access.
Te tiaki
Whakakapinga Pūhiko:
When the batteries are low, the lock may emit a warning signal (e.g., multiple beeps or a red LED flash) upon code entry. Replace the 2 x AAA batteries promptly to ensure continuous operation. Always use high-quality alkaline batteries.
- Open the battery compartment cover on the back of the lock.
- Tangohia nga pākahiko tawhito.
- Insert new 2 x AAA batteries, ensuring correct polarity.
- Katia kia mau te uhi o te wahanga pākahiko.
Te horoi:
Horoia te taha o waho o te raka ki te ngohengohe, damp kakahu. Kaua e whakamahi i ngā kaihoroi whakakoi, ngā whakarewa, ngā matū kino rānei, nā te mea ka kino pea te whakaotinga me ngā wāhanga hiko.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kāore a Lock e whakautu ki te whakaurunga waehere. |
|
|
| Lock opens but does not stay locked. |
|
|
| Lock emits warning beeps/flashes. | He iti te mana pākahiko. | Replace the 2 x AAA batteries immediately. |
Whakatakotoranga
- Tauira: CL1005
- Waitohu: Ngā Maukati Waehere
- Momo Maukati: Keypad, Keyless
- Āhuahira Motuhake: Te urunga kore matua
- Mana: 2 x AAA pākahiko (kua tukuna)
- Ora Pūhiko: Approximately 15,000 openings
- Matotoru o te tatau: Tae atu ki te 1/2 inihi (12.7 mm)
- Rahi Pae: 5/8 inch (15.8 mm) threaded
- Ahu (L x W x H): 6 x 2.5 x 1.5 inihi (152 x 63.5 x 38.1 mm)
- Taumaha: 16 hekere (0.45 kg)
- Mutu: Silver Grey (Painted)
- Tikanga Mana: Paa
- Kāhua: Hou
Pūtāhui me te Tautoko
For warranty information, technical support, or further assistance with your Codelocks CL1005, please refer to the official Codelocks webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko. Puritia to riiki hoko hei tohu mo te hoko.
Mana o Codelocks Webpae: www.codelocks.com
