Kupu Whakataki
This manual provides comprehensive instructions for the setup, operation, and maintenance of your InFocus IN1102 Ultra Mobile Widescreen DLP Projector. Please read this manual thoroughly before using the projector to ensure proper functionality and to maximize its performance and lifespan.
The InFocus IN1102 is designed for portability and performance, featuring WXGA native resolution, 2200 lumens brightness, and DisplayLink™ USB connectivity for simplified setup.
He aha kei roto i te Pouaka
Upon unpacking your InFocus IN1102 projector, please verify that all the following items are included:
- Pūwhakaata InFocus IN1102
- Waea hiko
- Navigator II Remote
- USB (A to mini-B) Cable
- Te VGA Cable
- Kawea Kehi
Ka mutu te huaview
Familiarize yourself with the various components and connection points of your InFocus IN1102 projector.
Whakaahua 1: Mua View with Lens Cap. This image shows the front of the InFocus IN1102 projector, featuring the lens covered by a protective cap and the InFocus logo prominently displayed. The ventilation grille is visible on the left side.
Whakaahua 2: Mua View without Lens Cap. This image displays the front of the projector with the lens cap removed, revealing the projector lens. The InFocus branding and ventilation are clearly visible.
Figure 3: Rear Panel with Connectivity Ports. The rear panel of the InFocus IN1102 is shown, highlighting the various input ports including DisplayLink USB, VGA (Computer 1 and Computer 2), Video 1 (S-Video), Video 2 (Composite), and Audio In. The power input socket is on the far left.
Figure 4: Top Panel and Control Keypad. Ka whakaratohia e tenei whakaahua te tihi-iho view of the projector, showcasing the LiteTouch™ control panel with buttons for power, auto image, keystone, menu, select, volume, and source selection. The InFocus logo is centered on the top surface.
Whakaahua 5: Koki View with Adjustable Foot. An angled perspective of the projector, illustrating the front adjustable foot extended for tilt adjustment. The lens and front ventilation are visible.
Tatūnga
- Turanga: Position the projector on a stable, flat surface. Ensure adequate ventilation around the unit. Adjust the front foot to achieve the desired projection angle.
- Hononga Hiko: Connect the supplied power cord to the projector's power input socket (refer to Figure 3) and then to a grounded electrical outlet.
- Connecting a Source:
- DisplayLink™ USB: For quick setup, connect the USB (A to mini-B) cable from your computer's USB port to the "Computer 1 DisplayLink" USB port on the projector (refer to Figure 3). This eliminates the need for a separate VGA cable and simplifies configuration.
- VGA: Connect the supplied VGA cable from your computer's VGA output to either the "Computer 1" or "Computer 2" VGA input on the projector (refer to Figure 3).
- Ataata Ataata: For standard video sources, use the "Video 1" (S-Video) or "Video 2" (Composite) inputs. Connect audio using the "Audio In" port if necessary.
- Whakahiko: Press the power button on the projector's control panel (refer to Figure 4) or the remote control. The projector will initiate its startup sequence.
- Whakatikatika Arotahi: Rotate the focus ring on the projector lens until the projected image is sharp and clear.
Nga Tohutohu Whakahaere
Powering On/Off (LiteSwitch™)
The InFocus IN1102 features LiteSwitch™ technology for instant power on and off. Press the power button once to turn the projector on. To turn it off, press the power button again. There is no "cool down" period required, allowing for faster transitions between meetings.
Using the LiteTouch™ Keypad
The backlit LiteTouch™ control panel on the top of the projector (Figure 4) provides direct access to common functions:
- Pātene Hiko: Ka whakakā, whakaweto rānei te pūwhiti.
- Atahanga Aunoa: Automatically optimizes the image settings for the current input source.
- Te Tohu: Adjusts the image to correct for trapezoidal distortion if the projector is not perfectly perpendicular to the screen.
- Tahua: Accesses the on-screen display (OSD) menu for advanced settings.
- Tīpakohia: Confirms selections within the OSD menu.
- Rōrahi: Whakaritea te taumata whakaputa ororongo.
- Puna: Cycles through available input sources (Computer 1, Computer 2, Video 1, Video 2).
DisplayLink™ Connectivity
When using DisplayLink™ via USB, the projector automatically detects the connection and displays content from your computer. This technology simplifies setup by eliminating the need for complex display settings on your computer.
Image Orientation for Mounting
The InFocus IN1102 supports horizontal image flipping for rear projection setups. However, it does not include a built-in vertical image flip option for ceiling-mounted installations. If ceiling mounting is desired, third-party software on the connected computer may be required to invert the image vertically. Please consult your computer's operating system or display driver settings for this functionality.
Te tiaki
Te horoi i te Pūwhiti
- Waho: Whakamahia he kakahu ngohengohe, karekau he ngongo paku dampened with water or a mild, non-abrasive cleaner to wipe the projector's casing. Avoid harsh chemicals.
- Arotahi: Gently clean the projector lens with a lens cleaning cloth or a soft, dry, lint-free cloth. Do not use abrasive materials or excessive force.
Hoahoa Kore-Tatari
The InFocus IN1102 utilizes DLP® technology with a filter-free design, which reduces the need for regular filter cleaning or replacement, simplifying maintenance.
Raparongoā
Mēnā ka tūtaki koe i ngā take ki tō pūwhiti, tirohia ngā raruraru me ngā rongoā e whai ake nei:
- Karekau he atahanga e whakaatuhia ana:
- Me whakarite kei te whakakā te pūwhakaata, ā,amp kua whakamaramatia.
- Verify that the video cable (USB or VGA) is securely connected to both the projector and the source device.
- Press the "Source" button on the projector or remote to cycle through input sources until the correct one is selected.
- Check your computer's display settings to ensure the external display is enabled or duplicated.
- Ko te atahanga he Pupuru:
- Whakaritea te mowhiti arotahi ki runga i te arotahi kaupapa.
- Me whakarite kia papatahi te mata o te whakaata, ā, kia tika te tawhiti o te whakaata.
- Image is Trapezoidal (Wider at Top/Bottom):
- Use the "Keystone" adjustment on the control panel to correct the image shape.
- Ideally, position the projector perpendicular to the screen to minimize keystone correction.
- Kore Ororongo:
- Ensure the audio cable is connected if using VGA or video inputs. DisplayLink™ USB typically carries audio.
- Adjust the volume using the projector's controls or the remote.
- Tirohia ngā tautuhinga putanga oro i runga i tō pūrere pūtake.
For further assistance, please refer to the InFocus support webpae, whakapā atu ranei ki te ratonga kiritaki.
Whakatakotoranga
Key technical specifications for the InFocus IN1102 projector:
| Āhuahira | Whakatakotoranga |
|---|---|
| Whakatau Maori | WXGA (1280 x 800) |
| Tirohanga | 2200 ANSI Lumens (1650 lm Eco Mode) |
| Tauwehenga Purata | 1800:1 |
| Hangarau Whakaatu | DLP® me te BrilliantColor™ |
| Hononga | DisplayLink™ USB, VGA (x2), S-Video, Composite Video, Audio In |
| Taumaha Tūemi | 2.65 pauna (1.2 kg) |
| Hunga Hua | 15.75 x 7 x 10.75 inihi |
| Āhuahira Motuhake | Kaikōrero Whakakotahi |
Pūtāhui me te Tautoko
The InFocus IN1102 projector comes with the following limited warranty:
- Nga waahanga: 5 tau
- Reipa: 2 tau
- Lamp: 6 marama
For warranty claims, technical support, or additional product information, please visit the official InFocus webpaetukutuku, whakapā atu rānei ki tā rātou tari ratonga kiritaki. Puritia tō rīhiti hoko hei tohu hoko mō te whakamana i te pūtāhui.
