Draytek Vigor 3120 G.SHDSL Security Router User Manual

1. Kupu Whakataki

The Draytek Vigor 3120 is a G.SHDSL Security Router designed for reliable and secure network connectivity. It features a G.SHDSL WAN port for high-speed digital subscriber line connections, along with multiple LAN ports for local network devices. This router integrates advanced security features such as a comprehensive firewall and VPN capabilities to ensure secure and efficient network operations.

2. Aratohu Tatūnga

2.1. Ihirangi mokete

I mua i te haere tonu, kia tino mohio kei te wātea ngā wāhanga katoa:

• Draytek Vigor 3120 Router
• Pūurutau Hiko
• Tauira Itarangi
• Aratohu Timata Tere (mehemea kei roto)

2.2. Hononga Tinana

Refer to the image below for port identification on the front panel of the Vigor 3120 router.

Figure 1: Front Panel of Draytek Vigor 3120 Router. This image displays the router's front panel, highlighting the DSL port, four LAN ports, a USB port, and various LED indicators for activity, VPN, QoS, PRN, DSL link, LAN link/activity, and a reset button.

1. Hononga Hiko: Honoa te urutau hiko ki te tāuru hiko o te pouara, kātahi ki te putanga hiko.
2. WAN Connection (DSL): Connect your G.SHDSL line to the router's DSL tauranga.
3. Hononga LAN: Connect your local network devices (computers, switches, access points) to the router's LAN 1-4 tauranga.
4. Hononga USB: For 3.5G Mobile Broadband support or other USB devices, connect a compatible USB modem or device to the USB tauranga.

2.3. Whirihoranga Tuatahi

Hei uru atu ki te pouara web-atanga whakahaere i runga:

1. Me mohio kei te hono to rorohiko ki tetahi o nga tauranga LAN o te pouara.
2. Tuwhera a web pūtirotiro (hei tauira, Chrome, Firefox, Edge).
3. In the address bar, type the default IP address (commonly 192.168.1.1 or refer to the Quick Start Guide) and press Enter.
4. Enter the default username and password (typically admin mō ngā mea e rua, e ai rānei ki te aratohu).
5. Follow the on-screen wizard for initial setup, including WAN configuration and wireless settings.

3. Nga Tohutohu Whakahaere

3.1. G.SHDSL WAN Connectivity

The Vigor 3120 provides a dedicated G.SHDSL WAN port for high-speed, symmetrical digital subscriber line connections. Configure your G.SHDSL parameters, such as encapsulation mode and VPI/VCI settings, through the router's web interface under the WAN settings.

3.2. Wireless (802.11n) Configuration

The router provides 802.11n wireless connectivity. Access the "Wireless LAN" section in the web interface to:

• Set up your Wi-Fi network name (SSID).
• Configure security settings (WPA2-PSK recommended).
• Whakatikatikahia ngā tautuhinga hongere me te whānui o te hononga mō te mahi tino pai.

3.3. VPN (Virtual Private Network)

The Vigor 3120 supports various VPN protocols (e.g., IPSec, PPTP, L2TP) for secure remote access and site-to-site connections. Configure VPN tunnels via the "VPN" menu in the web atanga.

3.4. Firewall and Security

Utilize the built-in firewall to protect your network. Features include:

• Tātari Pākete
• DoS/DDoS Tiaki
• Tātari Ihirangi
• Object-based Firewall Rules

3.5. USB 3.5G Support

The USB port allows connection of a 3.5G USB modem for mobile broadband connectivity, serving as a backup or primary connection. Ensure your 3.5G modem is compatible with the Vigor 3120.

4. Tiaki

4.1. Whakahoutanga Firmware

Regularly check the Draytek website for firmware updates. Updating the firmware can improve performance, add new features, and address security vulnerabilities. Always back up your configuration before performing a firmware update.

4.2. Configuration Backup and Restore

It is recommended to back up your router's configuration settings periodically. This allows for quick restoration of your settings in case of a factory reset or hardware replacement. Access this feature in the "System Maintenance" section of the web atanga.

4.3. Cleaning and Environment

Keep the router in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Clean the exterior with a soft, dry cloth. Do not use liquid or aerosol cleaners.

5. Te Raru

5.1. Tohu LED

Ko nga rama rama o mua e whakarato ana i nga korero mana:

• MAHI: E tohu ana i te mahi a te pūnaha.
• VPN: Lit when a VPN tunnel is active.
• QoS: Indicates Quality of Service is active.
• PRN: Printer status (if USB printer connected).
• DSL: Indicates DSL line status (link/activity).
• LNK/LAN (1-4): Indicates link status and activity for each LAN port.
• tuatahi: Reset button (press and hold for factory reset).

5.2. Nga take me nga otinga noa

• Kaore he Hononga Ipurangi:
  • Check DSL cable connection.
  • Verify DSL modem/line status.
  • Ensure WAN settings in router are correct (e.g., G.SHDSL parameters).
  • Reboot DSL modem and router.
• Mahinga Whatunga Puturi:
  • Check for high bandwidth usage by devices.
  • Verify wireless channel interference.
  • Me mohio kei te hou tonu te firmware.
• Kaore e taea te uru Web Atanga:
  • Ensure computer is connected to a LAN port.
  • Verify computer's IP address is in the same subnet as the router.
  • Whakamātauria he rerekē web pūtirotiro.
  • Perform a soft reboot of the router.

If issues persist, consider performing a factory reset (note: this will erase all configurations) or contact technical support.

6. Whakatakotoranga

7. Nga Korero Whakaputanga

Draytek products typically come with a limited manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the warranty card included with your product or visit the official Draytek webpae. Puritia to tohu hoko mo nga kereme whakamana.

8. Tautoko Hangarau

For technical assistance, product inquiries, or advanced configuration guidance, please contact Draytek technical support:

• Whaimana Webpae: Haerenga www.draytek.com for support resources, FAQs, firmware downloads, and contact information.
• Tautoko Aipurangi: Many regions offer online ticketing systems or email support.
• Tautoko Waea: Check the Draytek webpae tukutuku mō ngā nama tautoko waea ā-rohe.

When contacting support, have your product model (Vigor 3120 / VIGOR3120) and serial number ready.