1. Kupu Whakataki
Thank you for choosing Moen. This manual provides detailed instructions for the installation, operation, and maintenance of your Moen T2701BN Level Posi-Temp Valve Trim Kit. This trim kit is designed to complement the modern aesthetic of your bathroom while providing reliable temperature and flow control. Please read these instructions carefully before beginning installation to ensure proper function and to avoid damage.
2. Nga korero haumaru
- Whakawetohia te puna wai matua i mua i te tiimata i nga mahi paipa.
- Me mau ngā taputapu tiaki whaiaro e tika ana, pērā i ngā mōhiti haumaru, i te wā e tāuta ana.
- Mena kaore koe i te tino mohio mo tetahi waahanga o te mahi whakaurunga, me toro atu ki tetahi tohunga paipa.
- Me whakarite kia mau nga hononga katoa kia kore ai e pakaru.
- This trim kit requires a compatible Moen Posi-Temp pressure-balancing valve (kaore i whakauruhia). Ensure you have the correct valve body installed (e.g., 2510, 2590, 2570, or 2520 series).
3. Ihirangi mokete
Manatokohia kei te noho nga waahanga katoa i mua i te whakaurunga:
- Kohinga Kaihuri
- Escutcheon Plate (Wall Plate)
- Handle Adapter/Mechanism
- Mounting Hardware (screws, gaskets)
- Aratohu Tāuta (tenei tuhinga)
Tuhipoka: The Posi-Temp pressure-balancing valve body is sold separately and is not included with this trim kit.
This image displays the Moen T2701BN Level Posi-Temp Valve Trim Kit, featuring its single lever handle and escutcheon plate in a brushed nickel finish. The design is modern and sleek, intended for shower or tub installations.
4. Utauta e hiahiatia ana
- Wrench Whakaritea
- Phillips Head Tiwiri
- Hex Wrench (size may vary, typically 7/64 inch or 3/32 inch, refer to specific valve instructions)
- Plumber's Putty or Silicone Sealant (optional, for escutcheon plate)
- Kaka horoi
5. Tohutohu Tāuta
These instructions assume a compatible Moen Posi-Temp valve body is already installed in the wall. Refer to the valve body's specific installation manual for rough-in details.
- Whakapaia te Valve: Ensure the water supply to the valve is turned off. Remove any existing trim components.
- Install the Escutcheon Plate: Position the escutcheon plate over the valve body opening. Ensure the plate is level. Secure it to the wall using the provided screws. Do not overtighten. For a watertight seal, a thin bead of silicone sealant can be applied around the perimeter of the plate before securing.
- Install the Handle Adapter: Slide the handle adapter onto the valve stem. Ensure it is properly seated.
- Āpitihia te Kakau: Place the lever handle onto the handle adapter. Secure the handle to the adapter using the small set screw, typically located on the underside of the handle. Use the appropriate hex wrench.
- Whakamātautau mō ngā turuturu me te mahi: Turn the main water supply back on. Slowly open the valve by moving the handle. Check for any leaks around the escutcheon plate and handle. Verify that the handle rotates smoothly to control temperature and flow.
6. Nga Tohutohu Whakahaere
The Moen T2701BN Level Posi-Temp Valve Trim Kit features a single lever handle for controlling both water temperature and flow.
- Whakakā/Weto: Rotate the handle away from the wall to turn on the water. Rotate it back towards the wall to turn off the water.
- Whakaritea te Mamahana: Rotate the handle counter-clockwise for warmer water and clockwise for cooler water. The Posi-Temp valve maintains consistent water temperature even with pressure fluctuations in the water supply.
- Whakatika Rere: The flow rate is controlled by how far the handle is rotated away from the wall.
7. Tiaki
To maintain the beautiful finish of your Moen T2701BN trim kit, follow these cleaning guidelines:
- Horoi ki te ngohengohe, damp kakahu.
- Use only mild soap and water.
- Avoid abrasive cleaners, harsh chemicals, or polishes, as these can damage the brushed nickel finish and void the warranty.
- Regular cleaning will help prevent water spots and mineral buildup.
8. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Water leaks from handle or escutcheon. | Loose connections, damaged O-rings/gaskets, improper installation. | Ensure all screws are tightened. Check for proper seating of gaskets. If leaks persist, the valve cartridge may need inspection or replacement (refer to valve body manual). |
| No water or low water flow. | Main water supply off, debris in valve, clogged aerator (if applicable to showerhead/spout). | Check main water supply. Consult valve body manual for cartridge inspection. |
| Temperature difficult to adjust or inconsistent. | Valve cartridge issue, temperature limit stop setting. | Refer to the Posi-Temp valve body manual for instructions on adjusting the temperature limit stop or inspecting the cartridge. |
9. Whakatakotoranga
- Tau tauira: T2701BN
- Waitohu: Moen
- Mutu: Nika paraihe
- Rauemi: Brass (handle), Nickel (finish)
- Te maha o nga Kakau: 1
- Momo Whakapuru: Maunga Taiepa
- Compatible Valve: Moen Posi-Temp Pressure-Balancing Valve (sold separately)
- Taumaha Tūemi: Tata ki te 1.3 Pauna
10. Nga Korero Whakaputanga
Moen products are manufactured under the highest standards of quality and workmanship. Moen offers a limited lifetime warranty to the original consumer purchaser against leaks, drips, and finish defects for as long as the original consumer purchaser owns their home. Other components are warranted for a period of one year from the date of purchase. For complete warranty details, please visit the official Moen website or contact Moen customer service.
11. Tautoko me te Whakapā
If you require further assistance or have questions regarding your Moen T2701BN Level Posi-Temp Valve Trim Kit, please contact Moen customer support:
- Webpae: www.moen.com
- Waea: Refer to the Moen webpae mo nga tau whakapā a rohe.
Please have your model number (T2701BN) and date of purchase available when contacting support.
