Kupu Whakataki
This manual provides essential instructions for the installation, operation, and maintenance of the SAMSUNG DA97-07549B Ice Maker Assembly. This genuine OEM part is designed to replace a faulty ice maker in compatible Samsung refrigerators, ensuring proper ice production. Please read this manual thoroughly before proceeding with installation or use.
Nga korero haumaru
- Momotu Mana: Always disconnect the appliance from all utilities (unplug the refrigerator) before attempting any installation, repair, or maintenance. Failure to do so can result in electric shock or injury.
- E taunakitia ana te whakaurunga ngaio: If you are not comfortable with appliance repair, it is recommended to seek assistance from a qualified technician.
- Ka mau i nga taputapu tiaki: Use appropriate personal protective equipment, such as gloves, during installation to prevent injury.
- Te hapai me te tiaki: The ice maker assembly contains delicate components. Handle it carefully to avoid damage.
Ka mutu te huaview
The SAMSUNG DA97-07549B Ice Maker Assembly is a genuine Original Equipment Manufacturer (OEM) replacement part. It includes the ice mold and the control device, featuring a 12-wire electrical connection. This assembly is crucial for the automatic production and dispensing of ice in your Samsung refrigerator.
Whakaahua 1: SAMSUNG DA97-07549B Ice Maker Assembly. This image shows the complete ice maker unit, including the ice mold, control device, and the yellow 12-wire electrical connector on the left side.
Tohutohu Tāuta
The following steps outline the general procedure for replacing the ice maker assembly. Specific refrigerator models may vary, so consult your refrigerator's service manual if available.
- Whakaritea mo te Tāuta:
- Unplug the refrigerator from the electrical outlet to ensure no power is supplied to the unit.
- Whakawetohia te puna wai ki te pouaka whakamātao.
- Empty the ice bin and remove any existing ice.
- Access the Old Ice Maker:
- Locate the ice maker compartment, typically in the freezer section.
- Depending on your model, you may need to remove shelves or other components to gain access.
- Remove the Old Ice Maker:
- Carefully disconnect the electrical connector from the old ice maker. Note its orientation.
- Unscrew any mounting screws holding the ice maker in place. There are typically 2-3 screws.
- Gently slide or pull the old ice maker assembly out of its position.
- Install the New Ice Maker:
- Align the new SAMSUNG DA97-07549B Ice Maker Assembly with the mounting brackets.
- Secure the new ice maker with the mounting screws. Ensure it is firmly in place.
- Connect the 12-wire electrical connector to the new ice maker, ensuring a secure fit.
- Hipanga Whakamutunga:
- Replace any shelves or components that were removed.
- Whakakāhia te puna wai ki te pouaka whakamātao.
- Whakahokia te pouaka whakamātao ki te putanga hiko.
Nga Tohutohu Whakahaere
After installation, the ice maker will begin its cycle automatically. It may take several hours for the freezer compartment to reach the optimal temperature for ice production.
- Hanga Hukapapa Tuatahi: The first batch of ice may take 12-24 hours to produce.
- Discard First Batches: It is recommended to discard the first 1-2 batches of ice to flush out any potential manufacturing residues from the water lines and the new ice maker.
- Patene Tautuhi Anō: Some models may have a reset button on the ice maker. If ice production does not start after several hours, locate and press the reset button (often a small blue button) for a few seconds.
- Ice Level Sensor: The ice maker has a sensor that detects the ice level in the bin. When the bin is full, the ice maker will stop producing ice until the level drops.
Te tiaki
- Whakapai auau: Periodically clean the ice bin and the exterior of the ice maker with a mild soap and water solution. Ensure the refrigerator is unplugged before cleaning.
- Tātari wai: Me whakarite kia whakakapihia te tātari wai o to pouaka pouaka kia rite ki nga tohutohu a te kaihanga kia mau tonu te kounga o te wai me te aukati i te hanga kohuke i roto i te hanga hukapapa.
- Tirotiro mo nga turuturu: Occasionally check for any signs of water leaks around the ice maker or water lines.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Karekau he mahi tio |
|
|
| Te hanga tio puhoi |
|
|
| Clicking sound from ice maker |
|
|
If these troubleshooting steps do not resolve the issue, contact Samsung customer support or a qualified appliance technician.
Whakatakotoranga
| Waitohu | Samsung |
| Tau tauira | DA97-07549B |
| Hunga Hua | 6"D x 10"W x 4"H |
| Taumaha Tūemi | 2 pauna |
| Wattage | 140 watts |
| Hononga hiko | 12-waea |
| Nga Waahanga kei roto | Huihuinga Kaihanga Tio |
Pūtāhui me te Tautoko
This SAMSUNG DA97-07549B Ice Maker Assembly is a genuine Samsung part. For specific warranty information regarding replacement parts, please refer to your original appliance's warranty documentation or contact Samsung customer support directly. Warranty coverage for replacement parts may be tied to the original appliance's purchase date and warranty period.
For technical assistance or further inquiries, please visit the official Samsung support webpaetukutuku, whakapā atu ranei ki ta raatau ratonga kaihoko.
Tautoko Samsung: www.samsung.com/us/support/
