1. Kupu Whakataki
This manual provides instructions for the installation, operation, and maintenance of your StarTech.com 8 Outlet Horizontal 1U Rack Mount PDU Power Strip (Model RKPW081915). This Power Distribution Unit (PDU) is designed to provide reliable power distribution and surge protection for equipment within network server racks and cabinets.
2. Nga korero haumaru
WHAKATŪPATO: Ki te kore e whai i ēnei tohutohu haumaru, ka pāngia pea koe e te ahi, te ru hiko, ētahi atu whara, kino rānei.
- Pānuihia nga tohutohu katoa i mua i te whakahaere i te hua.
- Ko tenei hua te tikanga mo te whakamahi o roto anake.
- Ensure the PDU is properly grounded. Do not use with ungrounded outlets.
- Do not exceed the maximum electrical rating of 120V/15A. Overloading the PDU can cause damage and fire hazards.
- Do not disassemble or modify the PDU. Refer all servicing to qualified personnel.
- Keep away from water or excessive humidity.
- Do not plug one PDU into another.
3. Ihirangi mokete
Image: The StarTech.com PDU and its instruction manual, as typically found in the product packaging.
- 1x 8 Outlet Horizontal 1U Rack Mount PDU Power Strip (RKPW081915)
- 1x Manual Tohutohu
4. Hua Neke Atuview
The StarTech.com RKPW081915 is a 1U horizontal rack-mountable PDU designed for efficient power distribution in server environments. It features 8 NEMA 5-15R outlets, a 6-foot power cord, and built-in surge protection.
Nga waahanga o mua
Whakaahua: Taipitopito view of the PDU's front and back, highlighting the LED indicators, power switch, and outlets.
- LED Surge Indicator: Illuminates when surge protection is active.
- LED Ground Indicator: Illuminates when the PDU is properly grounded.
- Power/Reset Switch: Controls power to all outlets and acts as a circuit breaker reset.
Ngā Āhuatanga Paewhiri Whakamuri
- 8 x NEMA 5-15R Outlets: Provides power connections for your equipment.
- Waea Hiko 6ft kua whakakotahi: Connects the PDU to a power source.
Image: Close-up of the rear of the PDU, displaying the eight power outlets and the attached power cord.
5. Tatūnga
5.1 Te Wetewete
Carefully remove the PDU and all components from the packaging. Inspect for any damage during shipping. If any damage is found, contact your vendor immediately.
5.2 Whakapiki Rack
The RKPW081915 PDU is designed for horizontal mounting in any standard 19-inch server rack that is 4 inches (10.16 cm) deep or greater. It occupies 1U of rack space.
- Align the mounting ears of the PDU with the desired rack unit (U) on your server rack.
- Secure the PDU to the rack using appropriate rack screws (not included). Ensure both sides are firmly attached.
Image: The PDU mounted horizontally within a server rack, demonstrating its 1U form factor and integration with other equipment.
Image: A visual representation of the PDU's height (1U) and cable length (6ft), confirming its compatibility with standard 19-inch racks.
5.3 Hononga Pūrere
- Ensure the PDU's power/reset switch is in the OFF position.
- Plug the power cords of your network and server equipment into the 8 NEMA 5-15R outlets on the rear of the PDU.
- Connect the integrated 6-foot power cord of the PDU to a grounded 120V/15A power source.
Video: Demonstrates the installation of a rack-mounted power strip, showing how it integrates into a server rack and connects to devices.
Video: An official product video from StarTech.com showcasing the 8 Outlet Horizontal 1U Rack Mount PDU Power Strip for network server racks, highlighting its surge protection features.
Video: A demonstration of the StarTech 8 Outlet Horizontal 1U Rack Mount PDU, showing its physical attributes and how it fits into a rack setup.
Ataata: Kua mutuview of an 8 Outlet Rack-Mount PDU, detailing its features and benefits for organizing power in a rack system.
Video: A demonstration of a PDU Outlet Horizontal, highlighting its design and functionality for power distribution.
6. Nga Tohutohu Whakahaere
6.1 Kei te Hiko / Weto
To power on the connected equipment, press the Power/Reset switch on the front panel to the ON position. To power off, press the switch to the OFF position.
6.2 Tohu LED
- Surge LED (Green): When illuminated, it indicates that the surge protection feature is active and functioning. If this LED is off, the surge protection has been compromised, and the unit should be replaced.
- Ground LED (Green): When illuminated, it indicates that the PDU is properly grounded. If this LED is off, there may be a grounding issue with your power source or the PDU itself.
6.3 Kaiwhati iahiko
The Power/Reset switch also functions as a circuit breaker. If an overload occurs, the switch will trip to the OFF position, cutting power to all connected devices to prevent damage. To reset the circuit breaker, reduce the load on the PDU and then press the switch back to the ON position.
7. Tiaki
7.1 Te horoi
To clean the PDU, ensure it is powered off and disconnected from the main power source. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
7.2 Tirotiro auau
- Periodically check the Surge and Ground LEDs to ensure they are illuminated, indicating proper function and grounding.
- Inspect the power cord and connected device cords for any signs of damage or wear.
- Me whakarite kia mau nga hononga katoa.
8. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore he mana ki nga taputapu hono. | PDU is off or circuit breaker tripped. | Ensure the Power/Reset switch is ON. If it tripped, reduce the load and reset the switch. |
| Ground LED is off. | Te taunga hē. | Ensure the PDU is plugged into a properly grounded outlet. Check the building's electrical wiring. |
| Surge LED is off. | Kua ngoikore te parenga ngaru. | The PDU's surge protection may no longer be active. Replace the unit to ensure continued protection. |
| Devices are not receiving enough power. | PDU is overloaded. | Reduce the total power draw of connected devices to stay within the 15A limit. |
9. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | RKPW081915 |
| Waitohu | StarTech.com |
| Nga Putanga Hiko Katoa | 8 x NEMA 5-15R |
| Whakauru Voltage | 120 Volts AC |
| Whakatauranga o naianei | 15 Amps |
| Te Roa Waea Hiko | 6 putu (1.8 mita) |
| Rack Unit (RU) | 1U |
| Whakaeke | Horizontal 19-inch Rack Mount |
| Ahu (LxWxH) | 19 x 3.76 x 1.68 inihi (48.26 x 9.55 x 4.27 cm) |
| Taumaha Tūemi | 4.85 pauna (2.2 kg) |
| Nga waahanga motuhake | Mountable, On/Off Switch, Surge Protection, Built-in Circuit Breaker |
| Casing Rauemi | Rugged Steel |
10. Pūtāhui me te Tautoko
This StarTech.com product is backed by a lifetime warranty, ensuring long-term reliability and peace of mind. In addition, free lifetime 24/5 multi-lingual technical assistance is available to help you with any questions or issues you may encounter.
For technical support or warranty claims, please visit the official StarTech.com webpaetukutuku, whakapā atu ranei ki ta raatau ratonga kaihoko. Puritia to riirii hoko mo te whakamanatanga whakamana.
