1. Kupu Whakataki
The Elation Professional SDC-6 v2 is a compact and versatile 6-channel DMX controller designed for easy operation of DMX-compatible lighting fixtures. It features six individual channel faders and one master fader, providing intuitive control over various lighting effects. This manual provides essential information for the safe and efficient use of your SDC-6 v2 controller, including setup, operation, maintenance, and troubleshooting.
2. Nga Tohutohu Haumaru
Please read these safety instructions carefully before operating the device. Failure to comply may result in damage to the unit, property, or personal injury.
- Me hono tonu te taputapu ki tetahi putanga hiko kua oti te tu.
- Ensure the power adapter's voltage ōrite ana ki te tuku hiko o te rohe.
- Kaua e tukuna te waeine ki te ua, te makuku, te makuku nui ranei.
- A ape i te whakanoho i te waeine ki te taha o nga puna wera, ki te ra tika ranei.
- Kaua e whakahaerehia te waeine mēnā kua pakaru te taura hiko.
- Refer all servicing to qualified service personnel. There are no user-serviceable parts inside.
- Momotuhia te hiko i mua i te horoi, te mahi tiaki ranei.
3. Ihirangi mokete
Me manatoko kei te wātea ngā taonga katoa kua whakarārangihia i raro nei, ā, kei roto i te āhua pai i te wā e whakatuwherahia ai te kete:
- Elation Professional SDC-6 v2 DMX Controller
- 9V Turuturutanga Hauora
- Pukapuka Kaiwhakamahi (tenei tuhinga)
4. Tatūnga
Follow these steps to set up your SDC-6 v2 DMX controller:
- Turanga: Place the controller on a stable, flat surface away from excessive heat, moisture, or dust.
- Hononga DMX: Connect the 3-pin DMX output connector of the SDC-6 v2 to the DMX input of your first DMX-compatible lighting fixture. If you have multiple fixtures, daisy-chain them by connecting the DMX output of the first fixture to the DMX input of the second, and so on.
- Hononga Hiko: Insert the 9V power adapter into the power input jack on the controller. Plug the power adapter into a suitable electrical outlet. The power indicator LED on the controller should illuminate.
Whakaahua 4.1: Runga view of the Elation SDC-6 v2 DMX Controller, showing the six channel faders, master fader, and power indicator.
Whakaahua 4.2: Taha view of the Elation SDC-6 v2 DMX Controller, illustrating the battery compartment for optional portable power (battery not included for primary operation).
5. Nga Tohutohu Whakahaere
The SDC-6 v2 provides straightforward control over your DMX lighting fixtures.
5.1. Channel Faders (1-6)
Each of the six numbered faders (1 through 6) corresponds to a DMX channel. Moving a fader up increases the DMX value for that channel (from 0 to 255), while moving it down decreases the value. The specific function of each channel (e.g., dimmer, color, strobe) depends on the DMX address and mode settings of your connected lighting fixture.
5.2. Master Fader
The Master fader controls the overall output level of all active DMX channels. Moving the Master fader down will dim or turn off all lights controlled by the individual channel faders, regardless of their individual settings. Moving it up will restore the output to the levels set by the individual channel faders.
5.3. Tohu Mana
The Power indicator LED illuminates when the unit is receiving power, indicating it is ready for operation.
6. Tiaki
Proper maintenance ensures the longevity and reliable operation of your SDC-6 v2 controller.
- Te horoi: Use a soft, dry cloth to wipe the exterior of the unit. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Rokiroki: When not in use for extended periods, store the controller in a cool, dry place, protected from dust and extreme temperatures.
- Mana: Always disconnect the power adapter when the unit is not in use or before cleaning.
7. Te Raru
If you encounter issues with your SDC-6 v2 controller, refer to the following common problems and solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore he rama tohu hiko | Power adapter not connected or faulty; power outlet not active. | Ensure power adapter is securely connected to the unit and a working outlet. Test the outlet with another device. |
| Lights not responding to faders | Incorrect DMX connection; Master fader is down; DMX address mismatch on fixtures; fixture not in DMX mode. | Check DMX cable connections. Ensure Master fader is up. Verify DMX addresses on fixtures match the channels being controlled. Confirm fixtures are set to DMX mode. |
| Intermittent control | Loose DMX cable connection; DMX signal interference. | Secure all DMX cable connections. Use high-quality DMX cables. Avoid running DMX cables parallel to power cables. |
8. Whakatakotoranga
| Tauira | SDC6 |
| Waitohu | Elation Professional (ADJ) |
| Nga hongere | 6 DMX Channels + 1 Master Fader |
| Tuhono DMX | 3-pin XLR DMX Output |
| Tuku Hiko | 9V DC (via included power adapter) |
| Ahu (L x W x H) | 173 mm x 153 mm x 55 mm (6.81 in x 6.02 in x 2.17 in) |
| Taumaha | 1 kg (2.2 lbs) |
| Tae | Pango |
| Whenua Taketake | Haina |
9. Pūtāhui me te Tautoko
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Elation Professional webpae. Puritia to tohu hoko mo nga kereme whakamana.
For further assistance, you may contact the seller or manufacturer directly. Contact details are typically available on their respective websites or on your purchase invoice.
