BONECO Air-O-Swiss 7147 Ultrasonic Humidifier Instruction Manual

1. Kupu Whakataki me Nekeview

The BONECO Air-O-Swiss 7147 Ultrasonic Humidifier is designed to provide optimal humidification for both office and home environments. This unit features an integrated hygrostat for automatic humidity adjustment, variable mist control, and a double jet nozzle for efficient mist distribution. Key features include a multifunction digital display, programmable hygrostat, three performance levels, a Sleep Mode for quiet night-time operation, and a timer function.

Āhuatanga matua:

• High Output: Up to 3 gallons/24 hours for rooms up to 600 sq ft.
• Auto Mode for fully automated operation.
• Whisper-quiet operation.
• Optional warm or cool mist.
• Digital display and programmable hygrostat.

The humidifier is shown in a typical room environment, placed on a table, indicating its compact size and how it blends into home or office decor while operating.

Ka mutu te huaview Ataata:

2. Nga Tohutohu Haumaru

Please read and follow all safety instructions before operating the humidifier to prevent injury or damage.

• Always place the humidifier on a firm, flat, water-resistant surface at least 3 feet away from walls and heat sources.
• Kaua e rumakina te waahanga o raro ki te wai me etahi atu wai ranei.
• Unplug the unit before filling, cleaning, or performing any maintenance.
• Kaua e whakahaeretia te whakamahana ma te taura kua pakaru, te mono ranei.
• Kaua e taea e nga tamariki me nga kararehe.
• Use only clean, cool tap water. Distilled or demineralized water is recommended to reduce white dust.
• Kaua e tāpirihia ngā hinu kakara, ngā tāpiringa rānei ki roto i te tāke wai, i te turanga rānei, nā te mea ka kino pea te taputapu, ā, ka whakakorea te pūtāhui.
• Ensure the water tank cap is securely tightened before placing it on the base.

3. Tatūnga

Follow these steps for initial setup of your BONECO Air-O-Swiss 7147 Humidifier:

1. Wewete: Me ata tango i nga taonga kapi katoa me te whakarite kei te noho katoa nga waahanga.
2. Turanga: Place the humidifier on a level, stable surface. Ensure it is not directly on carpet or near sensitive electronics.
3. Tango Taaka Wai: Lift the water tank from the base unit.
4. Whakakihia te Taaka Wai: Unscrew the tank cap and fill the tank with clean, cool tap water. For best results and to minimize white dust, use distilled or demineralized water. Securely screw the cap back on.
5. Kōkuhu Kaata Whakawhanaungatanga: Ensure the demineralization cartridge is properly seated in the base unit. This cartridge helps reduce mineral content in the water.
6. Place Water Tank: Carefully place the filled water tank back onto the base unit.
7. Hono Hono: Plug the power cord into a suitable electrical outlet. The unit will beep, and the display will illuminate.

This image shows the BONECO Air-O-Swiss 7147 Ultrasonic Humidifier with its water tank lifted, revealing the demineralization cartridge in the base unit. This cartridge helps reduce mineral deposits.

4. Mahi

The BONECO Air-O-Swiss 7147 offers various settings for personalized humidification.

Paewhiri Mana:

He taipitopito view of the humidifier's control panel, featuring a digital display showing the current humidity level and various function buttons for mist output, auto mode, sleep mode, and warm mist.

• Pātene Hiko: Pēhia ki te whakakā i te waeine ki te ON, ki te OFF ranei.
• Tautuhinga haumākū: Use the humidity button to set your desired relative humidity level (e.g., 40% to 60%). The unit will automatically maintain this level.
• Taumata Putanga Kohu: Adjust the mist output intensity (low, medium, high) using the dedicated button.
• Mahi Kohu Mahana: Press the warm mist button to activate the pre-heating function for a comfortable warm mist.
• Aratau Auto: Select Auto Mode for fully automated operation. The humidifier will adjust its output to maintain an optimal humidity level based on the ambient temperature.
• Aratau Moe: Activates a low-noise operation mode, ideal for night-time use. The display brightness may also be reduced.
• Taumahi Matawā: Set a timer for the humidifier to operate for a specific duration before automatically turning off.

This image illustrates the humidifier actively releasing mist from its double jet nozzle, demonstrating its humidification function.

5. Tiaki

Regular maintenance ensures optimal performance and longevity of your humidifier. Always unplug the unit before cleaning.

Tiaki ia rā:

• Whakakīa anō te tāke wai ki te wai māori.
• Horoia te taha waho o te waeine ki te wai ngohengohe,amp kakahu.

Tiaki ia wiki:

• Horoia te Taaka Wai: Remove the water tank, unscrew the cap, and rinse thoroughly with warm water. Use a soft brush if necessary to remove any residue.
• Clean the Base Unit: Empty any remaining water from the base. Wipe the inside of the base with a soft cloth. Pay attention to the ultrasonic membrane and ensure it is free of mineral deposits.
• Te whakakorikori: Use a descaling solution (such as BONECO EZCal or Urnex DEZcal) to remove mineral buildup from the ultrasonic membrane and heating element (if using warm mist). Follow the descaling product's instructions carefully.
• Hydro Cell: Rinse the Hydro Cell under running water. Replace the Hydro Cell every 1-2 months, depending on water quality and usage.
• Kaata Whakakotahitanga: Replace the demineralization cartridge every 2-3 months, or when white dust becomes noticeable. You can also refill the cartridge with demineralization granules.

Note: Do not use harsh chemicals, abrasive cleaners, or metal tools for cleaning, as these can damage the unit.

6. Te Raru

If you encounter issues with your humidifier, refer to the following common problems and solutions:

• Kore Putanga Kohu:
  • Tirohia mehemea kei te putua te puna wai. Whakakiia ano mehemea e tika ana.
  • Ensure the water tank is correctly seated on the base.
  • Clean the ultrasonic membrane. Mineral buildup can obstruct mist production.
  • Verify the unit is plugged in and powered on.
• Excessive White Dust:
  • This indicates high mineral content in your water. Use distilled or demineralized water.
  • Replace or refill the demineralization cartridge.
• Haruru rereke:
  • Me whakarite kei runga te waeine i runga i te mata papatahi, pumau.
  • Check for any foreign objects in the water tank or base.
  • A slight bubbling sound is normal as water flows from the tank to the base.
• Paheke wai:
  • Ensure the water tank cap is securely tightened.
  • Check for cracks or damage to the water tank or base.
  • Kaua e whakakiia te taika wai ki tua atu i te raina whakakī morahi.
• He Panui Haumaama Kore:
  • Ensure the humidifier is not placed too close to a wall, window, or another heat/cold source, which can affect sensor readings.
  • Clean the humidity sensor (refer to the detailed manual for location).

If the problem persists after trying these solutions, please refer to the warranty and support section.

7. Whakatakotoranga

Technical details for the BONECO Air-O-Swiss 7147 Ultrasonic Humidifier:

A table detailing the technical specifications of the humidifier, including electrical voltage, power consumption, humidity output, suitable room size, dimensions, weight, noise level, and included accessories.

8. Pūtāhui me te Tautoko

The BONECO Air-O-Swiss 7147 Ultrasonic Humidifier comes with a 3-tau pūtāhui. Ka hipokina e tēnei pūtāhui ngā hapa o ngā rauemi me te mahi toi i raro i te whakamahinga o te whare noa.

For warranty claims, technical assistance, or to purchase replacement parts and accessories, please contact BONECO customer support. Keep your proof of purchase for warranty validation.