Connects2 CT20VX04 Harness Adapter Instruction Manual for Vauxhall Astra H, Corsa C, Vectra C

1. Kupu Whakataki

This instruction manual provides comprehensive guidance for the safe and correct installation of the Connects2 CT20VX04 Harness Adapter. This adapter is designed to facilitate the installation of an aftermarket car stereo into specific Vauxhall vehicles, ensuring proper power, speaker, and antenna connections, including phantom power for the original Fakra antenna system.

2. Nga korero haumaru

Always disconnect the vehicle's negative battery terminal before beginning any electrical installation to prevent short circuits and electrical damage.
Ensure all connections are secure and properly insulated to avoid electrical shorts.
If you are unsure about any part of the installation process, consult a qualified automotive electrician.
Do not modify the harness adapter. Unauthorized modifications can lead to malfunction or damage.
Tiakina te hua mai i te makuku me te wera nui.

3. Ihirangi mokete

Me manatoko kei te wātea ngā wāhanga katoa i mua i te tāutanga:

Connects2 CT20VX04 Harness Adapter (Main Unit)
Fakra Antenna Adapter with Phantom Power Supply
Vehicle-Specific ISO Connector

Connects2 CT20VX04 Harness Adapter showing the main wiring loom with ISO and Fakra connectors.

Whakaahua 1: The Connects2 CT20VX04 Harness Adapter. This image displays the primary wiring loom, including the vehicle-specific ISO connector for power and speakers, and the Fakra antenna adapter with its integrated phantom power supply.

4. Hototahi

The Connects2 CT20VX04 Harness Adapter is compatible with the following Vauxhall vehicle models from 2004 onwards:

Vauxhall Astra H (2004 onwards)
Vauxhall Corsa C (2004 onwards)
Vauxhall Vectra C (2004 onwards)
Vauxhall Tigra (2004 onwards)

Tuhipoka: Vehicle compatibility may vary based on specific trim levels or factory-fitted options. Always verify the existing wiring harness in your vehicle matches the adapter's connectors before installation.

5. Tatūnga me te Tāuta

Follow these steps carefully to install the harness adapter:

Whakapaia te Waka: Ensure the vehicle's ignition is off. Disconnect the negative terminal of the car battery to prevent electrical shorts during installation.
Tangohia te Upoko o te Pūnaha: Carefully remove the factory-fitted car stereo from the dashboard. Refer to your vehicle's service manual for specific removal instructions.
Connect Power/Speaker Harness: Locate the vehicle's factory wiring harness. Connect the vehicle-specific ISO connector from the CT20VX04 adapter to the corresponding connector in your vehicle. Ensure a firm and secure connection.
Hononga Pūihi: Locate the vehicle's Fakra antenna connector. Connect the Fakra antenna adapter from the CT20VX04 to the vehicle's antenna cable. The adapter includes a phantom power supply, which is essential for active (amplified) factory antennas to function correctly with an aftermarket head unit.
Hono atu ki te Wāhanga Matua o te Aftermarket: Connect the ISO and DIN antenna connectors from the CT20VX04 adapter to the corresponding ports on your new aftermarket car stereo.
Hononga Whakamatau: Before fully reassembling the dashboard, reconnect the vehicle's negative battery terminal. Turn on the ignition and test the new head unit's functionality, including power, audio output from all speakers, and radio reception.
Whakapūmautia, ā, Huihui Anō: Once all functions are verified, disconnect the battery again. Secure all wiring to prevent rattles or damage. Carefully reinstall the aftermarket head unit and reassemble the dashboard components. Reconnect the battery.

6. Nga Tohutohu Whakahaere

The Connects2 CT20VX04 Harness Adapter is a passive component designed to facilitate the connection of an aftermarket head unit. Once correctly installed, its operation is integrated with the functionality of your new car stereo. Refer to your aftermarket head unit's instruction manual for specific operating procedures.

7. Tiaki

The CT20VX04 Harness Adapter requires minimal maintenance. Periodically, if you experience issues, you may:

Tirohia nga hononga katoa mo te piri me te waikura.
Ensure wiring is not pinched or damaged.

No user-serviceable parts are contained within the adapter. Do not attempt to open or repair the unit.

8. Te Raru

Raruraru	Take pea	Rongoā
No power to aftermarket head unit.	Hononga hiko wetewete. Te pūngao pakaru i roto i te waka, i te waeine upoko rānei. Waea hape.	Check all power connections on the harness and to the head unit. Inspect vehicle and head unit fuses; replace if necessary. Verify wiring against vehicle and head unit diagrams.
Karekau he oro mai i nga kaikorero.	Ngā hononga pūoro ngoikore. He hē te waea o te kaikorero. Head unit settings.	Check all speaker connections on the harness and to the head unit. Ensure correct polarity and connections. Verify fader/balance settings on the head unit.
Karekau he reo irirangi karekau ranei.	Antenna adapter not connected. Phantom power not supplied to active antenna. Damaged antenna cable.	Ensure the Fakra antenna adapter is securely connected. Verify the phantom power wire (usually blue) from the adapter is connected to the head unit's antenna remote output. Inspect the vehicle's antenna cable for damage.

9. Whakatakotoranga

Tau tauira	CT20VX04
Waitohu	Tūhono2
Hototahi	Vauxhall Astra H, Corsa C, Vectra C, Tigra (2004 onwards)
Momo Tuhono	Vehicle-specific ISO, Fakra Antenna, DIN Antenna
Rauemi	Acrylonitrile Butadiene Styrene (ABS)
Taumaha Tūemi	3.88 hekere (110 Karamu)
Ahu mōkihi	11.81 x 5.39 x 2.01 inihi

10. Pūtāhui me te Tautoko

Connects2 products are designed for reliability and performance. For warranty information or technical support, please refer to the official Connects2 webpaetukutuku, whakapā atu rānei ki tō kaihokohoko whai mana. Puritia tō taunakitanga hoko mō ngā kereme pūtāhui katoa.

	Connects2 CTKIZ04: Aratohu Kete Tāutanga Katoa o Isuzu D-Max Kei roto i tēnei aratohu ngā tohutohu taahiraa-i-te-taahiraa mō te tāuta i te kete Connects2 CTKIZ04 ki ngā waka Isuzu D-Max (2020 haere tonu). E whakamārama ana me pēhea te whakauru i te fascia, te hono i ngā waea, me te pupuri i te mahi whakahaere o te wira urungi ina tāuta ana i tētahi waeine upoko hokohoko-muri.
	Connects2 CTKFT32 Complete Installation Kit for Fiat Ducato Vehicles This Connects2 CTKFT32 installation kit is designed for Fiat Ducato (X290) vehicles manufactured between 2014 and 2021. It facilitates the installation of a double DIN aftermarket stereo, while preserving essential vehicle functions such as steering wheel controls, vehicle settings menus, and parking sensor graphics. The kit includes a fascia adapter, brackets, vehicle interface, harness, antenna adapter, and universal patch lead for seamless integration. Detailed installation instructions and wiring diagrams are provided.
	Connects2 CTKFT34 Complete Installation Kit for Fiat Ducato (8 Series) - Installation Guide Comprehensive installation guide for the Connects2 CTKFT34 kit, enabling the fitment of an aftermarket double DIN head unit into Fiat Ducato (8 Series) vehicles (2021-UP). Includes kit contents, application details, features, wiring key, interface connections, steering wheel control functions, installation steps for fascia and wiring, and Infodapter menu configuration.
	Kete Tāutanga Connects2 CTKFT31 mō Fiat Ducato (Raupapa 8) Kete tāutanga katoa mō te whakauru i tētahi wae matua hokohoko ki roto i te papaaho OEM o ngā waka Fiat Ducato (8 Raupapa). Kei roto ko te anga, ngā whāriki, te atanga wira urungi, me ngā waea hei whakauru maeneene.
	Connects2 QUADCAN Universal ISO Harness Installation Guide for CAN-Bus Vehicles Detailed installation guide for the Connects2 QUADCAN Universal ISO Harness, enabling aftermarket stereo installation in select CAN-Bus vehicles with Quadlock connectors. Includes wiring key, DIP switch settings, and connection diagrams.
	Aratohu Tāutanga Atanga CAN-Bus Hi-Beam CANHBVX1 \| Connects2 Comprehensive installation guide for the Connects2 CANHBVX1 Hi-Beam CAN-Bus Interface. This device allows control of additional high-current accessories, such as lighting, using the vehicle's existing high beam controls. Features include constant output, variable output, and 'follow me home' functionality. Designed for easy plug-and-play installation. Compatible with Vauxhall Movano models from 2010 onwards.