Pukapuka Kaiwhakamahi mō te Pūwhakaata DLP Kawe InFocus IN112

1. Kupu Whakataki

This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.

2. He aha kei roto i te Pouaka

Manatokohia ko nga mea katoa kua whakarārangihia i raro nei kei roto i to kete hua:

• Pūwhakaata InFocus IN112
• taura hiko
• RGB cable (VGA cable)
• A/V cable (Composite Video cable)
• Nga tohutohu haumaru
• pukapuka kaiwhakamahi (tenei tuhinga)
• Mana mamao

3. Te Pouwhitiwhitiview

Whakaahua 1: Runga View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

Whakaahua 2: Taha View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

Whakaahua 3: Koki View me Remote - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

Whakaahua 4: Whakamuri View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.

4. Tatūnga

4.1 Whakanoho

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.

4.2 Hononga Hiko

1. Connect the supplied power cord to the projector's power inlet.
2. Monohia tetahi pito o te taura hiko ki tetahi putanga hiko kua oti te tu.

4.3 Te Hono i nga Puna Whakauru

The IN112 projector offers multiple input options:

• VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
• Ataata Hiato: Use the A/V cable to connect to devices with composite video output.
• S-Ataata: Connect to devices with S-Video output.
• Ororongo ki: Connect external audio sources using a 3.5mm stereo cable.
• RS232C: For control and automation systems.
• USB B Mini: For control and firmware updates.

Ensure all cables are securely connected before powering on the projector.

5. Nga Tohutohu Whakahaere

5.1 Hiko / Whakaweto

• Hei whakakaha, pehia te Mana button on the control panel or remote control. The power indicator light will illuminate.
• Hei whakaweto, pehia te Mana button again. Confirm shutdown if prompted. Allow the projector to cool down before unplugging.

5.2 Whakatika Atahanga

• Arotahi: Hurihia te mowhiti arotahi i runga i te karu o te pūwhakaata kia koi, kia mārama hoki te ahua.
• Te Tohu: Whakamahia te Kohatu matua buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.

5.3 Kōwhiringa Pūtake

Pehia te Puna button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).

5.4 Whakatere Tahua

Pehia te Tahua/Putaatu pātene hei uru atu ki te tahua whakaaturanga mata (OSD). Whakamahia ngā pātene pere hei whakatere me te Tīpakohia or Tomo pātene hei whakaū i ngā kōwhiringa. Perehi Tahua/Putaatu again to close the menu.

5.5 Aratau Eco

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.

5.6 3D Content Projection

The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.

6. Tiaki

6.1 Lamp Whakakapinga

Ko te pūwhiti lamp he wa mutunga kore. I te wa o te lamp tohu (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.

Tupato: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.

6.2 Te horoi

The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.

7. Te Raru

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

9.1 Hua Whakatau

The InFocus IN112 projector is backed by a comprehensive warranty:

• 5-tau iti pūtāhui i runga i te pūwhiti.
• 2-tau te roa o te raihana te hipoki i nga waahanga me te mahi.
• 6-marama whakamana i runga i te lamp.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus webpae.

9.2 Tautoko Hangarau

For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official webpae, i roto ranei i nga tuhinga kua whakauruhia.

10. Related Product Information (IN130 Series)

Ko te ataata e whai ake nei e whakarato ana i te mutungaview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.