1. Kupu Whakataki
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Wayne CDU980E 3/4 HP Submersible Sump Pump. Please read all instructions carefully before use and retain this manual for future reference.
Figure 1: Wayne CDU980E 3/4 HP Submersible Sump Pump
2. Nga korero haumaru
WARNING: Risk of electric shock. This pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded grounding-type receptacle.
- Me momotu te hiko mai i te papu i mua i te whakahaere, i te mahi rānei.
- Kaua e whakahaerehia te papu i roto i te hau pahū.
- Ensure the electrical circuit is protected by a Ground Fault Circuit Interrupter (GFCI).
- Do not use this pump for pumping flammable or corrosive liquids.
- Keep hands clear of the pump intake and discharge openings when the pump is connected to power.
- This pump is designed for indoor use only in sump pits.
3. Ihirangi mokete
Manatokohia kei te noho katoa nga waahanga me te kore e pakaru:
- Wayne CDU980E Sump Pump with Integrated Vertical Float Switch
- Pukapuka Tohutohu
4. Nga waahanga matua
- 3/4 HP Motor: Capable of moving up to 5,490 gallons per hour (GPH).
- Hanga Roa: Features corrosion-resistant stainless steel motor housing and fasteners with a cast-iron volute for extended life.
- Pātene Whakarewa Poutū Whakauru: Designed for reliable automatic operation, tested to 1 million cycles.
- Top Suction Design: Helps prevent air lock and minimizes clogging from debris at the bottom of the sump pit.
- 1-1/2 inch NPT Discharge: Standard size for compatibility with common plumbing codes.
- Tāutatanga ngawari: Designed for quick setup, typically within 15 minutes, without the need to drill a weep hole.
Figure 2: Key Features of the Wayne CDU980E
5. Tatūnga me te Tāuta
The Wayne CDU980E sump pump is designed for installation in 11-inch diameter or larger sump pits. Follow these steps for proper installation:
- Prepare the Sump Pit: Ensure the sump pit is clean and free of debris. The pump should sit on a solid, level surface.
- Connect Discharge Pipe: Thread a 1-1/2 inch NPT discharge pipe into the pump's outlet. Use appropriate sealant for a watertight connection.
- Tāuta Takitaki taki: Install a check valve in the discharge line above the pump to prevent water from flowing back into the sump pit when the pump shuts off.
- Whakanohoia te Pump: Carefully lower the pump into the sump pit. Ensure the float switch can move freely without obstruction from the pit walls or other pipes.
- Hononga Hiko: Plug the pump into a properly grounded 120V, 60Hz electrical outlet protected by a GFCI. Ensure the power cord is routed to prevent damage.
- Mahi Whakamatau: Pour water into the sump pit to verify the float switch activates the pump and discharges water correctly.
Figure 3: Typical Sump Pump Installation
Ka mutu te whakaurungaview Ataata
Ataata 1: Kua mutuview of a similar Wayne sump pump, demonstrating its features and installation considerations. This video is provided by the manufacturer.
6. Nga Tohutohu Whakahaere
The Wayne CDU980E operates automatically via its integrated vertical float switch. When water in the sump pit rises and lifts the float to the 'ON' level (approximately 9 inches), the pump will activate and begin discharging water. Once the water level drops and the float returns to the 'OFF' level (approximately 4 inches), the pump will shut off. This automatic operation ensures your basement remains dry without constant manual intervention.
Figure 4: Wayne CDU980E Sump Pump Label
7. Tiaki
Regular maintenance helps ensure the longevity and reliable operation of your sump pump:
- Tirotiro auau: Periodically check the sump pit for debris that could obstruct the float switch or pump intake.
- Mata Horoi Whakauru: Ensure the pump's intake screen is clear of leaves, dirt, or other foreign objects.
- Test Float Switch: Manually lift the float switch to ensure the pump activates and deactivates correctly. This should be done monthly, especially during rainy seasons.
- Check Discharge Line: Verify that the discharge pipe is not clogged or frozen, especially in colder climates.
- Tirohanga Waea Hiko: Tirohia te taura hiko mō ngā tohu o te pakaru, o te kakahu rānei.
8. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e rere te papu | No power; tripped GFCI; stuck float switch; motor failure. | Check power supply and GFCI. Clear float switch. Consult a qualified technician for motor issues. |
| Ka rere tonu te papu | Te pana pōtae e mau ana; te pakaru o te takirere tirotiro; te rere tonu o te wai. | Clear float switch. Inspect/replace check valve. Address source of continuous water. |
| Pump runs but no water discharges | Clogged intake or discharge pipe; air lock; low water level. | Clear obstructions. Ensure pump is fully submerged. Check for weep hole (not needed for this model, but common issue). |
| He haruru te papu, he nui rawa rānei te wiri | Debris in impeller; pump not stable; worn bearings. | Disconnect power and inspect impeller for debris. Ensure pump is on a stable surface. Contact support for internal issues. |
9. Whakatakotoranga
Figure 5: Wayne CDU980E Product Dimensions
| Huanga | Uara |
|---|---|
| Waitohu | Wayne |
| Tau tauira | CDU980E (58321-WYN3) |
| Horsepower | 0.75 HP |
| Rere Rere Morahi | 5490 GPH (92 Karani ia Miniti) |
| Te Taha Tika Rawa | 32 Puawai |
| Voltage | 120 Volts |
| Puna Mana | Hiko Hiko |
| Rauemi | Cast Iron and Stainless Steel |
| Hunga Hua | 10.5"L x 9"W x 11"H |
| Taumaha Tūemi | 12 Pauna |
| Nga waahanga motuhake | Integrated Vertical Float Switch, Easy to Install |
Figure 6: Performance Data for CDU980E
10. Pūtāhui me te Tautoko
The Wayne CDU980E Submersible Sump Pump comes with a 5 Tau Rarangi a te Kaihanga. For warranty claims, technical assistance, or replacement parts, please contact Wayne Water Systems customer support. Refer to the contact information provided in your product packaging or visit the official Wayne webpae.
Kaihanga: Wayne Water Systems
