DEWALT D26200-QS Compact Fixed Base Router Instruction Manual

1. Nga Tohutohu Haumaru

Always observe basic safety precautions when using electrical tools to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before operating this tool.

Whakatupato Haumaru Utauta Hiko Whanui

• Haumaru Wāhi Mahi: Kia ma te waahi mahi me te whakamarama pai. Ko nga waahi pouri, nga waahi pouri ranei ka pa mai nga aitua. Kaua e whakamahia nga taputapu hiko i roto i nga hau pupuhi, penei i te waahi o te wai ka mura, te hau, te puehu ranei.
• Haumaru Hiko: Me rite nga mono taputapu hiko ki te putanga. Kaua rawa e whakarereketia te mono i tetahi huarahi. A ape i te pa atu ki te tinana ki nga papa whenua, ki runga ranei i te whenua penei i te paipa, te radiators, te awhe, me te pouaka whakamatao.
• Haumaru Whaiaro: Always wear eye protection. Use safety equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection when appropriate. Stay alert, watch what you are doing, and use common sense when operating a power tool.
• Te Whakamahi me te Tiaki Taputapu: Kaua e kaha te taputapu hiko. Whakamahia te taputapu hiko tika mo to tono. Momotuhia te mono mai i te puna hiko i mua i te whakarereketanga, te whakarereke i nga taputapu, te penapena taputapu hiko ranei.

Router Specific Safety

• Ensure the router bit is securely tightened in the collet before operation.
• Puritia te pouara ki ngā ringa e rua i ngā wā katoa e whakamahia ana.
• Keep hands clear of the router bit during operation.
• Me whakarite kia mau te taputapu mahiamped i mua i te ararere.
• Never start the router with the bit in contact with the workpiece.

2. Hua Neke Atuview

The DEWALT D26200-QS is a 900W compact fixed base router designed for precision woodworking tasks. It features electronic speed control, a robust D-base, and integrated LED lighting for enhanced visibility.

Whakaahua 1: DEWALT D26200-QS Compact Fixed Base Router. This image shows the complete router unit, highlighting its compact design and yellow and black color scheme.

Nga waahanga matua

• Motika Kaha: 900W motor provides ample power for various routing applications.
• Mana Tere Hiko: Full wave electronic speed control with feedback maintains selected speed under load, ensuring consistent results in timber, aluminum, and plastics.
• Te Huringa Kounga: Adjustable speed from 16,000 to 27,000 RPM for optimal control across different materials and bits.
• D-Base Design: Large 100mm D-Base offers maximum router support on the workpiece, enhancing stability and control.
• Nga Rarama LED: Integrated dual LED lights illuminate the work area, increasing visibility around the router bit for improved accuracy.

Wae Matua

1. Whakawhiti Kaha: On/Off toggle for tool activation.
2. Waea Whakahaere Tere: Adjusts the rotational speed of the router bit.
3. Collet: Holds the router bit securely.
4. turanga: Provides a stable platform for routing and includes depth adjustment mechanisms.
5. Depth Adjustment Ring: Allows for precise setting of routing depth.

Whakaahua 2: Kati-ake view of the power switch on the DEWALT D26200-QS router, showing the 'ON' and 'OFF' positions.

Whakaahua 3: Kati-ake view of the speed control dial on the DEWALT D26200-QS router, indicating various speed settings.

3. Tatūnga

Te wetewete

Carefully remove the router and all accessories from the packaging. Inspect the tool for any damage that may have occurred during transit. Retain packaging materials for future storage or transport.

Installing Router Bits

1. Me mohio kua wetekina te pouara mai i te puna hiko.
2. Pēhia me te pupuri i te paatene maukati miro.
3. Wewetehia te nati collet ma te whakamahi i te wiwi kua whakaratohia.
4. Insert the router bit into the collet, ensuring at least 3/4 of the shank is seated. Do not bottom out the bit.
5. Tighten the collet nut firmly with the wrench while holding the spindle lock.

Whakaahua 4: Close-up of the router base and collet area, illustrating where the router bit is inserted and secured.

Te Whakatikatika i te Hohonu Ararere

1. With the router unplugged and the bit installed, place the router on a flat surface.
2. Wewetehia te turanga clampTuhinga o mua.
3. Rotate the depth adjustment ring to raise or lower the motor assembly until the desired bit protrusion is achieved.
4. Use the fine adjustment knob for precise depth settings.
5. Whakapaia te turanga clamping lever to secure the depth setting.

Hononga Tango Puehu

For cleaner operation and improved visibility, connect a suitable dust extraction system to the router's dust port. Ensure the hose is securely attached and does not interfere with the router's movement.

4. Nga Tohutohu Whakahaere

Te Hia/Weto

To turn the router ON, push the power switch to the 'ON' position. To turn it OFF, push the switch to the 'OFF' position. The router features a soft start to prevent sudden jolts upon startup.

Kōwhiringa Tere

Rotate the speed control dial (Figure 3) to select the appropriate RPM for your material and router bit. Lower speeds are generally used for larger diameter bits, harder materials, or when making deeper cuts. Higher speeds are suitable for smaller bits and softer materials.

Routing Techniques

• Edge Routing: For routing edges, ensure the router base is fully supported on the workpiece. Use a fence or guide for straight cuts.
• Aronga Tapahi: Always feed the router into the workpiece against the rotation of the bit. This provides better control and prevents the router from running away.
• Paahi Maha: For deeper cuts, make several shallow passes rather than one deep pass. This reduces strain on the tool and bit, and improves cut quality.

Whakaahua 5: An operator using the DEWALT D26200-QS router on a wooden workpiece, demonstrating proper handling and the use of dust extraction.

5. Tiaki

Regular maintenance ensures the longevity and optimal performance of your DEWALT D26200-QS router.

Te horoi

• Wewetehia te taputapu i mua i te horoi.
• Use a soft brush or compressed air to remove dust and debris from the motor vents and around the collet area.
• Wipe the exterior of the tool with a damp kakahu. Kaua e whakamahi i nga matū kino me nga horoi horoi.

Whakakapinga moka

Replace dull or damaged router bits promptly. Using sharp bits improves cut quality and reduces strain on the motor. Follow the bit installation procedure outlined in Section 3.

Te tirotiro

• Tirohia te taura hiko i ia wā, i ia wā, mēnā he pakaru. Mēnā kua pakaru, me whakakapi e te tohunga hangarau whai tohu.
• Tirohia te pūmau o ngā tīwiri me ngā here katoa.
• Ensure the base clamping lever operates smoothly and securely.

6. Te Raru

7. Whakatakotoranga

Technical data for the DEWALT D26200-QS Compact Fixed Base Router:

Whakaahua 6: The DEWALT D26200-QS router with key dimensions indicated, showing its height and width.

8. Raihana me te Tautoko

Nga korero Whakaputanga

This DEWALT D26200-QS router comes with a 2-tau pūtāhui e whakaratohia ana e te kaiwhakanao mai i te ra o te hoko. Tena koa pupurihia to tohu mo te hoko mo nga kereme whakamana.

Tautoko Kiritaki

For any warranty-related issues, product feedback, or technical assistance, please contact DEWALT customer care:

• Tau Tiaki Kiritaki: 1860-425-1111
• Nga haora mahi: 10 i te ata ki te 5 i te ahiahi, Mane ki te Paraire (haunga ngā hararei kāwanatanga)

You may also visit the official DEWALT website for additional resources and service center locations.