Sharp Cyclone Vacuum Cleaner EC-CT12-C User Manual

1. Hua Neke Atuview

The Sharp EC-CT12-C is a bagless cyclone vacuum cleaner designed for efficient cleaning of various floor types. It features a powerful centrifugal cyclone system for dust separation and a turbine head for effective debris collection.

Figure 1: Assembled Sharp EC-CT12-C Cyclone Vacuum Cleaner.

2. Nga Tohutohu Haumaru

Before operating the vacuum cleaner, please read and understand all safety instructions to prevent electric shock, fire, or injury.

• Whakaritehia te voltage matches the rating indicated on the vacuum cleaner.
• Kaua e whakamahi i te kai horoi korehau ki runga i nga papa makuku, ki te kohi wai ranei.
• Kaua e kohia nga mea tahu, kai paipa ranei, penei i te hikareti, te mati, te pungarehu wera ranei.
• Tiakina nga makawe, nga kakahu taratara, nga maihao, me nga wahanga katoa o te tinana mai i nga tuwhera me nga waahanga neke.
• Unplug the appliance from the electrical outlet before cleaning or performing maintenance.
• Kaua e whakahaeretia te kai horoi korehau me te taura pakaru, te mono ranei.

3. Tatūnga me te Runanga

The Sharp EC-CT12-C requires minor assembly before first use. Follow these steps:

1. Whakauruhia te Hose: Insert the flexible hose into the suction port on the main unit until it clicks securely into place.
2. Connect the Extension Wand: Attach the extension wand to the end of the flexible hose.
3. Install the Floor Head: Connect the turbine floor head to the end of the extension wand. Ensure it is firmly attached.

Figure 2: Main vacuum unit with detached turbine floor head, ready for assembly.

Once assembled, extend the power cord and plug it into a suitable electrical outlet.

4. Nga Tohutohu Whakahaere

To operate your Sharp EC-CT12-C vacuum cleaner:

1. Hiko Whakaka/Weto: Press the power button located on the main unit or handle to turn the vacuum cleaner on or off.
2. Whakaritea te Mana Momo: The vacuum cleaner features 3 power levels. Adjust the suction power as needed for different cleaning tasks and floor types. A lower setting is suitable for delicate surfaces, while a higher setting provides maximum suction for heavily soiled areas.
3. Using the Turbine Head: The turbine head utilizes wind power to rotate its brush, effectively collecting debris from carpets and hard floors. For certain floor conditions, the brush rotation may temporarily stop. The turbine head also includes a wipe function suitable for various floor types, including tatami mats.
4. Eco-Cleaning Mode: This mode adjusts power consumption based on the cleaning operation and floor type, optimizing energy use.
5. Ma te whakamahi i nga taapiri: For specific cleaning tasks, detach the floor head and attach appropriate accessories (not specified in provided data, but generally include crevice tools, upholstery brushes).

5. Tiaki

Ko te tiaki i nga wa katoa ka tino pai te mahi me te whakaroa i te oranga o to kai horoi korehau.

5.1 Whakamutuhia te Kapu Puehu

The EC-CT12-C features a one-touch detachable dust cup for easy emptying.

1. Me whakarite kua wetekina te kai horoi korehau.
2. Press the release button to detach the dust cup from the main unit.
3. Hold the dust cup over a trash receptacle and open the bottom lid to empty collected dust and debris.
4. Close the lid and reattach the dust cup to the main unit until it clicks securely.

Figure 3: Detached dust cup from the main vacuum unit, showing the cyclone mechanism.

5.2 Te horoi i te Tātari HEPA

The HEPA clean filter effectively captures fine dust. It is designed for easy cleaning.

1. Tangohia te horoi horoi.
2. Tangohia te kapu puehu pera i te korero i runga ake nei.
3. Locate the HEPA filter within the dust cup assembly.
4. Turn the knob to easily clean the filter. Refer to the markings on the filter for specific cleaning instructions (e.g., tapping out dust, rinsing if applicable and allowing to dry completely).
5. Me whakarite kia maroke rawa te taatari i mua i te whakakao ano.

5.3 Te horoi i te Paraihe Roll

Periodically inspect and clean the brush roll in the turbine head to remove tangled hair or debris.

1. Tangohia te horoi horoi.
2. Detach the turbine floor head from the extension wand.
3. Turn the floor head over to access the brush roll.
4. Use scissors or a brush to carefully cut and remove any tangled hair or fibers from the brush roll.
5. Ensure the brush roll spins freely before reattaching the floor head.

Whakaahua 4: Raro view of the turbine floor head, showing the brush roll for cleaning.

6. Te Raru

If you encounter issues with your Sharp EC-CT12-C, refer to the following common troubleshooting steps:

• Kore Mana:
  • Tirohia mehemea kua honoa te taura hiko ki tetahi putanga mahi.
  • Ensure the power button is pressed.
  • Takina to wehenga ara iahiko whare.
• Ngaronga o te Momo:
  • Putua te kapu puehu ki te ki tonu.
  • Clean the HEPA filter as described in Section 5.2.
  • Check the hose, wand, and floor head for blockages.
  • Ensure all connections (hose, wand, floor head) are secure.
• Haruru rereke:
  • Turn off and unplug the vacuum. Inspect the brush roll for obstructions.
  • Check for any foreign objects lodged in the hose or floor head.
• Brush Roll Not Rotating:
  • Clean the brush roll as described in Section 5.3.
  • Ensure the floor head is properly attached.
  • Note that the turbine head's brush rotation may stop depending on the floor surface.

If the problem persists after performing these checks, contact Sharp customer support.

7. Whakatakotoranga

Figure 5: Approximate size comparison of the vacuum cleaner.

8. Pūtāhui me te Tautoko

Mōhiohio Pūtāhui: This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.

Tautoko Kiritaki: For technical assistance, spare parts, or warranty service, please contact Sharp customer support. You can find contact information on the official Sharp webpae, na roto ranei i nga tuhinga e whakaratohia ana me to hua.

Visit the official Sharp Store for more information: Toa Sharp i runga i a Amazon