Actiontec Q1000 Wireless N VDSL Modem Router

1. Kupu Whakataki

The Actiontec Q1000 is a high-performance Wireless N VDSL Modem Router designed to provide reliable internet connectivity for your home or small office. It combines a VDSL2 modem and a full-featured 802.11n wireless router into a single device, offering fast internet access and a secure wireless network. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Q1000 modem router.

2. Ihirangi mokete

Tena koa tirohia kei roto katoa nga taonga kei roto i to kete:

• Actiontec Q1000 Wireless N VDSL Modem Router
• Pūurutau Hiko
• Waea Itarangi (RJ-45)
• DSL Cable (RJ-11)
• Aratohu Timata Tere (mehemea kei roto)

3. Tino Tinoview

Familiarize yourself with the ports, buttons, and indicator lights on your Actiontec Q1000 modem router:

• Tauranga DSL: Connects to your VDSL line from the wall jack.
• Ethernet LAN Ports (x4): Connects to computers, gaming consoles, or other network devices via Ethernet cables.
• Tauranga Hiko: Ka hono ki te urutau hiko whakauru.
• Patene Tautuhi Anō: I whakamahia hei whakaora i nga tautuhinga taunoa wheketere (penei me te pupuri mo te 10 hēkona).
• Pātene WPS: For easy wireless connection setup with WPS-enabled devices.
• Tohu LED: Lights on the front panel indicate the status of power, DSL connection, Internet activity, wireless network, and Ethernet port activity.

4. Tatūnga

4.1 Hononga Miihini

1. Connect one end of the DSL cable to the DSL port on the Q1000 and the other end to your wall DSL jack.
2. Connect one end of the Ethernet cable to any LAN port on the Q1000 and the other end to your computer's Ethernet port.
3. Connect the power adapter to the Power port on the Q1000 and plug the other end into a power outlet.
4. Wait for the Power, DSL, and Internet LEDs to turn solid green, indicating a successful connection.

4.2 Whirihoranga Tuatahi (Web Atanga)

To configure your modem router, access its web-atanga whakahaere i runga:

1. Tuwhera a web pūtirotiro i runga i tō rorohiko hono.
2. I roto i te pae wāhitau, pato http://192.168.0.1/ ka pehi i te tomo.
3. You may be prompted for a username and password. Refer to the label on the bottom of your device for default credentials.
4. Once logged in, you will see the modem's configuration page, similar to the image below.

Figure 1: Actiontec Q1000 Web Interface. The left panel shows the main configuration options (Wireless Setup, Utilities, Advanced Setup), while the right panel displays modem parameters and status, including Firmware Version, Model Number (Q1000), Serial Number, and connection details.

Follow the on-screen wizard or navigate to the appropriate sections to enter your ISP details (e.g., PPP User Name, ISP Protocol) and configure your wireless network (SSID, password, security type).

5. Mahi

5.1 Whirihoranga Whatunga Ahokore

To customize your Wi-Fi settings:

• Takiuru ki te web atanga (http://192.168.0.1/).
• Whakatere ki te Tatūnga Ahokore wahanga.
• Change the Network Name (SSID) and Wireless Password (WPA/WPA2-PSK recommended).
• Save your changes. Your wireless devices will need to reconnect using the new password.

5.2 Tautuhinga Arā Atu Anō

Ko te Tatūnga Arā Atu Anō section allows configuration of features such as Port Forwarding, Firewall rules, DNS settings, and DHCP server options. Consult the detailed online manual or your ISP for specific advanced configurations.

6. Tiaki

6.1 Whakahoutanga Firmware

Periodically check the Actiontec support website for firmware updates. Firmware updates can improve performance, add new features, and fix bugs. Follow the instructions provided with the firmware download carefully to avoid damaging the device.

6.2 Tautuhi Tautuhi

If you encounter persistent issues or forget your login credentials, you can perform a factory reset:

• With the modem router powered on, locate the small Tautuhi Anō button on the back or bottom of the device.
• Use a paperclip or a similar pointed object to press and hold the button for approximately 10 seconds.
• Release the button when the LEDs flash or the device reboots.
• The modem router will revert to its original factory settings, and you will need to reconfigure it.

7. Te Raru

Anei nga otinga mo nga take noa ka pa ki a koe:

• Kaore he Hononga Ipurangi:
  • Check all cable connections (DSL, Ethernet, Power).
  • Verify that the DSL and Internet LEDs are solid green. If not, contact your ISP.
  • Ensure your ISP credentials are correctly entered in the modem's web atanga.
  • Restart the modem router by unplugging the power adapter for 30 seconds and then plugging it back in.
• Tere Ipurangi Pōturi:
  • Ensure your modem router is placed in a central location, away from obstructions and interference sources (e.g., cordless phones, microwaves).
  • Check if multiple devices are heavily using the network.
  • Perform a speed test and compare with your subscribed speed. If significantly lower, contact your ISP.
• Kaore e taea te uru Web Atanga:
  • Ensure your computer is connected to the modem router via Ethernet or Wi-Fi.
  • Manatokohia kua whakaritea nga tautuhinga IP o to rorohiko kia whiwhi aunoa i tetahi wahitau IP (DHCP).
  • Whakamātauria he rerekē web pūtirotiro.
  • Perform a factory reset if you suspect incorrect network settings or forgotten credentials.

8. Whakatakotoranga

9. Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the documentation included with your product or visit the official Actiontec webpae. Puritia to rihiti hoko mo nga kereme whakamana.