Pukapuka Kaiwhakamahi mō te Whakaranu DJ Gemini CNTRL-7

Kupu Whakataki

The Gemini CNTRL-7 DJ Mixer is a versatile and powerful DJ controller designed for professional mixing. It offers a comprehensive set of features for controlling various DJ software, providing an intuitive and tactile experience for DJs. This manual provides detailed instructions on setting up, operating, and maintaining your CNTRL-7 DJ Mixer.

Nga waahanga matua

• Fully mappable MIDI for compatibility with various DJ software (Traktor, Virtual DJ, Algoriddim, MixVibes).
• Two individual channels with touch-sensitive jog wheels for Search, Cue, and Scratch functions.
• Pitch Control slide for fine-tuning pitch and tempo.
• Sync button for automatic beat matching.
• 3-Band EQ, Master Volume, Channel Volume, and Channel Rotary Gain controls.
• Crossfader with adjustable slope for seamless mixing.
• Stereo VU Meter for monitoring decibel levels.
• Dedicated Loop Section with Loop Adjust.
• Sampler Section with dedicated volume control and support for custom samples.
• Effects Section with parameter controls and built-in effects like Flanger, Filter, and Reverb (software dependent).
• Integrated 16-bit/44.1kHz soundcard with versatile connectivity options.

Nga Mana me nga Waahanga

Familiarize yourself with the various controls and connection points of your Gemini CNTRL-7 DJ Mixer.

Paepae Runga Nekeview

This image displays the top panel of the Gemini CNTRL-7 DJ Mixer. It features two large, touch-sensitive jog wheels on either side, a central mixer section with channel faders, a crossfader, and various knobs for EQ, gain, and effects. Above the jog wheels are performance pads and transport controls. The overall layout is designed for intuitive DJ control.

• 1. Jog Wheels: Touch-sensitive for scratching, cueing, and searching.
• 2. Channel Faders: Control the volume of each individual channel.
• 3. Whakawhitiwhiti: Blends audio between Channel 1 and Channel 2. Features an adjustable slope.
• 4. EQ Knobs: (High, Mid, Low) Adjust the frequency response for each channel.
• 5. Gain Knobs: Whakatikatikahia te taumata tāuru mō ia hongere.
• 6. Pitch Control: Slider to adjust the playback speed (BPM) of the track.
• 7. Sync Button: Automatically matches the tempo of tracks.
• 8. Loop Section: Controls for setting and adjusting loops.
• 9. Sampler Section: Buttons and knobs for triggering and controlling samples.
• 10. Effects Section: Controls for applying and adjusting software effects.
• 11. Rōrahi Matua: Whakahaerehia te rōrahi whakaputa whānui.
• 12. VU Meter: Displays the audio output level.

Hononga Paewhiri Whakamuri

This image shows the rear panel of the Gemini CNTRL-7 DJ Mixer, highlighting its comprehensive connectivity options. From left to right, it includes switchable Line/Phono inputs for external audio sources, RCA outputs for recording, master, and booth monitoring, a USB port for computer connection, and balanced XLR outputs for professional audio systems. A power input jack is also visible.

• 1. Channel 1 & 2 Inputs (RCA): Switchable between Line and Phono for connecting turntables or other audio devices.
• 2. Record Output (RCA): Hei hono atu ki tētahi pūrere hopu oro.
• 3. Master Output (RCA): Main audio output for connecting to a PA system or ampkaikawe
• 4. Booth Output (RCA): For connecting to a monitor speaker in the DJ booth.
• 5. Tauranga USB: Connects the mixer to your computer for MIDI control and audio interface functions.
• 6. Whakauru Hiko: Whakauruhia te hononga hiko whakauru ki konei.
• 7. Balanced Output (XLR): Professional-grade audio outputs for connecting to high-quality sound systems.

Hononga Paewhiri Mua

This image displays the front edge of the Gemini CNTRL-7 DJ Mixer. It features a headphone output jack (1/4-inch and 1/8-inch), a headphone volume control, cue mix controls, and a microphone input with its own volume control. These connections are easily accessible for live performance monitoring and vocal integration.

• 1. Putanga Puoro: (1/4-inch and 1/8-inch) For connecting headphones.
• 2. Rōrahi Pūoro: Whakaritea te rōrahi o te putanga o te taringa.
• 3. Cue Mix: Adjusts the balance between the master output and the cued channel in your headphones.
• 4. Microphone Input: (XLR/TRS Combo) For connecting a microphone.
• 5. Mic Volume: Ka whakarerekē i te oro o te tāuru hopuoro.

Aratohu Tatūnga

1. Tāuta Pūmanawa: Install your preferred DJ software (e.g., Virtual DJ, Traktor, Algoriddim, MixVibes) on your computer. Ensure the software is compatible with MIDI controllers.
2. Tūhono USB: Connect the Gemini CNTRL-7 to your computer using the supplied USB cable. The unit will be recognized as a MIDI device and an audio interface.
3. Connect Audio Outputs:
   • For professional setups, connect the Nga Putanga XLR Taurite to your PA system or studio monitors.
   • I tua atu, whakamahia te Master RCA Outputs ki te hono ki tetahi ampkaiwhakaoho, kaikorero hiko ranei.
   • Honoa te Booth RCA Outputs to your DJ booth monitor speakers if desired.
   • Honoa te Record RCA Output to a recording device if you plan to record your mixes.
4. Connect Audio Inputs (Optional): If using external audio sources like turntables or CDJs, connect them to the respective Channel 1 & 2 RCA Inputs. Ensure the Line/Phono switch is set correctly for each input.
5. Tūhono Pūoro (Kōwhiringa): Monohia to hopuoro ki te Whakauru Mic i runga i te rarangi o mua.
6. Tūhono Pūoro: Plug your headphones into either the 1/4-inch or 1/8-inch Putanga Puoro i runga i te rarangi o mua.
7. Whakahiko: Connect the power adapter to the Power Input on the rear panel and then to a power outlet. Turn on the unit.
8. Whirihoranga Pūmanawa: Open your DJ software and configure its audio and MIDI settings to recognize the Gemini CNTRL-7 as your primary audio device and MIDI controller. Refer to your software's manual for specific instructions on MIDI mapping and audio routing.

Nga Tohutohu Whakahaere

Basic Mixing

• Loading Tracks: Use your DJ software to load tracks onto Deck 1 and Deck 2.
• Volume Rere: Adjust the Channel Faders to control the volume of each track.
• Whakawhitiwhiti: Move the Crossfader left or right to blend between the two channels. Adjust the Crossfader Slope switch to change the fade curve.
• Whakatikatika EQ: Use the 3-Band EQ knobs (High, Mid, Low) for each channel to shape the sound of your tracks.
• Mana Whiwhi: Use the Gain knobs to adjust the input level of each channel, ensuring optimal signal without clipping. Monitor the VU Meter.
• Rōrahi Matua: Adjust the Master Volume knob to control the overall output level of your mix.

Beat Matching and Cueing

• Ngā Wira Oma:
  • raraku: Touch the top surface of the jog wheel to scratch the track.
  • Nudge/Pitch Bend: Touch the side of the jog wheel to temporarily speed up or slow down the track for beat matching.
  • Rapu: Rotate the jog wheel without touching the top surface to quickly navigate through the track.
• Mana Pitch: Use the Pitch Control slider to manually adjust the tempo (BPM) of a track.
• Pene Tukutahi: Press the Sync button to automatically match the BPM of the current track to the master track.
• Te tohu: Use the Cue buttons to set and recall cue points within your tracks. Use the Headphone Volume and Cue Mix knobs to monitor tracks in your headphones before playing them live.

Creative Functions

• Loop Section: Use the controls in the Loop Section to create and adjust loops on the fly.
• Sampler Section: Whakaoho i ngā mea kua utaina i muaamples or load your own custom sampte whakamahi i te Sampler controls. Adjust the sampler volume as needed.
• Wāhanga Pānga: Apply and manipulate various effects (e.g., Flanger, Filter, Reverb) provided by your DJ software using the dedicated Effects controls.

Te tiaki

• Te horoi: Regularly wipe the unit with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Avoid using abrasive cleaners, solvents, or waxes.
• Parenga puehu: When not in use, cover the unit to protect it from dust and debris, which can affect faders and buttons.
• Rokiroki: Whakaorangia te waeine ki te waahi makariri, maroke atu i te ra tika me te wera nui.
• Whakaha Uepu: Ensure cables are not kinked or strained, which can lead to damage over time.

Raparongoā

Whakatakotoranga

Pūtāhui me te Tautoko

The Gemini CNTRL-7 DJ Mixer comes with a 90-ra whakamana mai i te ra o te hokonga. Ka kapi tenei raihana i nga hapa o te hanga me te whakarite kia pai te mahi o nga hua i raro i te whakamahinga noa.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Gemini customer support. Refer to the official Gemini webpae mo nga korero whakapā hou me nga rauemi tautoko.

Tena koa pupurihia to tohu mo te hoko mo te whakamana whakamana.